Is RTL8822CE compatible with Kernel 6.1

[dannyshare]

I have successfully run the RTL8822CE module in Linux kernel 5.4 with the driver codes in this repo.
But it doesn't work in Kernel 6.1 though i have put many efforts to this issue.
So, i'd like to check with you whether this RTL8822CE driver in this repo is compatible with Linux Kernel 6.1?

My usage is as below:
(1) imx6 board
(2) build RTL8822CE as M in kernel 6.1 menuconfig
(3) Each time after the board startup, four commands will be executed
insmod rtw88_core.ko insmod rtw88_pci.ko insmod rtw88_8822c.ko insmod rtw88_8822ce.ko

4. When run insmod rtw88_8822ce.ko, in most cases, the error will show as below. (few times can work)
   Detail error log is attached.

Same step (1) -(4) works very well with kernel 5.4 in same hadrware platform.

================

`root@imx6solosabresd:~/8822CE# ./insmod.sh
[ 60.541840] rtw_8822ce 0000:01:00.0: enabling device (0000 -> 0003)
[ 60.558145] rtw_8822ce 0000:01:00.0: Firmware version 9.9.4, H2C version 15
[ 60.567135] rtw_8822ce 0000:01:00.0: Firmware version 9.9.15, H2C version 15
[ 60.706697] 8<--- cut here ---
[ 60.709775] Unhandled fault: imprecise external abort (0x1406) at 0x01b77740
[ 60.716832] [01b77740] *pgd=00000000
[ 60.720421] Internal error: : 1406 [#1] PREEMPT SMP ARM
[ 60.725653] Modules linked in: rtw88_8822ce(+) rtw88_8822c rtw88_pci rtw88_core
[ 60.732991] CPU: 0 PID: 796 Comm: insmod Not tainted 6.1.22-g9c59b15a9e72 #1
[ 60.740049] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 60.746580] PC is at rtw_pci_read32+0x14/0x18 [rtw88_pci]
[ 60.752015] LR is at rtw_chip_info_setup+0x48/0x588 [rtw88_core]
[ 60.758170] pc : [<7f026048>] lr : [<7f0001c0>] psr: 60010013
[ 60.764442] sp : c1d0dd28 ip : 00000201 fp : 89344040
[ 60.769670] r10: 88b397a0 r9 : 88b3f890 r8 : 00000200
[ 60.774897] r7 : 000003da r6 : 000003d9 r5 : 7f03a2c8 r4 : 88b397a0
[ 60.781428] r3 : c09200f0 r2 : 00000000 r1 : 000000f0 r0 : 00000000
[ 60.787959] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 60.795100] Control: 10c5387d Table: 15d10059 DAC: 00000051
[ 60.800848] Register r0 information: NULL pointer
[ 60.805564] Register r1 information: non-paged memory
[ 60.810620] Register r2 information: NULL pointer

[dubhater]

It is compatible with kernel 6.1.

If you still have this problem, report it to the [email protected] mailing list.