CHANGELOG.md

Version 5.5.0

Summary

Adds some exciting new features (listed below) for a long awaited release!

Features

• Updates GPG signing key
• Now add additional config variables with the config_additional_variable parameter!
• Configure your management plugin with the new collect_statistics_interval parameter!
• Enjoy more robust tuning of your TCP configuration with:
  • tcp_backlog
  • tcp_sndbuf
  • tcp_recbuf

Bugfixes

• MODULES-3740 - RabbitMQ template missing important config parameter

Version 5.4.0

Summary

Adds several new parameters, features, and lots of bugfixes

Features

• Adds configuration for rabbitmq_shovel plugin including static shovels
• (MODULE-2040) Add configuration of auth_backends
• Adds the config_management_variables parameter
• Adds heartbeat parameter
• Adds rabbitmq_version fact
• Adds ipv6 support to rabbitmqadmin
• MODULES-3148: Allow shards-per-node for rabbitmq_policy definition to be integer
• Adds rabbitmq_nodename fact
• Allow passing architecture to apt::source

Bugfixes

• MODULES-2252 - fix "Command execution expired" issue
• Fixes an issue with Puppet 4+ when run from a cron job
• Updates RedHat to use yum instead of rpm
• Fixes the $file_limit parameter to allow integers
• MODULES-2252 - fix "Could not prefetch rabbitmq_exchange provider 'rabbitmqadmin': 757: unexpected token at 'fanout'" issue
• Improves error message when policy definition value is not a string
• MODULES-2645 add apt::update requirement for Debian
• Fixes pinning for apt on Debian based distros
• Updates install.pp to ensure that mnesia_base directory exists
• Fixes rabbitmqadmin url
• Updates default $package_gpg_key to https
• Fixes curl --noproxy command to set host dynamically
• Ignore system umask when generating enabled_plugins file
• Fix to skip federated queues in the output
• Updates module dependencies to use puppet-staging instead of nanliu-staging
• Fixes bug where rabbitmq_management block is created twice
• Fixes rabbitmq_parameter type check for add-forward-headers to require boolean.
• Fixes an issue when $node_ip_address is 'UNSET'
• Fixes package installation on OpenBSD
• Fixes bug that shows new user password changes on noop runs
• (MODULES-3295) Allow ssl => false without warning

2015-10-07 - Version 5.3.1

Summary

Adds a new resource type and a few ssl management parameters

Features

• Add rabbitmq_parameter type
• Add management_ssl parameter to rabbitmq class
• Add stomp_ssl_only parameter to rabbitmq class

Bugfixes

• file_limit validation and el7 management
• Fix mnesia dir not getting wiped
• Fix message-ttl and max-length integer conversion in rabbitmq_policy
• Allow managing erlang cookie without config_cluster

2015-05-26 - Version 5.3.0 [YANKED]

Summary

This is a deleted release. It did not follow semver.

2015-06-23 - Version 5.2.3

Summary

This is a patch release that updates the dependency requirements in the metadata.

2015-06-09 - Version 5.2.2

Summary

This is a bugfix to allow the rabbitmq_exchange type's internal/durable/auto_delete attributes work when they are not explicitly passed.

Bugfixes

• Fix rabbitmq_exchange create when internal/durable/auto_delete are not specified
• Start unit testing on puppet 4
• Add default value to tcp_listen_options

2015-05-26 - Version 5.2.1

###Summary This release includes a fix for idempotency between puppet runs, as well as Readme updates

####Features

• Readme updates
• Testing updates

####Bugfixes

• Ensure idempotency between Puppet runs

2015-04-28 - Version 5.2.0

###Summary This release adds several new features for expanded configuration, support for SSL Ciphers, several bugfixes, and improved tests.

####Features

• New parameters to class rabbitmq
  • ssl_ciphers
• New parameters to class rabbitmq::config
  • interface
  • ssl_interface
• New parameters to type rabbitmq_exchange
  • internal
  • auto_delete
  • durable
• Adds syncing with Modulesync
• Adds support for SSL Ciphers
• Adds file_limit support for RedHat platforms

####Bugfixes

• Will not create rabbitmqadmin.conf if admin is disabled
• Fixes check_password
• Fix to allow bindings and queues to be created when non-default management port is being used by rabbitmq. (MODULES-1856)
• rabbitmq_policy converts known parameters to integers
• Updates apt key for full fingerprint compliance.
• Adds a missing routing_key param to rabbitmqadmin absent binding call.

