deps: upgrade openssl sources to 1.0.2p

This replaces all sources of openssl-1.0.2p.tar.gz into
deps/openssl/openssl

PR-URL: #22320
Reviewed-By: Rod Vagg <[email protected]>

deps/openssl/openssl/CHANGES

@@ -7,6 +7,64 @@
  https://github.com/openssl/openssl/commits/ and pick the appropriate
  release branch.
 
+ Changes between 1.0.2o and 1.0.2p [14 Aug 2018]
+
+  *) Client DoS due to large DH parameter
+
+     During key agreement in a TLS handshake using a DH(E) based ciphersuite a
+     malicious server can send a very large prime value to the client. This will
+     cause the client to spend an unreasonably long period of time generating a
+     key for this prime resulting in a hang until the client has finished. This
+     could be exploited in a Denial Of Service attack.
+
+     This issue was reported to OpenSSL on 5th June 2018 by Guido Vranken
+     (CVE-2018-0732)
+     [Guido Vranken]
+
+  *) Cache timing vulnerability in RSA Key Generation
+
+     The OpenSSL RSA Key generation algorithm has been shown to be vulnerable to
+     a cache timing side channel attack. An attacker with sufficient access to
+     mount cache timing attacks during the RSA key generation process could
+     recover the private key.
+
+     This issue was reported to OpenSSL on 4th April 2018 by Alejandro Cabrera
+     Aldaya, Billy Brumley, Cesar Pereida Garcia and Luis Manuel Alvarez Tapia.
+     (CVE-2018-0737)
+     [Billy Brumley]
+
+  *) Make EVP_PKEY_asn1_new() a bit stricter about its input.  A NULL pem_str
+     parameter is no longer accepted, as it leads to a corrupt table.  NULL
+     pem_str is reserved for alias entries only.
+     [Richard Levitte]
+
+  *) Revert blinding in ECDSA sign and instead make problematic addition
+     length-invariant. Switch even to fixed-length Montgomery multiplication.
+     [Andy Polyakov]
+
+  *) Change generating and checking of primes so that the error rate of not
+     being prime depends on the intended use based on the size of the input.
+     For larger primes this will result in more rounds of Miller-Rabin.
+     The maximal error rate for primes with more than 1080 bits is lowered
+     to 2^-128.
+     [Kurt Roeckx, Annie Yousar]
+
+  *) Increase the number of Miller-Rabin rounds for DSA key generating to 64.
+     [Kurt Roeckx]
+
+  *) Add blinding to ECDSA and DSA signatures to protect against side channel
+     attacks discovered by Keegan Ryan (NCC Group).
+     [Matt Caswell]
+
+  *) When unlocking a pass phrase protected PEM file or PKCS#8 container, we
+     now allow empty (zero character) pass phrases.
+     [Richard Levitte]
+
+  *) Certificate time validation (X509_cmp_time) enforces stricter
+     compliance with RFC 5280. Fractional seconds and timezone offsets
+     are no longer allowed.
+     [Emilia Käsper]
+
  Changes between 1.0.2n and 1.0.2o [27 Mar 2018]
 
   *) Constructed ASN.1 types with a recursive definition could exceed the stack

deps/openssl/openssl/CONTRIBUTING

@@ -1,26 +1,26 @@
-HOW TO CONTRIBUTE PATCHES TO OpenSSL
-------------------------------------
+HOW TO CONTRIBUTE TO OpenSSL
+----------------------------
 
 (Please visit https://www.openssl.org/community/getting-started.html for
 other ideas about how to contribute.)
 
-Development is coordinated on the openssl-dev mailing list (see the
-above link or https://mta.openssl.org for information on subscribing).
-If you are unsure as to whether a feature will be useful for the general
-OpenSSL community you might want to discuss it on the openssl-dev mailing
-list first.  Someone may be already working on the same thing or there
-may be a good reason as to why that feature isn't implemented.
+Development is done on GitHub, https://github.com/openssl/openssl.
 
-To submit a patch, make a pull request on GitHub.  If you think the patch
-could use feedback from the community, please start a thread on openssl-dev
-to discuss it.
+To request new features or report bugs, please open an issue on GitHub
 
-Having addressed the following items before the PR will help make the
-acceptance and review process faster:
+To submit a patch, please open a pull request on GitHub.  If you are thinking
+of making a large contribution, open an issue for it before starting work,
+to get comments from the community.  Someone may be already working on
+the same thing or there may be reasons why that feature isn't implemented.
 
-    1. Anything other than trivial contributions will require a contributor
-    licensing agreement, giving us permission to use your code. See
-    https://www.openssl.org/policies/cla.html for details.
+To make it easier to review and accept your pull request, please follow these
+guidelines:
+
+    1. Anything other than a trivial contribution requires a Contributor
+    License Agreement (CLA), giving us permission to use your code. See
+    https://www.openssl.org/policies/cla.html for details.  If your
+    contribution is too small to require a CLA, put "CLA: trivial" on a
+    line by itself in your commit message body.
 
