- CR1400 series QR code reader by Code Corp.
- CortexTools (Windows only)
- rules.js file specific to InQRy (included in this repository)
- QR config codes specific to InQRy (included, also available from Code Corp Support)
- Launch the CortexTools software and connect the reader via USB
- Upon recognizing the reader, CortexTools will ask to switch it into "USB HID mode", choose yes as this is required to upload the rules file.
- After the reader finishes switching, navigate to the file using "Open File". The rules.js is prefixed with a
.(rendering it invisible), so you may find it easier to enter the path directly. - Once the rules.js file is displayed in the "Files to download to the reader" bar, click "Download File" and wait for the reader to complete the process.
- Before closing CortexTools, click the keyboard icon to switch the reader back into "USB Keyboard mode" to prepare for the config codes in the next step.
- Scan the config QR codes in the following order:
- A4 - Alternative Operating System (Linux/Mac) On
- A2 - Suffix Tab (USB Keyboard Mode Only)
- B3 - Reboot Reader
- B2 - Save All Reader Settings - Default
- Test that the reader properly scans an InQRy QR code into the New Asset page of Snipe-IT. If it does not, start by scanning the Reboot Reader code and apply the four codes in the A4-A2-B3-B2 order.
- Test that the reader maintains the configuration and properly scans InQRy codes after moving it to a new host machine.