2015-03-10 - Version 5.1.0

###Summary This release adds several features for greater flexibility in configuration of rabbitmq, includes a number of bug fixes, and bumps the minimum required version of puppetlabs-stdlib to 3.0.0.

####Changes to defaults

• The default environment variables in rabbitmq::config have been renamed from RABBITMQ_NODE_PORT and RABBITMQ_NODE_IP_ADDRESS to NODE_PORT and NODE_IP_ADDRESS (MODULES-1673)

####Features

• New parameters to class rabbitmq
  • file_limit
  • interface
  • ldap_other_bind
  • ldap_config_variables
  • ssl_interface
  • ssl_versions
  • rabbitmq_group
  • rabbitmq_home
  • rabbitmq_user
• Add rabbitmq_queue and rabbitmq_binding types
• Update the providers to be able to retry commands

####Bugfixes

• Cleans up the formatting for rabbitmq.conf for readability
• Update tag splitting in the rabbitmqctl provider for rabbitmq_user to work with comma or space separated tags
• Do not enforce the source value for the yum provider (MODULES-1631)
• Fix conditional around $pin
• Remove broken SSL option in rabbitmqadmin.conf (MODULES-1691)
• Fix issues in rabbitmq_user with admin and no tags
• Fix issues in rabbitmq_user with tags not being sorted
• Fix broken check for existing exchanges in rabbitmq_exchange

2014-12-22 - Version 5.0.0

Summary

This release fixes a longstanding security issue where the rabbitmq erlang cookie was exposed as a fact by managing the cookie with a provider. It also drops support for Puppet 2.7, adds many features and fixes several bugs.

Backwards-incompatible Changes

• Removed the rabbitmq_erlang_cookie fact and replaced the logic to manage that cookie with a provider.
• Dropped official support for Puppet 2.7 (EOL 9/30/2014 https://groups.google.com/forum/#!topic/puppet-users/QLguMcLraLE )
• Changed the default value of $rabbitmq::params::ldap_user_dn_pattern to not contain a variable
• Removed deprecated parameters: $rabbitmq::cluster_disk_nodes, $rabbitmq::server::manage_service, and $rabbitmq::server::config_mirrored_queues

Features

• Add tcp_keepalive parameter to enable TCP keepalive
• Use https to download rabbitmqadmin tool when $rabbitmq::ssl is true
• Add key_content parameter for offline Debian package installations
• Use 16 character apt key to avoid potential collisions
• Add rabbitmq_policy type, including support for rabbitmq <3.2.0
• Add rabbitmq::ensure_repo parameter
• Add ability to change rabbitmq_user password
• Allow disk as a valid cluster node type

Bugfixes

• Avoid attempting to install rabbitmqadmin via a proxy (since it is downloaded from localhost)
• Optimize check for RHEL GPG key
• Configure ssl_listener in stomp only if using ssl
• Use rpm as default package provider for RedHat, bringing the module in line with the documented instructions to manage erlang separately and allowing the default version and source parameters to become meaningful
• Configure cacertfile only if verify_none is not set
• Use -q flag for rabbitmqctl commands to avoid parsing inconsistent debug output
• Use the -m flag for rabbitmqplugins commands, again to avoid parsing inconsistent debug output
• Strip backslashes from the rabbitmqctl output to avoid parsing issues
• Fix limitation where version parameter was ignored
• Add /etc/rabbitmq/rabbitmqadmin.conf to fix rabbitmqadmin port usage when ssl is on
• Fix linter errors and warnings
• Add, update, and fix tests
• Update docs

2014-08-20 - Version 4.1.0

Summary

This release adds several new features, fixes bugs, and improves tests and documentation.

