Skip to content

Latest commit

 

History

History
103 lines (72 loc) · 4.51 KB

README.md

File metadata and controls

103 lines (72 loc) · 4.51 KB

3d printed box for the photobooth-app

Download your 3d print files to build a photobooth integrating Raspberry Pi cameras or DSLR. This repo holds solidworks cad data and files to print the case as well as a basic list of materials to build the booth.

The booth is driven by the photobooth-app.

photobooth 3d printed

😍 Features

  • compact design
  • DSLR and picamera variants
  • led ring signaling countdown and when the photo is actually taken
  • 7" or 10" touchscreens supported

Variants

Variant in depth

There are two different depth variants:

  • higher depth for DSLR
  • lower depth for Pi camera setups.

Variant in width

There are two different width variants:

  • wide that allows for 10" screens
  • narrow that allows for 7" screens only

Download model as is

The recommended variants are provided as STEP file for direct 3d printing. STEP files can be imported in the Slicer and split into single objects before printing.

Camera Width Depth Screen STEP file
Pi Camera narrow short 7inch DSI LCD (C) booth-100-000_narrow-picam-7inch.STEP
wide short 10.1DP-CAPLCD booth-100-000_wide-picam-10inch.STEP
DSLR narrow deep 7inch DSI LCD (C) booth-100-000_narrow-dslr-7inch.STEP
wide deep 10.1DP-CAPLCD booth-100-000_wide-dslr-10inch.STEP

If you want to modify the model, download the solidworks files.

🔧 Material (BOM)

Above are the parts that are hard required by the mechanical design. Of course you need to add your Raspberry Pi or alternative computer and the camera depending on your setup.

📷 CAD images of the box

3d printed photobooth box 10inch variant with dslr front view 3d printed 10inch variant rear view 3d printed photobooth box 7inch variant with pi camera front view 3d printed 7inch variant with pi camera rear view 3d printed photobooth box rear view closed

⚙️ Prerequisites

  • 3d printer
  • Material listed above and additional electronics specific to your setup (Raspberry Pi, ...)
  • Solidworks maker if modifications desired
  • works best with the photobooth-app

🔍 Changelog

  • v2 release 2024-09-13
    • reworked solidworks model
    • reinforced lower side in frame part
    • split front and side frame so it can be printed in different colors easily.
  • rc2 facelift 2024-09-05
    • overall size changed, not compatible with former version.
    • backplate including cooling
    • simplified design
    • prepared for quality touchscreens from waveshare to enhance reliability
  • rc1 (2022-10-03)
    • introduced led ring
    • improved assembly and strength
    • camera mount improved and allows for alignment while assembling
  • prototype
    • first version for testing and design improvements

©️ License

The design is licensed under the MIT license.

🎉 Donation

If you like my work and like to keep me motivated you can sponsor me:

Donate