diff --git a/Marlin/src/lcd/language/language_an.h b/Marlin/src/lcd/language/language_an.h index 787096994f7d..e5fc965ed1fa 100644 --- a/Marlin/src/lcd/language/language_an.h +++ b/Marlin/src/lcd/language/language_an.h @@ -106,10 +106,13 @@ namespace Language_an { PROGMEM Language_Str MSG_ACC = _UxGT("Aceleracion"); PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("Vel. viache min"); PROGMEM Language_Str MSG_ACCELERATION = _UxGT("Accel"); - PROGMEM Language_Str MSG_AMAX_A = _UxGT("Acel. max") LCD_STR_A; - PROGMEM Language_Str MSG_AMAX_B = _UxGT("Acel. max") LCD_STR_B; - PROGMEM Language_Str MSG_AMAX_C = _UxGT("Acel. max") LCD_STR_C; - PROGMEM Language_Str MSG_AMAX_E = _UxGT("Acel. max") LCD_STR_E; + PROGMEM Language_Str MSG_AMAX_A = _UxGT("Acel. max ") LCD_STR_A; + PROGMEM Language_Str MSG_AMAX_B = _UxGT("Acel. max ") LCD_STR_B; + PROGMEM Language_Str MSG_AMAX_C = _UxGT("Acel. max ") LCD_STR_C; + PROGMEM Language_Str MSG_AMAX_I = _UxGT("Acel. max ") LCD_STR_I; + PROGMEM Language_Str MSG_AMAX_J = _UxGT("Acel. max ") LCD_STR_J; + PROGMEM Language_Str MSG_AMAX_K = _UxGT("Acel. max ") LCD_STR_K; + PROGMEM Language_Str MSG_AMAX_E = _UxGT("Acel. max ") LCD_STR_E; PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Acel. max *"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("Acel. retrac."); PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("Acel. Viaje"); @@ -117,6 +120,9 @@ namespace Language_an { PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" trangos/mm"); PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" trangos/mm"); PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" trangos/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" trangos/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" trangos/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" trangos/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("E trangos/mm"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("* trangos/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperatura"); diff --git a/Marlin/src/lcd/language/language_bg.h b/Marlin/src/lcd/language/language_bg.h index 0d4291b8355d..37d896f60d58 100644 --- a/Marlin/src/lcd/language/language_bg.h +++ b/Marlin/src/lcd/language/language_bg.h @@ -99,9 +99,12 @@ namespace Language_bg { PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-откат"); PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("A-travel"); PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("Стъпки/mm"); - PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT("стъпки/mm"); - PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT("стъпки/mm"); - PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT("стъпки/mm"); + PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" стъпки/mm"); + PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" стъпки/mm"); + PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" стъпки/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" стъпки/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" стъпки/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" стъпки/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("E стъпки/mm"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("* стъпки/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Температура"); diff --git a/Marlin/src/lcd/language/language_ca.h b/Marlin/src/lcd/language/language_ca.h index f97a783d0183..19ba9acab74f 100644 --- a/Marlin/src/lcd/language/language_ca.h +++ b/Marlin/src/lcd/language/language_ca.h @@ -104,9 +104,12 @@ namespace Language_ca { PROGMEM Language_Str MSG_A_RETRACT = _UxGT("Accel. retracc"); PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("Accel. Viatge"); PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("Passos/mm"); - PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT("passos/mm"); - PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT("passos/mm"); - PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT("passos/mm"); + PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" passos/mm"); + PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" passos/mm"); + PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" passos/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" passos/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" passos/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" passos/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("Epassos/mm"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("*passos/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperatura"); diff --git a/Marlin/src/lcd/language/language_cz.h b/Marlin/src/lcd/language/language_cz.h index fa6a8e21a3ac..a6e97ea40ce2 100644 --- a/Marlin/src/lcd/language/language_cz.h +++ b/Marlin/src/lcd/language/language_cz.h @@ -268,33 +268,45 @@ namespace Language_cz { PROGMEM Language_Str MSG_SELECT_E = _UxGT("Vybrat *"); PROGMEM Language_Str MSG_ACC = _UxGT("Zrychl"); PROGMEM Language_Str MSG_JERK = _UxGT("Jerk"); - PROGMEM Language_Str MSG_VA_JERK = _UxGT("V") LCD_STR_A _UxGT("-jerk"); - PROGMEM Language_Str MSG_VB_JERK = _UxGT("V") LCD_STR_B _UxGT("-jerk"); - PROGMEM Language_Str MSG_VC_JERK = _UxGT("V") LCD_STR_C _UxGT("-jerk"); - PROGMEM Language_Str MSG_VE_JERK = _UxGT("Ve-Jerk"); + PROGMEM Language_Str MSG_VA_JERK = _UxGT("Max ") LCD_STR_A _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VB_JERK = _UxGT("Max ") LCD_STR_B _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VC_JERK = _UxGT("Max ") LCD_STR_C _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VI_JERK = _UxGT("Max ") LCD_STR_I _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("Max ") LCD_STR_J _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VK_JERK = _UxGT("Max ") LCD_STR_K _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VE_JERK = _UxGT("Max E Jerk"); PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Odchylka spoje"); PROGMEM Language_Str MSG_VELOCITY = _UxGT("Rychlost"); - PROGMEM Language_Str MSG_VMAX_A = _UxGT("Vmax ") LCD_STR_A; - PROGMEM Language_Str MSG_VMAX_B = _UxGT("Vmax ") LCD_STR_B; - PROGMEM Language_Str MSG_VMAX_C = _UxGT("Vmax ") LCD_STR_C; - PROGMEM Language_Str MSG_VMAX_E = _UxGT("Vmax ") LCD_STR_E; - PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Vmax *"); + PROGMEM Language_Str MSG_VMAX_A = _UxGT("Max ") LCD_STR_A _UxGT(" Rychlost"); + PROGMEM Language_Str MSG_VMAX_B = _UxGT("Max ") LCD_STR_B _UxGT(" Rychlost"); + PROGMEM Language_Str MSG_VMAX_C = _UxGT("Max ") LCD_STR_C _UxGT(" Rychlost"); + PROGMEM Language_Str MSG_VMAX_I = _UxGT("Max ") LCD_STR_I _UxGT(" Rychlost"); + PROGMEM Language_Str MSG_VMAX_J = _UxGT("Max ") LCD_STR_J _UxGT(" Rychlost"); + PROGMEM Language_Str MSG_VMAX_K = _UxGT("Max ") LCD_STR_K _UxGT(" Rychlost"); + PROGMEM Language_Str MSG_VMAX_E = _UxGT("Max ") LCD_STR_E _UxGT(" Rychlost"); + PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Max * Rychlost"); PROGMEM Language_Str MSG_VMIN = _UxGT("Vmin"); PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("VTrav Min"); PROGMEM Language_Str MSG_ACCELERATION = _UxGT("Akcelerace"); - PROGMEM Language_Str MSG_AMAX_A = _UxGT("Amax ") LCD_STR_A; - PROGMEM Language_Str MSG_AMAX_B = _UxGT("Amax ") LCD_STR_B; - PROGMEM Language_Str MSG_AMAX_C = _UxGT("Amax ") LCD_STR_C; - PROGMEM Language_Str MSG_AMAX_E = _UxGT("Amax ") LCD_STR_E; - PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Amax *"); + PROGMEM Language_Str MSG_AMAX_A = _UxGT("Max ") LCD_STR_A _UxGT(" Akcel"); + PROGMEM Language_Str MSG_AMAX_B = _UxGT("Max ") LCD_STR_B _UxGT(" Akcel"); + PROGMEM Language_Str MSG_AMAX_C = _UxGT("Max ") LCD_STR_C _UxGT(" Akcel"); + PROGMEM Language_Str MSG_AMAX_I = _UxGT("Max ") LCD_STR_I _UxGT(" Akcel"); + PROGMEM Language_Str MSG_AMAX_J = _UxGT("Max ") LCD_STR_J _UxGT(" Akcel"); + PROGMEM Language_Str MSG_AMAX_K = _UxGT("Max ") LCD_STR_K _UxGT(" Akcel"); + PROGMEM Language_Str MSG_AMAX_E = _UxGT("Max ") LCD_STR_E _UxGT(" Akcel"); + PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Max * Akcel"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-retrakt"); PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("A-přejezd"); PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("Kroků/mm"); - PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT("kroků/mm"); - PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT("kroků/mm"); - PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT("kroků/mm"); - PROGMEM Language_Str MSG_E_STEPS = _UxGT("Ekroků/mm"); - PROGMEM Language_Str MSG_EN_STEPS = _UxGT("*kroků/mm"); + PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" kroků/mm"); + PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" kroků/mm"); + PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" kroků/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" kroků/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" kroků/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" kroků/mm"); + PROGMEM Language_Str MSG_E_STEPS = _UxGT("E kroků/mm"); + PROGMEM Language_Str MSG_EN_STEPS = _UxGT("* kroků/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Teplota"); PROGMEM Language_Str MSG_MOTION = _UxGT("Pohyb"); PROGMEM Language_Str MSG_FILAMENT = _UxGT("Filament"); @@ -475,9 +487,12 @@ namespace Language_cz { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Teplota max"); PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Nap. zdroj"); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Buzení motorů"); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Motor %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Motor %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Motor %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" Motor %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" Motor %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" Motor %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" Motor %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" Motor %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" Motor %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E Motor %"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC uložit EEPROM"); PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("TMC CHYBA SPOJENÍ"); @@ -590,6 +605,9 @@ namespace Language_cz { PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A; PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B; PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C; + PROGMEM Language_Str MSG_BACKLASH_I = LCD_STR_I; + PROGMEM Language_Str MSG_BACKLASH_J = LCD_STR_J; + PROGMEM Language_Str MSG_BACKLASH_K = LCD_STR_K; PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Korekce"); PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("Vyhlazení"); } diff --git a/Marlin/src/lcd/language/language_da.h b/Marlin/src/lcd/language/language_da.h index 95c2573ae144..ef312f1334cd 100644 --- a/Marlin/src/lcd/language/language_da.h +++ b/Marlin/src/lcd/language/language_da.h @@ -176,9 +176,12 @@ namespace Language_da { PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Strømfors."); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Driv Styrke"); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Driv %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Driv %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Driv %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" Driv %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" Driv %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" Driv %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" Driv %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" Driv %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" Driv %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E Driv %"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC