The host.* namespace SHOULD be exclusively used to capture resource attributes.
To report host metrics, the system.* namespace SHOULD be used.
Status:
type: host
Description: A host is defined as a computing instance. For example, physical servers, virtual machines, switches or disk array.
| Attribute | Type | Description | Examples | Requirement Level | Stability |
|---|---|---|---|---|---|
host.arch |
string | The CPU architecture the host system is running on. | amd64; arm32; arm64 |
Recommended |
 |
host.id |
string | Unique host ID. For Cloud, this must be the instance_id assigned by the cloud provider. For non-containerized systems, this should be the machine-id. See the table below for the sources to use to determine the machine-id based on operating system. [1] |
fdbf79e8af94cb7f9e8df36789187052 |
Recommended |
|
host.image.id |
string | VM image ID or host OS image ID. For Cloud, this value is from the provider. | ami-07b06b442921831e5 |
Recommended |
|
host.image.name |
string | Name of the VM image or OS install the host was instantiated from. | infra-ami-eks-worker-node-7d4ec78312; CentOS-8-x86_64-1905 |
Recommended |
|
host.image.version |
string | The version string of the VM image or host OS as defined in Version Attributes. | 0.1 |
Recommended |
|
host.name |
string | Name of the host. On Unix systems, it may contain what the hostname command returns, or the fully qualified hostname, or another name specified by the user. | opentelemetry-test |
Recommended |
|
host.type |
string | Type of host. For Cloud, this must be the machine type. | n1-standard-1 |
Recommended |
|
host.ip |
string[] | Available IP addresses of the host, excluding loopback interfaces. [2] | ["192.168.1.140", "fe80::abc2:4a28:737a:609e"] |
Opt-In |
|
host.mac |
string[] | Available MAC addresses of the host, excluding loopback interfaces. [3] | ["AC-DE-48-23-45-67", "AC-DE-48-23-45-67-01-9F"] |
Opt-In |
|
[1]: Collecting host.id from non-containerized systems
Non-privileged Machine ID Lookup
When collecting host.id for non-containerized systems non-privileged lookups
of the machine id are preferred. SDK detector implementations MUST use the
sources listed below to obtain the machine id.
| OS | Primary | Fallback |
|---|---|---|
| Linux | contents of /etc/machine-id |
contents of /var/lib/dbus/machine-id |
| BSD | contents of /etc/hostid |
output of kenv -q smbios.system.uuid |
| MacOS | IOPlatformUUID line from the output of ioreg -rd1 -c "IOPlatformExpertDevice" |
- |
| Windows | MachineGuid from registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography |
- |
Privileged Machine ID Lookup
The host.id can be looked up using privileged sources. For example, Linux
systems can use the output of dmidecode -t system, dmidecode -t baseboard,
dmidecode -t chassis, or read the corresponding data from the filesystem
(e.g. cat /sys/devices/virtual/dmi/id/product_id,
cat /sys/devices/virtual/dmi/id/product_uuid, etc), however, SDK resource
detector implementations MUST not collect host.id from privileged sources. If
privileged lookup of host.id is required, the value should be injected via the
OTEL_RESOURCE_ATTRIBUTES environment variable.
[2]: IPv4 Addresses MUST be specified in dotted-quad notation. IPv6 addresses MUST be specified in the RFC 5952 format.
[3]: MAC Addresses MUST be represented in IEEE RA hexadecimal form: as hyphen-separated octets in uppercase hexadecimal form from most to least significant.
host.arch has the following list of well-known values. If one of them applies, then the respective value MUST be used; otherwise, a custom value MAY be used.
| Value | Description | Stability |
|---|---|---|
amd64 |
AMD64 | |
arm32 |
ARM32 | |
arm64 |
ARM64 | |
ia64 |
Itanium | |
ppc32 |
32-bit PowerPC | |
ppc64 |
64-bit PowerPC | |
s390x |
IBM z/Architecture | |
x86 |
32-bit x86 | |
type: host.cpu
Status:
type: host.cpu
Description: A host's CPU information
| Attribute | Type | Description | Examples | Requirement Level | Stability |
|---|---|---|---|---|---|
host.cpu.cache.l2.size |
int | The amount of level 2 memory cache available to the processor (in Bytes). | 12288000 |
Opt-In |
|
host.cpu.family |
string | Family or generation of the CPU. | 6; PA-RISC 1.1e |
Opt-In |
|
host.cpu.model.id |
string | Model identifier. It provides more granular information about the CPU, distinguishing it from other CPUs within the same family. | 6; 9000/778/B180L |
Opt-In |
|
host.cpu.model.name |
string | Model designation of the processor. | 11th Gen Intel(R) Core(TM) i7-1185G7 @ 3.00GHz |
Opt-In |
|
host.cpu.stepping |
string | Stepping or core revisions. | 1; r1p1 |
Opt-In |
|
host.cpu.vendor.id |
string | Processor manufacturer identifier. A maximum 12-character string. [1] | GenuineIntel |
Opt-In |
|
[1]: CPUID command returns the vendor ID string in EBX, EDX and ECX registers. Writing these to memory in this order results in a 12-character string.