     2.  All source files should start with the following text (with
     appropriate comment characters at the start of each line and the
@@ -34,21 +34,21 @@ acceptance and review process faster:
         https://www.openssl.org/source/license.html
 
     3.  Patches should be as current as possible; expect to have to rebase
-    often. We do not accept merge commits; You will be asked to remove
-    them before a patch is considered acceptable.
+    often. We do not accept merge commits, you will have to remove them
+    (usually by rebasing) before it will be acceptable.
 
     4.  Patches should follow our coding style (see
-    https://www.openssl.org/policies/codingstyle.html) and compile without
-    warnings. Where gcc or clang is availble you should use the
+    https://www.openssl.org/policies/codingstyle.html) and compile
+    without warnings. Where gcc or clang is available you should use the
     --strict-warnings Configure option.  OpenSSL compiles on many varied
-    platforms: try to ensure you only use portable features.
-    Clean builds via Travis and AppVeyor are expected, and done whenever
-    a PR is created or updated.
+    platforms: try to ensure you only use portable features.  Clean builds
+    via Travis and AppVeyor are required, and they are started automatically
+    whenever a PR is created or updated.
 
     5.  When at all possible, patches should include tests. These can
     either be added to an existing test, or completely new.  Please see
     test/README for information on the test framework.
 
     6.  New features or changed functionality must include
-    documentation. Please look at the "pod" files in doc/apps, doc/crypto
-    and doc/ssl for examples of our style.
+    documentation. Please look at the "pod" files in doc for
+    examples of our style.

deps/openssl/openssl/Configure

@@ -1173,6 +1173,7 @@ foreach (sort (keys %disabled))
 				$depflags .= " -DOPENSSL_NO_$ALGO";
 				}
 			}
+                        if (/^comp$/)	{ $zlib = 0; }
 		}
 
 	print "\n";
@@ -1671,6 +1672,13 @@ while (<PIPE>) {
 }
 close(PIPE);
 
+# Xcode did not handle $cc -M before clang support
+my $cc_as_makedepend = 0;
+if ($predefined{__GNUC__} >= 3 && !(defined($predefined{__APPLE_CC__})
+                                    && !defined($predefined{__clang__}))) {
+  $cc_as_makedepend = 1;
+}
+
 if ($strict_warnings)
 	{
 	my $wopt;
@@ -1730,14 +1738,14 @@ while (<IN>)
 		s/^NM=\s*/NM= \$\(CROSS_COMPILE\)/;
 		s/^RANLIB=\s*/RANLIB= \$\(CROSS_COMPILE\)/;
 		s/^RC=\s*/RC= \$\(CROSS_COMPILE\)/;
-		s/^MAKEDEPPROG=.*$/MAKEDEPPROG= \$\(CROSS_COMPILE\)$cc/ if $predefined{__GNUC__} >= 3;
+		s/^MAKEDEPPROG=.*$/MAKEDEPPROG= \$\(CROSS_COMPILE\)$cc/ if $cc_as_makedepend;
 		}
 	else	{
 		s/^CC=.*$/CC= $cc/;
 		s/^AR=\s*ar/AR= $ar/;
 		s/^RANLIB=.*/RANLIB= $ranlib/;
 		s/^RC=.*/RC= $windres/;
-		s/^MAKEDEPPROG=.*$/MAKEDEPPROG= $cc/ if $predefined{__GNUC__} >= 3;
+		s/^MAKEDEPPROG=.*$/MAKEDEPPROG= $cc/ if $cc_as_makedepend;
 		}
 	s/^CFLAG=.*$/CFLAG= $cflags/;
 	s/^DEPFLAG=.*$/DEPFLAG=$depflags/;

deps/openssl/openssl/Makefile

@@ -4,7 +4,7 @@
 ## Makefile for OpenSSL
 ##
 
-VERSION=1.0.2o
+VERSION=1.0.2p
 MAJOR=1
 MINOR=0.2
 SHLIB_VERSION_NUMBER=1.0.0

deps/openssl/openssl/Makefile.bak

@@ -4,7 +4,7 @@
 ## Makefile for OpenSSL
 ##
 
-VERSION=1.0.2o
+VERSION=1.0.2p
 MAJOR=1
 MINOR=0.2
 SHLIB_VERSION_NUMBER=1.0.0

deps/openssl/openssl/NEWS

@@ -5,6 +5,11 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
+  Major changes between OpenSSL 1.0.2o and OpenSSL 1.0.2p [14 Aug 2018]
+
+      o Client DoS due to large DH parameter (CVE-2018-0732)
+      o Cache timing vulnerability in RSA Key Generation (CVE-2018-0737)
+
   Major changes between OpenSSL 1.0.2n and OpenSSL 1.0.2o [27 Mar 2018]
 
       o Constructed ASN.1 types with a recursive definition could exceed the

deps/openssl/openssl/README

@@ -1,7 +1,7 @@
 
- OpenSSL 1.0.2o 27 Mar 2018
+ OpenSSL 1.0.2p 14 Aug 2018
 
- Copyright (c) 1998-2015 The OpenSSL Project
+ Copyright (c) 1998-2018 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 

deps/openssl/openssl/apps/app_rand.c

@@ -124,16 +124,7 @@ int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn)
     char buffer[200];
 
 #ifdef OPENSSL_SYS_WINDOWS
-    /*
-     * allocate 2 to dont_warn not to use RAND_screen() via
-     * -no_rand_screen option in s_client
-     */
-    if (dont_warn != 2) {
-      BIO_printf(bio_e, "Loading 'screen' into random state -");
-      BIO_flush(bio_e);
-      RAND_screen();
-      BIO_printf(bio_e, " done\n");
-    }
+    RAND_screen();
 #endif
 
     if (file == NULL)

deps/openssl/openssl/apps/apps.c

@@ -56,7 +56,7 @@
  * [including the GNU Public Licence.]
  */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2018 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -1359,7 +1359,8 @@ int set_name_ex(unsigned long *flags, const char *arg)
     };
     if (set_multi_opts(flags, arg, ex_tbl) == 0)
         return 0;
-    if ((*flags & XN_FLAG_SEP_MASK) == 0)
+    if (*flags != XN_FLAG_COMPAT
+        && (*flags & XN_FLAG_SEP_MASK) == 0)
         *flags |= XN_FLAG_SEP_CPLUS_SPC;
     return 1;
 }

deps/openssl/openssl/apps/asn1pars.c

@@ -295,7 +295,7 @@ int MAIN(int argc, char **argv)
             ASN1_TYPE *atmp;
             int typ;
             j = atoi(sk_OPENSSL_STRING_value(osk, i));
-            if (j == 0) {
+            if (j <= 0 || j >= tmplen) {
                 BIO_printf(bio_err, "'%s' is an invalid number\n",
                            sk_OPENSSL_STRING_value(osk, i));
                 continue;
@@ -327,14 +327,14 @@ int MAIN(int argc, char **argv)
         num = tmplen;
     }
 
-    if (offset >= num) {
-        BIO_printf(bio_err, "Error: offset too large\n");
+    if (offset < 0 || offset >= num) {
+        BIO_printf(bio_err, "Error: offset out of range\n");
         goto end;
     }
 
     num -= offset;
 
-    if ((length == 0) || ((long)length > num))
+    if (length == 0 || length > (unsigned int)num)
         length = (unsigned int)num;
     if (derout) {
         if (BIO_write(derout, str + offset, length) != (int)length) {

deps/openssl/openssl/apps/ca.c

@@ -1176,10 +1176,13 @@ int MAIN(int argc, char **argv)
             if (j > 0) {
                 total_done++;
                 BIO_printf(bio_err, "\n");
-                if (!BN_add_word(serial, 1))
+                if (!BN_add_word(serial, 1)) {
+                    X509_free(x);
                     goto err;
+                }
                 if (!sk_X509_push(cert_sk, x)) {
                     BIO_printf(bio_err, "Memory allocation failure\n");
+                    X509_free(x);
                     goto err;
                 }
             }

deps/openssl/openssl/apps/ocsp.c

@@ -4,7 +4,7 @@
  * 2000.
  */
 /* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999-2018 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -787,7 +787,6 @@ int MAIN(int argc, char **argv)
                    OCSP_response_status_str(i), i);
         if (ignore_err)
             goto redo_accept;
-        ret = 0;
         goto end;
     }
 

deps/openssl/openssl/apps/passwd.c

@@ -306,9 +306,9 @@ static char *md5crypt(const char *passwd, const char *magic, const char *salt)
     out_buf[0] = '$';
     out_buf[1] = 0;
     assert(strlen(magic) <= 4); /* "1" or "apr1" */
-    strncat(out_buf, magic, 4);
-    strncat(out_buf, "$", 1);
-    strncat(out_buf, salt, 8);
+    BUF_strlcat(out_buf, magic, sizeof(out_buf));
+    BUF_strlcat(out_buf, "$", sizeof(out_buf));
+    BUF_strlcat(out_buf, salt, sizeof(out_buf));
     assert(strlen(out_buf) <= 6 + 8); /* "$apr1$..salt.." */
     salt_out = out_buf + 2 + strlen(magic);
     salt_len = strlen(salt_out);

deps/openssl/openssl/apps/s_apps.h

@@ -56,7 +56,7 @@
  * [including the GNU Public Licence.]
  */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2018 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -152,9 +152,8 @@ typedef fd_mask fd_set;
 #define PROTOCOL        "tcp"
 
 int do_server(int port, int type, int *ret,
-              int (*cb) (char *hostname, int s, int stype,
-                         unsigned char *context), unsigned char *context,
-              int naccept);
+              int (*cb) (int s, int stype, unsigned char *context),
+              unsigned char *context, int naccept);
 #ifdef HEADER_X509_H
 int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx);
 #endif