EEPROM Skriv"); diff --git a/Marlin/src/lcd/language/language_de.h b/Marlin/src/lcd/language/language_de.h index f06370078a4b..0fa895638b12 100644 --- a/Marlin/src/lcd/language/language_de.h +++ b/Marlin/src/lcd/language/language_de.h @@ -271,15 +271,21 @@ namespace Language_de { PROGMEM Language_Str MSG_SELECT_E = _UxGT("Auswählen *"); PROGMEM Language_Str MSG_ACC = _UxGT("Beschleunigung"); PROGMEM Language_Str MSG_JERK = _UxGT("Jerk"); - PROGMEM Language_Str MSG_VA_JERK = _UxGT("V ") LCD_STR_A _UxGT(" Jerk"); - PROGMEM Language_Str MSG_VB_JERK = _UxGT("V ") LCD_STR_B _UxGT(" Jerk"); - PROGMEM Language_Str MSG_VC_JERK = _UxGT("V ") LCD_STR_C _UxGT(" Jerk"); - PROGMEM Language_Str MSG_VE_JERK = _UxGT("V E Jerk"); + PROGMEM Language_Str MSG_VA_JERK = _UxGT("Max ") LCD_STR_A _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VB_JERK = _UxGT("Max ") LCD_STR_B _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VC_JERK = _UxGT("Max ") LCD_STR_C _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VI_JERK = _UxGT("Max ") LCD_STR_I _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("Max ") LCD_STR_J _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VK_JERK = _UxGT("Max ") LCD_STR_K _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VE_JERK = _UxGT("Max E Jerk"); PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Junction Dev"); PROGMEM Language_Str MSG_VELOCITY = _UxGT("Geschwindigkeit"); PROGMEM Language_Str MSG_VMAX_A = _UxGT("V max ") LCD_STR_A; PROGMEM Language_Str MSG_VMAX_B = _UxGT("V max ") LCD_STR_B; PROGMEM Language_Str MSG_VMAX_C = _UxGT("V max ") LCD_STR_C; + PROGMEM Language_Str MSG_VMAX_I = _UxGT("V max ") LCD_STR_I; + PROGMEM Language_Str MSG_VMAX_J = _UxGT("V max ") LCD_STR_J; + PROGMEM Language_Str MSG_VMAX_K = _UxGT("V max ") LCD_STR_K; PROGMEM Language_Str MSG_VMAX_E = _UxGT("V max ") LCD_STR_E; PROGMEM Language_Str MSG_VMAX_EN = _UxGT("V max *"); PROGMEM Language_Str MSG_VMIN = _UxGT("V min "); @@ -289,6 +295,9 @@ namespace Language_de { PROGMEM Language_Str MSG_AMAX_A = _UxGT("A max ") LCD_STR_A; PROGMEM Language_Str MSG_AMAX_B = _UxGT("A max ") LCD_STR_B; PROGMEM Language_Str MSG_AMAX_C = _UxGT("A max ") LCD_STR_C; + PROGMEM Language_Str MSG_AMAX_I = _UxGT("A max ") LCD_STR_I; + PROGMEM Language_Str MSG_AMAX_J = _UxGT("A max ") LCD_STR_J; + PROGMEM Language_Str MSG_AMAX_K = _UxGT("A max ") LCD_STR_K; PROGMEM Language_Str MSG_AMAX_E = _UxGT("A max ") LCD_STR_E; PROGMEM Language_Str MSG_AMAX_EN = _UxGT("A max *"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A Einzug"); @@ -299,6 +308,9 @@ namespace Language_de { PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" Steps/mm"); PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" Steps/mm"); PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" Steps/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" Steps/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" Steps/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" Steps/mm"); PROGMEM Language_Str MSG_E_STEPS = LCD_STR_E _UxGT(" Steps/mm"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("* Steps/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperatur"); @@ -499,9 +511,12 @@ namespace Language_de { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Max Temp"); PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Netzteil"); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Motorleistung"); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Treiber %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Treiber %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Treiber %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" Treiber %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" Treiber %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" Treiber %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" Treiber %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" Treiber %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" Treiber %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E Treiber %"); PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("TMC Verbindungsfehler"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("Werte speichern"); @@ -618,6 +633,9 @@ namespace Language_de { PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A; PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B; PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C; + PROGMEM Language_Str MSG_BACKLASH_I = LCD_STR_I; + PROGMEM Language_Str MSG_BACKLASH_J = LCD_STR_J; + PROGMEM Language_Str MSG_BACKLASH_K = LCD_STR_K; PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Korrektur"); PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("Glätten"); PROGMEM Language_Str MSG_LEVEL_X_AXIS = _UxGT("X Achse leveln"); diff --git a/Marlin/src/lcd/language/language_el.h b/Marlin/src/lcd/language/language_el.h index b69b4695d3be..824b90a232d4 100644 --- a/Marlin/src/lcd/language/language_el.h +++ b/Marlin/src/lcd/language/language_el.h @@ -108,10 +108,16 @@ namespace Language_el { PROGMEM Language_Str MSG_VA_JERK = _UxGT("Vαντίδραση ") LCD_STR_A; PROGMEM Language_Str MSG_VB_JERK = _UxGT("Vαντίδραση ") LCD_STR_B; PROGMEM Language_Str MSG_VC_JERK = _UxGT("Vαντίδραση ") LCD_STR_C; + PROGMEM Language_Str MSG_VI_JERK = _UxGT("Vαντίδραση ") LCD_STR_I; + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("Vαντίδραση ") LCD_STR_J; + PROGMEM Language_Str MSG_VK_JERK = _UxGT("Vαντίδραση ") LCD_STR_K; PROGMEM Language_Str MSG_VE_JERK = _UxGT("Vαντίδραση E"); PROGMEM Language_Str MSG_VMAX_A = _UxGT("V Μέγιστο") LCD_STR_A; PROGMEM Language_Str MSG_VMAX_B = _UxGT("V Μέγιστο") LCD_STR_B; PROGMEM Language_Str MSG_VMAX_C = _UxGT("V Μέγιστο") LCD_STR_C; + PROGMEM Language_Str MSG_VMAX_I = _UxGT("V Μέγιστο") LCD_STR_I; + PROGMEM Language_Str MSG_VMAX_J = _UxGT("V Μέγιστο") LCD_STR_J; + PROGMEM Language_Str MSG_VMAX_K = _UxGT("V Μέγιστο") LCD_STR_K; PROGMEM Language_Str MSG_VMAX_E = _UxGT("V Μέγιστο") LCD_STR_E; PROGMEM Language_Str MSG_VMAX_EN = _UxGT("V Μέγιστο *"); PROGMEM Language_Str MSG_VMIN = _UxGT("V Ελάχιστο"); @@ -120,6 +126,9 @@ namespace Language_el { PROGMEM Language_Str MSG_AMAX_A = _UxGT("Aμεγ ") LCD_STR_A; PROGMEM Language_Str MSG_AMAX_B = _UxGT("Aμεγ ") LCD_STR_B; PROGMEM Language_Str MSG_AMAX_C = _UxGT("Aμεγ ") LCD_STR_C; + PROGMEM Language_Str MSG_AMAX_I = _UxGT("Aμεγ ") LCD_STR_I; + PROGMEM Language_Str MSG_AMAX_J = _UxGT("Aμεγ ") LCD_STR_J; + PROGMEM Language_Str MSG_AMAX_K = _UxGT("Aμεγ ") LCD_STR_K; PROGMEM Language_Str MSG_AMAX_E = _UxGT("Aμεγ ") LCD_STR_E; PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Aμεγ *"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("Α-ανάσυρση"); @@ -128,6 +137,9 @@ namespace Language_el { PROGMEM Language_Str MSG_A_STEPS = _UxGT("Bήματα ") LCD_STR_A _UxGT(" ανά μμ"); PROGMEM Language_Str MSG_B_STEPS = _UxGT("Bήματα ") LCD_STR_B _UxGT(" ανά μμ"); PROGMEM Language_Str MSG_C_STEPS = _UxGT("Bήματα ") LCD_STR_C _UxGT(" ανά μμ"); + PROGMEM Language_Str MSG_I_STEPS = _UxGT("Bήματα ") LCD_STR_I _UxGT(" ανά μμ"); + PROGMEM Language_Str MSG_J_STEPS = _UxGT("Bήματα ") LCD_STR_J _UxGT(" ανά μμ"); + PROGMEM Language_Str MSG_K_STEPS = _UxGT("Bήματα ") LCD_STR_K _UxGT(" ανά μμ"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("Bήματα Ε ανά μμ"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("Bήματα * ανά μμ"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Θερμοκρασία"); diff --git a/Marlin/src/lcd/language/language_el_gr.h b/Marlin/src/lcd/language/language_el_gr.h index 208d7c2363be..e5c169446b6b 100644 --- a/Marlin/src/lcd/language/language_el_gr.h +++ b/Marlin/src/lcd/language/language_el_gr.h @@ -110,10 +110,16 @@ namespace Language_el_gr { PROGMEM Language_Str MSG_VA_JERK = _UxGT("Vαντίδραση ") LCD_STR_A; PROGMEM Language_Str MSG_VB_JERK = _UxGT("Vαντίδραση ") LCD_STR_B; PROGMEM Language_Str MSG_VC_JERK = _UxGT("Vαντίδραση ") LCD_STR_C; + PROGMEM Language_Str MSG_VI_JERK = _UxGT("Vαντίδραση ") LCD_STR_I; + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("Vαντίδραση ") LCD_STR_J; + PROGMEM Language_Str MSG_VK_JERK = _UxGT("Vαντίδραση ") LCD_STR_K; PROGMEM Language_Str MSG_VE_JERK = _UxGT("Vαντίδραση E"); PROGMEM Language_Str MSG_VMAX_A = _UxGT("Vμεγ ") LCD_STR_A; PROGMEM Language_Str MSG_VMAX_B = _UxGT("Vμεγ ") LCD_STR_B; PROGMEM Language_Str MSG_VMAX_C = _UxGT("Vμεγ ") LCD_STR_C; + PROGMEM Language_Str MSG_VMAX_I = _UxGT("Vμεγ ") LCD_STR_I; + PROGMEM Language_Str MSG_VMAX_J = _UxGT("Vμεγ ") LCD_STR_J; + PROGMEM Language_Str MSG_VMAX_K = _UxGT("Vμεγ ") LCD_STR_K; PROGMEM Language_Str MSG_VMAX_E = _UxGT("Vμεγ ") LCD_STR_E; PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Vμεγ *"); PROGMEM Language_Str MSG_VMIN = _UxGT("Vελαχ"); @@ -122,6 +128,9 @@ namespace Language_el_gr { PROGMEM Language_Str MSG_AMAX_A = _UxGT("Aμεγ ") LCD_STR_A; PROGMEM Language_Str MSG_AMAX_B = _UxGT("Aμεγ ") LCD_STR_B; PROGMEM Language_Str MSG_AMAX_C = _UxGT("Aμεγ ") LCD_STR_C; + PROGMEM Language_Str MSG_AMAX_I = _UxGT("Aμεγ ") LCD_STR_I; + PROGMEM Language_Str MSG_AMAX_J = _UxGT("Aμεγ ") LCD_STR_J; + PROGMEM Language_Str MSG_AMAX_K = _UxGT("Aμεγ ") LCD_STR_K; PROGMEM Language_Str MSG_AMAX_E = _UxGT("Aμεγ ") LCD_STR_E; PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Aμεγ *"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("Α-ανάσυρση"); @@ -130,6 +139,9 @@ namespace Language_el_gr { PROGMEM Language_Str MSG_A_STEPS = _UxGT("Bήματα ") LCD_STR_A _UxGT(" ανά μμ"); PROGMEM Language_Str MSG_B_STEPS = _UxGT("Bήματα ") LCD_STR_B _UxGT(" ανά μμ"); PROGMEM Language_Str MSG_C_STEPS = _UxGT("Bήματα ") LCD_STR_C _UxGT(" ανά μμ"); + PROGMEM Language_Str MSG_I_STEPS = _UxGT("Bήματα ") LCD_STR_I _UxGT(" ανά μμ"); + PROGMEM Language_Str MSG_J_STEPS = _UxGT("Bήματα ") LCD_STR_J _UxGT(" ανά μμ"); + PROGMEM Language_Str MSG_K_STEPS = _UxGT("Bήματα ") LCD_STR_K _UxGT(" ανά μμ"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("Bήματα Ε ανά μμ"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("Bήματα * ανά μμ"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Θερμοκρασία"); diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h index 85ddcb4bc412..ede69046275e 100644 --- a/Marlin/src/lcd/language/language_en.h +++ b/Marlin/src/lcd/language/language_en.h @@ -139,8 +139,8 @@ namespace Language_en { PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("Bed Leveling"); PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("Level Bed"); PROGMEM Language_Str MSG_BED_TRAMMING = _UxGT("Bed Tramming"); - PROGMEM Language_Str MSG_BED_TRAMMING_RAISE = _UxGT("Raise Bed Until Probe Triggered"); - PROGMEM Language_Str MSG_BED_TRAMMING_IN_RANGE = _UxGT("All Corners Within Tolerance. Level Bed"); + PROGMEM Language_Str MSG_BED_TRAMMING_RAISE = _UxGT("Adjust bed until the probe triggers."); + PROGMEM Language_Str MSG_BED_TRAMMING_IN_RANGE = _UxGT("Corners within tolerance. Bed trammed."); PROGMEM Language_Str MSG_BED_TRAMMING_GOOD_POINTS = _UxGT("Good Points: "); PROGMEM Language_Str MSG_BED_TRAMMING_LAST_Z = _UxGT("Last Z: "); PROGMEM Language_Str MSG_NEXT_CORNER = _UxGT("Next Corner"); @@ -318,6 +318,7 @@ namespace Language_en { PROGMEM Language_Str MSG_LCD_OFF = _UxGT("Off"); PROGMEM Language_Str MSG_PID_AUTOTUNE = _UxGT("PID Autotune"); PROGMEM Language_Str MSG_PID_AUTOTUNE_E = _UxGT("PID Autotune *"); + PROGMEM Language_Str MSG_PID_CYCLE = _UxGT("PID Cycle"); PROGMEM Language_Str MSG_PID_AUTOTUNE_DONE = _UxGT("PID tuning done"); PROGMEM Language_Str MSG_PID_BAD_EXTRUDER_NUM = _UxGT("Autotune failed. Bad extruder."); PROGMEM Language_Str MSG_PID_TEMP_TOO_HIGH = _UxGT("Autotune failed. Temperature too high."); @@ -345,29 +346,29 @@ namespace Language_en { PROGMEM Language_Str MSG_VE_JERK = _UxGT("Max E Jerk"); PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Junction Dev"); PROGMEM Language_Str MSG_VELOCITY = _UxGT("Velocity"); - PROGMEM Language_Str MSG_VMAX_A = _UxGT("Vmax ") LCD_STR_A; - PROGMEM Language_Str MSG_VMAX_B = _UxGT("Vmax ") LCD_STR_B; - PROGMEM Language_Str MSG_VMAX_C = _UxGT("Vmax ") LCD_STR_C; - PROGMEM Language_Str MSG_VMAX_I = _UxGT("Vmax ") LCD_STR_I; - PROGMEM Language_Str MSG_VMAX_J = _UxGT("Vmax ") LCD_STR_J; - PROGMEM Language_Str MSG_VMAX_K = _UxGT("Vmax ") LCD_STR_K; - PROGMEM Language_Str MSG_VMAX_E = _UxGT("Vmax ") LCD_STR_E; - PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Vmax *"); - PROGMEM Language_Str MSG_VMIN = _UxGT("Vmin"); - PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("VTrav Min"); + PROGMEM Language_Str MSG_VMAX_A = _UxGT("Max ") LCD_STR_A _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_B = _UxGT("Max ") LCD_STR_B _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_C = _UxGT("Max ") LCD_STR_C _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_I = _UxGT("Max ") LCD_STR_I _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_J = _UxGT("Max ") LCD_STR_J _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_K = _UxGT("Max ") LCD_STR_K _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_E = _UxGT("Max ") LCD_STR_E _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Max * Vel"); + PROGMEM Language_Str MSG_VMIN = _UxGT("Min Velocity"); + PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("Min Travel Vel"); PROGMEM Language_Str MSG_ACCELERATION = _UxGT("Acceleration"); - PROGMEM Language_Str MSG_AMAX_A = _UxGT("Amax ") LCD_STR_A; - PROGMEM Language_Str MSG_AMAX_B = _UxGT("Amax ") LCD_STR_B; - PROGMEM Language_Str MSG_AMAX_C = _UxGT("Amax ") LCD_STR_C; - PROGMEM Language_Str MSG_AMAX_I = _UxGT("Amax ") LCD_STR_I; - PROGMEM Language_Str MSG_AMAX_J = _UxGT("Amax ") LCD_STR_J; - PROGMEM Language_Str MSG_AMAX_K = _UxGT("Amax ") LCD_STR_K; - PROGMEM Language_Str MSG_AMAX_E = _UxGT("Amax ") LCD_STR_E; - PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Amax *"); - PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-Retract"); - PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("A-Travel"); - PROGMEM Language_Str MSG_XY_FREQUENCY_LIMIT = _UxGT("Frequency max"); - PROGMEM Language_Str MSG_XY_FREQUENCY_FEEDRATE = _UxGT("Feed min"); + PROGMEM Language_Str MSG_AMAX_A = _UxGT("Max ") LCD_STR_A _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_B = _UxGT("Max ") LCD_STR_B _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_C = _UxGT("Max ") LCD_STR_C _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_I = _UxGT("Max ") LCD_STR_I _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_J = _UxGT("Max ") LCD_STR_J _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_K = _UxGT("Max ") LCD_STR_K _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_E = _UxGT("Max ") LCD_STR_E _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Max * Accel"); + PROGMEM Language_Str MSG_A_RETRACT = _UxGT("Retract Accel"); + PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("Travel Accel"); + PROGMEM Language_Str MSG_XY_FREQUENCY_LIMIT = _UxGT("XY Freq Limit"); + PROGMEM Language_Str MSG_XY_FREQUENCY_FEEDRATE = _UxGT("Min FR Factor"); PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("Steps/mm"); PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" Steps/mm"); PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" Steps/mm"); @@ -423,7 +424,7 @@ namespace Language_en { PROGMEM Language_Str MSG_PAUSING = _UxGT("Pausing..."); PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("Pause Print"); PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("Resume Print"); - PROGMEM Language_Str MSG_HOST_START_PRINT = _UxGT("Host Start"); + PROGMEM Language_Str MSG_HOST_START_PRINT = _UxGT("Start Host Print"); PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("Stop Print"); PROGMEM Language_Str MSG_END_LOOPS = _UxGT("End