Documentation: Pull request for the firmware version collection in the User_Manual.md for another Hoymiles HM-300 model?

[Copro]

Should I create a pull request vor the values from the Ahoy-DTU API /api/record/info of the HM-300 microinverter for the firmware version collection in the User_Manual.md or is this no longer required?

I successfully connected to the device and wanted to give positive feedback for this awesome project!

{"inverter":[[{"fld":"FWVersion","unit":"","val":"10010.00"},
{"fld":"FWBuildYear","unit":"","val":"2020.00"},
{"fld":"FWBuildMonthDay","unit":"","val":"707.00"},
{"fld":"FWBuildHourMinute","unit":"","val":"1412.00"},
{"fld":"HWPartId","unit":"","val":"102.00"}]]}

Hardware

• ESP8266
• ESP32
• Raspberry Pi

nRF24L01+ Module

• nRF24L01+ you verified this is a Plus model capable of the required 256kBit/s mode
• square dot indicates original Nordic Semicon chip
• round dot indicates copy-cat / counterfeit SI labs chip

Antenna:

• circuit board
• external antenna (SMA)

Power Stabilization:

• 100uF Electrolytic Capacitor
  connected between +3.3V and GND (Pin 1 & 2) of the NRF Module
• Voltage stabilizing motherboard

Version / Git SHA:

Version: 0.6.9
Github Hash: 15ec6a0

Build & Flash Method:

• AhoyDTU Webinstaller
• VSCode - Platform IO
• Arduino
• ESP Tools

Debugging:

• USB Serial Log (attached)
• Setup settings (use our templates ... to be added)

[stefan123t]

@DanielR92 das ist doch in #1121 gemerged worden ? Damit sollten wir das Issue schließen können, oder ?