Features

• Autorequire the rabbitmq-server service in the rabbitmq_vhost type
• Add credentials to rabbitmqadmin URL
• Added $ssl_only parameter to rabbitmq, rabbitmq::params, and rabbitmq::config
• Added property tags to rabbitmq_user provider

Bugfixes

• Fix erroneous commas in rabbitmq::config
• Use correct ensure value for the rabbitmq_stomp rabbitmq_plugin
• Set HOME env variable to nil when leveraging rabbitmq to remove type error from Python script
• Fix location for rabbitmq-plugins for RHEL
• Remove validation for package_source to allow it to be set to false
• Allow LDAP auth configuration without configuring stomp
• Added missing $ssl_verify and $ssl_fail_if_no_peer_cert to rabbitmq::config

2014-05-16 - Version 4.0.0

Summary

This release includes many new features and bug fixes. With the exception of erlang management this should be backwards compatible with 3.1.0.

Backwards-incompatible Changes

• erlang_manage was removed. You will need to manage erlang separately. See the README for more information on how to configure this.

Features

• Improved SSL support
• Add LDAP support
• Add ability to manage RabbitMQ repositories
• Add ability to manage Erlang kernel configuration options
• Improved handling of user tags
• Use nanliu-staging module instead of hardcoded 'curl'
• Switch to yum or zypper provider instead of rpm
• Add ability to manage STOMP plugin installation.
• Allow empty permission fields
• Convert existing system tests to beaker acceptance tests.

Bugfixes

• exchanges no longer recreated on each puppet run if non-default vhost is used
• Allow port to be UNSET
• Re-added rabbitmq::server class
• Deprecated previously unused manage_service variable in favor of service_manage
• Use correct key for rabbitmq apt::source
• config_mirrored_queues variable removed
  • It previously did nothing, will now at least throw a warning if you try to use it
• Remove unnecessary dependency on Class['rabbitmq::repo::rhel'] in rabbitmq::install

2013-09-14 - Version 3.1.0

Summary

This release focuses on a few small (but critical) bugfixes as well as extends the amount of custom RabbitMQ configuration you can do with the module.

Features

• You can now change RabbitMQ 'Config Variables' via the parameter config_variables.
• You can now change RabbitMQ 'Environment Variables' via the parameter environment_variables.
• ArchLinux support added.

Fixes

• Make use of the user/password parameters in rabbitmq_exchange{}
• Correct the read/write parameter order on set_permissions/list_permissions as they were reversed.
• Make the module pull down 3.1.5 by default.

2013-07-18 3.0.0

Summary

This release heavily refactors the RabbitMQ and changes functionality in several key ways. Please pay attention to the new README.md file for details of how to interact with the class now. Puppet 3 and RHEL are now fully supported. The default version of RabbitMQ has changed to a 3.x release.

Bugfixes

• Improve travis testing options.
• Stop reimporting the GPG key on every run on RHEL and Debian.
• Fix documentation to make it clear you don't have to set provider => each time.
• Reference the standard rabbitmq port in the documentation instead of a custom port.
• Fixes to the README formatting.

Features

• Refactor the module to fix RHEL support. All interaction with the module is now done through the main rabbitmq class.
• Add support for mirrored queues (Only on Debian family distributions currently)
• Add rabbitmq_exchange provider (using rabbitmqadmin)
• Add new rabbitmq class parameters:
  • manage_service: Boolean to choose if Puppet should manage the service. (For pacemaker/HA setups)
• Add SuSE support.

Incompatible Changes

• Rabbitmq::server has been removed and is now rabbitmq::config. You should not use this class directly, only via the main rabbitmq class.

2013-04-11 2.1.0

• remove puppetversion from rabbitmq.config template
• add cluster support
• escape resource names in regexp

2012-07-31 Jeff McCune [email protected] 2.0.2

• Re-release 2.0.1 with $EDITOR droppings cleaned up

2012-05-03 2.0.0

• added support for new-style admin users
• added support for rabbitmq 2.7.1

2011-06-14 Dan Bode [email protected] 2.0.0rc1

• Massive refactor:
• added native types for user/vhost/user_permissions
• added apt support for vendor packages
• added smoke tests

2011-04-08 Jeff McCune [email protected] 1.0.4

• Update module for RabbitMQ 2.4.1 and rabbitmq-plugin-stomp package.

2011-03-24 1.0.3

• Initial release to the forge. Reviewed by Cody. Whitespace is good.

2011-03-22 1.0.2

• Whitespace only fix again... ack '\t' is my friend...

2011-03-22 1.0.1

• Whitespace only fix.

2011-03-22 1.0.0

• Initial Release. Manage the package, file and service.