config for an original ender 3 (not pro) with a v4.2.2 mainboard and a sprite extruder kit and a cr-touch

[doctorevil30564]

I do have a spare V2 display that is already preflashed with the correct firmware for the mriscoc professional firmware, and if necessary, I do have a spare 4.2.7 mainboard I can use instead of the 4.2.2 mainboard.

I want to compile my own firmware for the printer, but I need to know the correct x and y offsets, probe positions, etc. the current E3-pro firmware I have I can't get it to adjust where the probe is probing and I keep running into issues with the BL touch I currently have where it randomly will not probe correctly in a random spot while doing a bed level so it buries the nozzle into the bed and knocks my gantry out of alignment in relation to the base of the printer. I have gantry adjustment pieces printed out so I can realign it, but as it stands, I cannot trust the dang thing to properly probe the bed for the level. I use professional firmware on a Voxelab Aquila with a sprite extruder pro and it works well on that printer.

Thanks for any premade config files, or info you can share to help me get it compiled correctly.