Column Setter is a Sass tool that lets you easily set up a custom responsive grid for your website and build a float- or flexbox-based layout that aligns to it. It uses one simple function and a small handful of optional mixins to generate CSS widths based on your settings. And for the most part, it leaves the structure of your HTML and CSS entirely up to you.
- Unit values are now supported in the grid property variables (
$mar,$col,$gut,$pad) in_column-settings.scss. - All grid properties can now be customized per breakpoint in the
$breakpointsmap in_column-settings.scss. colspan()can now natively generate negative width values (-) and add a gutter to width values (+g).- A wider range of errors now can be detected, including missing or incorrectly formatted settings.
Begin by saving _column-settings.scss and _column-setter.scss in the same directory as your main Sass file.
In _column-settings.scss, customize your grid’s proportions by editing the values of the four variables at the top of the file ($mar, $col, $gut, $pad). These establish the spatial relationship between the grid’s properties. For an entirely fluid grid, use all unitless numbers (e.g. “$mar: 4; $col: 3;”). These will cause colspan(), Column Setter’s central function, to generate % values. Otherwise, units are allowed (e.g. “$gut: 1em;”), as is a mix of unitless and units (e.g. “$col: 3; $gut: 1em;”). Mixed units will cause colspan() to generate calc() values. When using units, keep these caveats in mind:
- Giving
$cola unit value is allowed but not recommended. - If
$marand$gutboth have unit values, giving$colany unitless value will make columns fill the available space, as if they were1frin CSS Grid. Likewise, if$marand$colboth have unit values, giving$gutany unitless value will make gutters fill the available space. - Making
$maror$padunitless will have no effect unless$coland/or$gutare also unitless.
However you decide to define their values, don’t delete any of these variables. For any you don’t need to use, just assign a value of 0. The Column Setter demo (demo.html) creates a completely fluid grid by using all unitless values:
$mar: 4; // Margin width
$col: 4; // Column width
$gut: 2; // Gutter width
$pad: 1; // Padding widthOnce you’ve chosen values for the grid proportions, customize the layout’s breakpoints by editing the $breakpoints map. You can define as many (or as few) breakpoints as you like, and name them whatever you want. Just be sure to:
- use the syntax shown below
- keep the breakpoints in order (smallest to largest)
- include a name (e.g.
xl), number of columns (cols, unitless) and minimum width (min-width, with units, such asemorpx) for each breakpoint
Any or all of the grid’s proportions can optionally be customized per breakpoint, using the keys margin, column, gutter, and padding. Breakpoints without those customizations will use the same proportions specified in the variables above. Here’s a sample $breakpoints map with five breakpoints:
$breakpoints: (
xs: ( cols: 4, min-width: 0, padding: 2em ), // Includes optional custom padding
sm: ( cols: 6, min-width: 30em, margin: 5 ), // Includes optional custom margin
md: ( cols: 8, min-width: 40em ),
lg: ( cols: 12, min-width: 50em ),
xl: ( cols: 16, min-width: 60em )
);Once your settings are in place, import _column-settings.scss and _column-setter.scss (in that order) into your main Sass file:
@import "_column-settings.scss";
@import "_column-setter.scss";To get the most out of Column Setter, using it in conjunction with * { box-sizing: border-box; } is strongly recommended. Column Setter is lean and mean, packing a lot of power into just one function and five optional mixins.
colspan() is a function used to generate width values that align with the grid. To use it on an element, you’ll need to know how many columns wide the element’s container is. For example, to specify a width of six columns for an element inside a container that’s 12 columns wide:
.example {
width: colspan( 6, 12 ); // 6 columns wide out of 12
}Depending on your grid settings, the above code might compile to something like this:
.example {
width: 48.82033%;
}Or something like this:
.example {
width: calc((((100% - 11em) / 12) * 6) + 5em);
}colspan() will also take the arguments p (padding) and g (gutter):
img.inset {
float: left;
width: colspan( 2, 8 );
padding: colspan( p, 8 );
margin-right: colspan( g, 8 );
margin-bottom: colspan( g, 8 );
}A gutter width can optionally be added by including +g:
.example {
margin-left: colspan( 6+g, 12 ); // 6 columns wide out of 12, plus an extra gutter
}Widths can also be made negative (useful for negative margins) by including -:
.example {
margin-left: colspan( -6+g, 12 );
}grid() is a mixin used to establish the context for your grid. It sets the vertical margins for your layout at all breakpoints. The first (and only required) argument it takes is the class name of the layout’s container. If, for example, your layout is wrapped in a div with a class of main-content, you’ll invoke grid() like so:
@include grid( main-content );This establishes the container’s horizontal margins for each of the breakpoints you specified in _column-settings.scss, and it compiles to something like this:
@media screen and (min-width: 0) {
.content {
margin: 0 3.38638%;
}
}
@media screen and (min-width: 30em) {
.content {
margin: 0 4.36194%;
}
}You can also optionally include overlay as a second argument, which will put a translucent overlay of the grid on top of your layout so you can make sure everything is lining up correctly:
@include grid( main-content, overlay );Please note that the overlay will only show padding widths if the grid is completely fluid (i.e. the initial variables in the settings are all unitless).
The three breakpoint mixins generate media queries based on the $breakpoints settings specified in _column-settings.scss.
@include breakpoint-min( xs ) { ... }
@include breakpoint-max( sm ) { ... }
@include breakpoint-range( md, lg ) { ... }The above code compiles to something like this:
@media screen and (min-width: 0) { ... }
@media screen and (max-width: 30em) { ... }
@media screen and (min-width: 40em) and (max-width: 50em) { ... }full-width is a mixin used to break an element out of the layout and take up the full width of the viewport. It doesn’t take any arguments; its output is always the same. Use it like so:
.example {
@include full-width;
}The above code compiles to:
.example {
width: auto;
margin-left: calc(-50vw + 50%);
margin-right: calc(-50vw + 50%);
}Please note that full-width() only works on grids that are centered in the viewport.
-
For the most part, Column Setter code will compile even if you make a mistake—the invalid code will simply be ignored. If something isn’t working the way you expected, look for a
WARNINGon the command line. Column Setter can recognize common mistakes and help you troubleshoot them.WARNING: 'breakpoint-min(Gerald)' is invalid because 'Gerald' is not a valid breakpoint name. A 'breakpoint-min' mixin call must contain a valid breakpoint name, e.g. 'breakpoint-min(small)'. Current valid breakpoint names: xs, sm, md, lg, xl.
-
Elements are not confined to the width of their containers. Want an eight-column element inside a six-column container? No problem:
width: colspan( 8, 6 );
Want to center it? Remember,
colspan()values can be made negative:margin-left: colspan( -1+g, 8 ); -
Each breakpoint is required to specify a number of columns, but those column counts don’t all have to be unique. You might want certain elements to change at a certain breakpoint without changing the rest of the layout. Just add another breakpoint in
_column-settings.scsswith the same number of columns as the one before or after it.$breakpoints: ( small: ( cols: 6, min-width: 0 ), medium: ( cols: 10, min-width: 30em ), large: ( cols: 10, min-width: 35em ) );