Cura_Start_End.txt

; CURA START GCODE

START_PRINT ; Cura
; G28 ; Cura Home
; M420 S1 ; Cura Enable ABL using saved Mesh and Fade Height
CLEAR_PAUSE ; Cura
G90  ; Cura
G92 E0 ; Cura Reset Extruder
M190 S{material_bed_temperature} ; Cura wait bed temperature and continue on
M109 S{material_print_temperature}; Cura wait extruder temperature and continue on
G1 Z0.3 F3000 ; Cura Move bed down
G1 X10 Y13 Z0.2 F15000.0 ; Cura Move to start position
G1 X150 Y13 Z0.2 F1500.0 E10 ;Draw the first line
;G1 X10 Y150 Z0.2 F5000.0 ;Move to side a little
; G1 X7 Y155 Z0.025 F2000.0 ;Draw the second line
G92 E0 ;Reset Extruder
G1 Z0.3 F3000 E-2 ;Move Bed up
G92 E0 ;Reset Extruder
LAST_START_PRINT ; macro purge


; CURA END GCODE

; M83 ; Cura
G90 X150 Y-10
G91 ; Relative positioning  ; Cura
G10 ; Cura Retract - Firmware Retraction
G1 E-2 F2700 ;Retract a bit ; Cura
G1 E-30 Z3 F2400 ;Retract 3cm and raise Z ; Cura
DISABLE_EXTRUDER ; Cura
G1 Z10 ;Raise Z more ; Cura
G90 ;Absolute positioning ; Cura
; G1 X150 Y150 F3000 ; Cura go to center and cool
; end_tune  ; Cura Beeper
clear_last_file ;Cura macro
M106 S100 ; Cura fan
TURN_OFF_HEATERS  ; Cura
TIMELAPSE_RENDER  ; Cura
M18 ;Klipper disables ALL Motors  ; Cura
M84 ;Klipper disables ALL Motors  ; Cura
G4 P10000  ; Cura
M107 ;Turn-off fan  ; Cura
;G1 X0 Y{machine_depth} ;Cura Present print
G90  ; Cura
END_PRINT  ; Cura