-
Notifications
You must be signed in to change notification settings - Fork 225
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
[BFW-5513] [FEATURE REQUEST] PCTG as new Material #3589
Comments
PCTG seems to have the same Temp specs as ASA. Shall it still be added ? |
I've added PR #3591 for this request. It would be good if you can confirm that you successfully printed with that material on the MK4. |
I printed successfully. Have not fully worked out the retraction settings yet as my sample was a bit too moist after shipping (suspect the packaging was faulty). But after drying it prints ok. A bit of stringing, but that's it. |
Yes. It's much more straightforward from the user perspective. And combining them ("ASA/PCTG" in the menus, etc) would be a strange as they are completely different filament compositions. Leaving them as separate items, even if they have similar values under the hood, also allows the temps and profile characteristics to diverge over time if tuning and feedback suggest they print differently and do need different treatment. |
OK, then the PR should be fine for that. PCTG is a separate item. |
I added a new PR which allows usage of custom filament profiles, which is even more convenient :) |
I would also like to requst PCTG as new filament in the mk4. |
Also the XL could use the ability to load PCTG. PCTG is available in PrusaSlicer, but not in the material load menu, leading to lots of warnings when sending a print as the materials do not match |
Hey, I will try to push for adding support for custom material types. Unifying the related issues under the internal ticket BFW-5513 |
Hello, we've released a 6.2.0-alpha1 firmware with user material types support: https://github.com/prusa3d/Prusa-Firmware-Buddy/releases/tag/v6.2.0-alpha1 This means that while we decided to not put PCTG in our presets, you can set it up yourselves :) |
I just did the following: Everything worked perfectly, and there were no warnings, dialogs, or filament selectors bugging me about my filament choice in neither PrusaSlicer/Connect nor on the XL itself. Success! @CZDanol Thank you for listening to us |
If it makes sense, enter what type of printer or upgrade the feature request applies to.
Printer type - MK4
Describe the expected functionality
Add a new material profile for PCTG:
Nozzle temperature: 260°C
Heatbed termperature: 100°C
Two examples for this type of filament
https://www.3djake.com/fiberlogy/pctg-black
https://www.3djake.com/3djake/pctg-black-1
The text was updated successfully, but these errors were encountered: