pylintrc

[MASTER]

# Specify a configuration file.
#rcfile=

# Python code to execute, usually for sys.path manipulation such as
# pygtk.require().
#init-hook=

# Profiled execution.
profile=no

# Add files or directories to the blacklist. They should be base names, not
# paths.
ignore=CVS

# Pickle collected data for later comparisons.
persistent=yes

# List of plugins (as comma separated values of python modules names) to load,
# usually to register additional checkers.
load-plugins=
#pylint.extensions.docparams


[MESSAGES CONTROL]

# Enable the message, report, category or checker with the given id(s). You can
# either give multiple identifier separated by comma (,) or put this option
# multiple time. See also the "--disable" option for examples.
#enable=

# Disable the message, report, category or checker with the given id(s). You
# can either give multiple identifiers separated by comma (,) or put this
# option multiple times (only on the command line, not in the configuration
# file where it should appear only once).You can also use "--disable=all" to
# disable everything first and then reenable specific checks. For example, if
# you want to run only the similarities checker, you can use "--disable=all
# --enable=similarities". If you want to run only the classes checker, but have
# no Warning level messages displayed, use"--disable=all --enable=classes
# --disable=W"
#
# Disabled warnings (remove from this list when enabled):
# W0101: Unreachable code
# W0104: Statement seems to have no effect
# W0105: String statement has no effect
# W0106: Expression "%s" is assigned to nothing
# W0107: Unnecessary pass statement
# W0108: Lambda may not be necessary
# W0109: Duplicate key %r in dictionary
# W0110: map/filter on lambda could be replaced by comprehension
# W0120: Else clause on loop without a break statement
# W0121: Use raise ErrorClass(args) instead of raise ErrorClass, args.
# W0122: Use of the exec statement
# W0141: Used builtin function %r
# W0142: Used * or ** magic
# W0150: %s statement in finally block may swallow exception
# W0199: Assert called on a 2-uple. Did you mean \'assert x,y\'?
# W0201: Attribute %r defined outside __init__
# W0211: Static method with %r as first argument
# W0212: Access to a protected member %s of a client class
# W0221: Arguments number differs from %s method
# W0222: Signature differs from %s method
# W0223: Method %r is abstract in class %r but is not overridden
# W0231: __init__ method from base class %r is not called
# W0232: Class has no __init__ method
# W0233: __init__ method from a non direct base class %r is called
# W0234: iter returns non-iterator
# W0301: Unnecessary semicolon
# W0331: Use of the <> operator
# W0332: Use l as long integer identifier
# W0333: Use of the `` operator
# W0401: Wildcard import %s
# W0402: Uses of a deprecated module %r
# W0403: Relative import %r
# W0404: Reimport %r (imported line %s)
# W0406: Module import itself
# W0410: __future__ import is not the first non docstring statement
# W0511 (warning notes in code comments)
# W0512: Cannot decode using encoding "%s", unexpected byte at position %d
# W0601: Global variable %r undefined at the module level
# W0602: Using global for %r but no assigment is done
# W0603: Using the global statement
# W0604: Using the global statement at the module level
# W0611: Unused import %s
# W0612: Unused variable %r
# W0613: Unused argument %r
# W0614: Unused import %s from wildcard import
# W0621: Redefining name %r from outer scope (line %s)
# W0622: Redefining built-in %r
# W0623: Redefining name %r from %s in exception handler
# W0631: Using possibly undefined loop variable %r
# W0632: Possible unbalanced tuple unpacking with sequence%s:
# W0633: Attempting to unpack a non-sequence%s
# W0701: Raising a string exception
# W0702: No exception type(s) specified
# W0703: Catch "Exception"
# W0704: Except doesn't do anything
# W0710: Exception doesn't inherit from standard "Exception" class
# W0711: Exception to catch is the result of a binary "%s" operation
# W0712: Implicit unpacking of exceptions is not supported in Python 3
# W1001: Use of "property" on an old style class
# W1111: Assigning to function call which only returns None
# W1201: Specify string format arguments as logging function parameters
# W1300: Format string dictionary key should be a string, not %s
# W1301: Unused key %r in format string dictionary
# W1401: Anomalous backslash in string: \'%s\'. String constant might be missing an r prefix.
# W1402: Anomalous Unicode escape in byte string: \'%s\'. String constant might be missing an r or u prefix.
# W1501: "%s" is not a valid mode for open.

disable=C, R,W0101,W0104,W0105,W0106,W0107,W0108,W0109, W0110, W0120, W0121, W0122, W0141, W0142, W0150, W0199, W0201, W0211, W0212, W0221, W0222, W0223, W0231, W0232, W0233, W0234, W0301, W0331, W0332, W0333, W0401, W0402, W0403, W0404, W0406, W0410, W0511, W0512, W0601, W0602, W0603, W0604, W0611, W0612, W0613, W0614, W0621, W0622, W0623, W0631, W0632, W0633, W0701, W0702, W0703, W0704, W0710, W0711, W0712, W1001, W1111, W1201, W1300, W1301, W1401, W1402, W1501


[REPORTS]

# Set the output format. Available formats are text, parseable, colorized, msvs
# (visual studio) and html. You can also give a reporter class, eg
# mypackage.mymodule.MyReporterClass.
# output-format=parseable
msg-template={path}:{line}: [{msg_id}({symbol}), {obj}] {msg}

# Include message's id in output
include-ids=no

# Include symbolic ids of messages in output
symbols=no

# Put messages in a separate file for each module / package specified on the
# command line instead of printing them on stdout. Reports (if any) will be
# written in a file name "pylint_global.[txt|html]".
files-output=no

# Tells whether to display a full report or only the messages
reports=no

# Python expression which should return a note less than 10 (10 is the highest
# note). You have access to the variables errors warning, statement which
# respectively contain the number of errors / warnings messages and the total
# number of statements analyzed. This is used by the global evaluation report
# (RP0004).
evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)

# Add a comment according to your evaluation note. This is used by the global
# evaluation report (RP0004).
comment=no


[BASIC]

# Required attributes for module, separated by a comma
required-attributes=

# List of builtins function names that should not be used, separated by a comma
bad-functions=apply,input

# Regular expression which should only match correct module names
module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$

# Regular expression which should only match correct module level names
const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$

# Regular expression which should only match correct class names
class-rgx=[A-Z_][a-zA-Z0-9]+$

# Regular expression which should only match correct function names
function-rgx=[a-z_][a-z0-9_]{2,30}$

# Regular expression which should only match correct method names
method-rgx=[a-z_][a-z0-9_]{2,30}$

# Regular expression which should only match correct instance attribute names
attr-rgx=[a-z_][a-z0-9_]{2,30}$

# Regular expression which should only match correct argument names
argument-rgx=[a-z_][a-z0-9_]{2,30}$

# Regular expression which should only match correct variable names
variable-rgx=[a-z_][a-z0-9_]{2,30}$

# Regular expression which should only match correct list comprehension /
# generator expression variable names
inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$

# Good variable names which should always be accepted, separated by a comma
good-names=i,j,k,ex,Run,_

# Bad variable names which should always be refused, separated by a comma
bad-names=foo,bar,baz,toto,tutu,tata

# Regular expression which should only match functions or classes name which do
# not require a docstring
no-docstring-rgx=__.*__


[FORMAT]

# Maximum number of characters on a single line.
max-line-length=80

# Maximum number of lines in a module
max-module-lines=1000

# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
# tab).
indent-string='    '


[MISCELLANEOUS]

# List of note tags to take in consideration, separated by a comma.
notes=FIXME,XXX,TODO


[SIMILARITIES]

# Minimum lines number of a similarity.
min-similarity-lines=4

# Ignore comments when computing similarities.
ignore-comments=yes

# Ignore docstrings when computing similarities.
ignore-docstrings=yes

# Ignore imports when computing similarities.
ignore-imports=no


[TYPECHECK]

# Tells whether missing members accessed in mixin class should be ignored. A
# mixin class is detected if its name ends with "mixin" (case insensitive).
ignore-mixin-members=yes

# List of classes names for which member attributes should not be checked
# (useful for classes with attributes dynamically set).
ignored-classes=SQLObject,LookupDict,pytest

# When zope mode is activated, add a predefined set of Zope acquired attributes
# to generated-members.
zope=no

# List of members which are set dynamically and missed by pylint inference
# system, and so shouldn't trigger E0201 when accessed. Python regular
# expressions are accepted.
generated-members=REQUEST,acl_users,aq_parent


[VARIABLES]

# Tells whether we should check for unused import in __init__ files.
init-import=no

# A regular expression matching the beginning of the name of dummy variables
# (i.e. not used).
dummy-variables-rgx=_|dummy

# List of additional names supposed to be defined in builtins. Remember that
# you should avoid to define new builtins when possible.
additional-builtins=


[CLASSES]

# List of interface methods to ignore, separated by a comma. This is used for
# instance to not check methods defines in Zope's Interface base class.
ignore-iface-methods=isImplementedBy,deferred,extends,names,namesAndDescriptions,queryDescriptionFor,getBases,getDescriptionFor,getDoc,getName,getTaggedValue,getTaggedValueTags,isEqualOrExtendedBy,setTaggedValue,isImplementedByInstancesOf,adaptWith,is_implemented_by

# List of method names used to declare (i.e. assign) instance attributes.
defining-attr-methods=__init__,__new__,setUp

# List of valid names for the first argument in a class method.
valid-classmethod-first-arg=cls

# List of valid names for the first argument in a metaclass class method.
valid-metaclass-classmethod-first-arg=mcs


[DESIGN]

# Maximum number of arguments for function / method
max-args=5

# Argument names that match this expression will be ignored. Default to name
# with leading underscore
ignored-argument-names=_.*

# Maximum number of locals for function / method body
max-locals=15

# Maximum number of return / yield for function / method body
max-returns=6

# Maximum number of branch for function / method body
max-branchs=12

# Maximum number of statements in function / method body
max-statements=50

# Maximum number of parents for a class (see R0901).
max-parents=7

# Maximum number of attributes for a class (see R0902).
max-attributes=7

# Minimum number of public methods for a class (see R0903).
min-public-methods=2

# Maximum number of public methods for a class (see R0904).
max-public-methods=20


[IMPORTS]

# Deprecated modules which should not be used, separated by a comma
deprecated-modules=regsub,string,TERMIOS,Bastion,rexec

# Create a graph of every (i.e. internal and external) dependencies in the
# given file (report RP0402 must not be disabled)
import-graph=

# Create a graph of external dependencies in the given file (report RP0402 must
# not be disabled)
ext-import-graph=

# Create a graph of internal dependencies in the given file (report RP0402 must
# not be disabled)
int-import-graph=


[EXCEPTIONS]

# Exceptions that will emit a warning when being caught. Defaults to
# "Exception"
overgeneral-exceptions=Exception