[Question]<PSRAM ID read error>

[liqijian101]

The chip I use is esp32-s3-wroom-1 n4r8. When I turn on PSRAM, the prompt error is "E (205) psram: PSRAM ID read error: 0x00ffffff" .
And now I can only use USB to download programs. I can't use UART0. UART0 doesn't respond.
Luc, do you have any solutions? I look forward to your reply

[env:esp32-s3]
platform = [email protected]
board = esp32-s3-devkitc-1
;board =esp32s3box
framework = arduino
monitor_speed = 115200
monitor_flags = --echo
monitor_filters = send_on_enter, colorize, esp32_exception_decoder
board_build.f_cpu = 240000000L
board_build.mcu = esp32s3
board_build.variant = esp32s3
; set frequency to 80MHz
board_build.f_flash = 80000000L
board_build.flash_mode = qio
;uncomment and modify if board is not 4MB
;board_upload.flash_size = 16MB
;board_build.partitions = default_16MB.csv
; None
build_flags = -DCORE_DEBUG_LEVEL=0 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 -DCONFIG_IDF_TARGET_ESP32S3=1
-DBOARD_HAS_PSRAM
board_build.partitions = min_spiffs.csv
extra_scripts = pre:platformIO/extra_script.py
upload_speed = 460800
lib_ignore =
TFT_eSPI

[luc-github]

Does your board has PSRAM ?
does this sketch is working ?

#include <Arduino.h>

void setup() {
  log_d("Total heap: %d", ESP.getHeapSize());
  log_d("Free heap: %d", ESP.getFreeHeap());
  log_d("Total PSRAM: %d", ESP.getPsramSize());
  log_d("Free PSRAM: %d", ESP.getFreePsram());
}

void loop() {}

About UART0 what do you mean ? the device does not answer when flashing ? what the error ? this is not clear

[liqijian101]

that sketch can not work, it has the same error.
My board did have PSRAM.

[luc-github]

It means the PSRAM is not detected - for that ESP3D cannot do anything
Check if pins are correct for S3 as pinout change a lot https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/api-guides/external-ram.html

I suggest to raise question on ESP32 discord or gitter they may have some clue - as I does not have suche device and so never encounter the issue

[liqijian101]

I found the cause of the problem. Because the PSRAM on the chip I'm using is the OCTAL SPI, not the Quad SPI. I set up OPI PSRAM in the Arduino ide and it works. But how do I set this in platform io

[luc-github]

it seems it is dout when I flash with OPI it do --flash_mode dout but it is not enough I think
I see:

esp32s3.menu.PSRAM.disabled=Disabled
esp32s3.menu.PSRAM.disabled.build.defines=
esp32s3.menu.PSRAM.disabled.build.psram_type=qspi
esp32s3.menu.PSRAM.enabled=QSPI PSRAM
esp32s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
esp32s3.menu.PSRAM.enabled.build.psram_type=qspi
esp32s3.menu.PSRAM.`=OPI PSRAM
esp32s3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
esp32s3.menu.PSRAM.opi.build.psram_type=opi

and also

esp32s3.menu.FlashMode.opi=OPI 80MHz
esp32s3.menu.FlashMode.opi.build.flash_mode=dout
esp32s3.menu.FlashMode.opi.build.boot=opi
esp32s3.menu.FlashMode.opi.build.boot_freq=80m
esp32s3.menu.FlashMode.opi.build.flash_freq=80m
esp32s3.menu.FlashMode.opi.build.flash_type=opi

Which arduino settings are working with your PSRAM ? can you share all ?

[liqijian101]

[luc-github]

I found this https://community.platformio.org/t/how-development-esp32-s3-wroom-2/28232/3
I am not sure it is necessary to recreate a json or just added them manually and which values are necessary
at least this one should be necessary
board_build.arduino.memory_type = opi_opi

[luc-github]

have look to this issue too :
espressif/arduino-esp32#6646

Sorry I cannot help more as I do not have hw to test

[luc-github]

does it help ?

[liqijian101]

I tried that board_build.memory_type = qspi_opi or board_build.memory_type = opi_opi .
but it also has errors.

[luc-github]

you must add arduino as json has it
board_build.arduino.memory_type = opi_opi

[liqijian101]

it works. thanks very much.

board_build.arduino.memory_type = qspi_opi

[luc-github]

cool

[luc-github]

Does the cam works with ESP3D now ?

[liqijian101]

not works.
I have checked the pin of camera and it is correct. But there are no images on webui

[liqijian101]

[ESP3D][camera.cpp:40] handle_snap(): Camera stream reached
[ESP3D][camera.cpp:72] handle_snap(): Camera capture ongoing
[ESP3D][camera.cpp:75] handle_snap(): Camera capture failed
[ESP3D][camera.cpp:40] handle_snap(): Camera stream reached
[ESP3D][camera.cpp:72] handle_snap(): Camera capture ongoing
[ESP3D][camera.cpp:75] handle_snap(): Camera capture failed
[ESP3D][camera.cpp:40] handle_snap(): Camera stream reached
[ESP3D][camera.cpp:72] handle_snap(): Camera capture ongoing
[ESP3D][camera.cpp:75] handle_snap(): Camera capture failed
[ESP3D][camera.cpp:40] handle_snap(): Camera stream reached
[ESP3D][camera.cpp:72] handle_snap(): Camera capture ongoing
[ESP3D][camera.cpp:75] handle_snap(): Camera capture failed
[ESP3D][camera.cpp:40] handle_snap(): Camera stream reached
[ESP3D][camera.cpp:72] handle_snap(): Camera capture ongoing
[ESP3D][camera.cpp:75] handle_snap(): Camera capture failed

[luc-github]

did you try https://github.com/espressif/arduino-esp32/tree/master/libraries/ESP32/examples/Camera/CameraWebServer ?

[liqijian101]

it can not work.Maybe there's something wrong with my board. I'll keep checking

[liqijian101]

HI Luc.
my board can work. It is a circuit welding problem. thaks for your help.

[luc-github]

恭喜恭喜

[github-actions]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.