Skip to content

Latest commit

 

History

History
34 lines (26 loc) · 1008 Bytes

readme.md

File metadata and controls

34 lines (26 loc) · 1008 Bytes
Raw

Keymaps

This repo contains my QMK keymaps. It uses the "External Userspace" feature, which overlays this repo contents when building.

For maintainability, I've pinned a tag of the base repository here as a submodule, so that upgrades are not a suprise.

Setup dependencies

  1. brew install just qmk/qmk/qmk
  2. just setup

Build

  1. just build primekb/prime_e/rgb

Installing firmware

Basic

just flash primekb/prime_e/rgb, then hit reset button, or pre-programmed reset key

Ca66

Plug in ca66 while holding ESC, then run bootloadHID hex/playkbtw_ca66_me.hex Then plug in again

Teensy

use teensy loader while in bootloader mode (either with soft reset or button on teensy)

Pro micros

flashProMicro hex/work_macropad.hex <num> run first command twice to find the tty that is added after shorting the pins

ls /dev/tty* | grep usbmodem
avrdude -p atmega32u4 -P /dev/tty.usbmodem1411  -c avr109  -U flash:w:gherkin_ePipes.hex

If that doesn't work, try grepping for ACM0