Repeat Loops"); PROGMEM Language_Str MSG_PRINTING_OBJECT = _UxGT("Printing Object"); @@ -588,12 +589,12 @@ namespace Language_en { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Max Temp"); PROGMEM Language_Str MSG_INFO_PSU = _UxGT("PSU"); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Drive Strength"); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_I = AXIS4_STR _UxGT(" Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_J = AXIS5_STR _UxGT(" Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_K = AXIS6_STR _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" Driver %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E Driver %"); PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("TMC CONNECTION ERROR"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC EEPROM Write"); diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h index 8fdf0bd47ed2..46e4e262e76c 100644 --- a/Marlin/src/lcd/language/language_es.h +++ b/Marlin/src/lcd/language/language_es.h @@ -105,7 +105,7 @@ namespace Language_es { PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("Mover ejes"); PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("Nivelando Cama"); PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("Nivelar Cama"); - PROGMEM Language_Str MSG_BED_TRAMMING = _UxGT("Recorrido asistido"); + PROGMEM Language_Str MSG_BED_TRAMMING = _UxGT("Recorrido Cama"); PROGMEM Language_Str MSG_NEXT_CORNER = _UxGT("Siguente Esquina"); PROGMEM Language_Str MSG_MESH_EDITOR = _UxGT("Editor Mallado"); PROGMEM Language_Str MSG_EDIT_MESH = _UxGT("Editar Mallado"); @@ -269,23 +269,32 @@ namespace Language_es { PROGMEM Language_Str MSG_SELECT_E = _UxGT("Seleccionar *"); PROGMEM Language_Str MSG_ACC = _UxGT("Aceleración"); PROGMEM Language_Str MSG_JERK = _UxGT("Jerk"); - PROGMEM Language_Str MSG_VA_JERK = _UxGT("V") LCD_STR_A _UxGT("-Jerk"); - PROGMEM Language_Str MSG_VB_JERK = _UxGT("V") LCD_STR_B _UxGT("-Jerk"); - PROGMEM Language_Str MSG_VC_JERK = _UxGT("V") LCD_STR_C _UxGT("-Jerk"); - PROGMEM Language_Str MSG_VE_JERK = _UxGT("Ve-Jerk"); + PROGMEM Language_Str MSG_VA_JERK = _UxGT("Max ") LCD_STR_A _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VB_JERK = _UxGT("Max ") LCD_STR_B _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VC_JERK = _UxGT("Max ") LCD_STR_C _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VI_JERK = _UxGT("Max ") LCD_STR_I _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("Max ") LCD_STR_J _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VK_JERK = _UxGT("Max ") LCD_STR_K _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VE_JERK = _UxGT("Max E Jerk"); PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Desvi. Unión"); PROGMEM Language_Str MSG_VELOCITY = _UxGT("Velocidad"); - PROGMEM Language_Str MSG_VMAX_A = _UxGT("Vmax ") LCD_STR_A; - PROGMEM Language_Str MSG_VMAX_B = _UxGT("Vmax ") LCD_STR_B; - PROGMEM Language_Str MSG_VMAX_C = _UxGT("Vmax ") LCD_STR_C; - PROGMEM Language_Str MSG_VMAX_E = _UxGT("Vmax ") LCD_STR_E; - PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Vmax *"); + PROGMEM Language_Str MSG_VMAX_A = _UxGT("Max ") LCD_STR_A _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_B = _UxGT("Max ") LCD_STR_B _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_C = _UxGT("Max ") LCD_STR_C _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_I = _UxGT("Max ") LCD_STR_I _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_J = _UxGT("Max ") LCD_STR_J _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_K = _UxGT("Max ") LCD_STR_K _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_E = _UxGT("Max ") LCD_STR_E _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Max * Vel"); PROGMEM Language_Str MSG_VMIN = _UxGT("Vmin"); PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("Vel. viaje min"); PROGMEM Language_Str MSG_ACCELERATION = _UxGT("Acceleración"); PROGMEM Language_Str MSG_AMAX_A = _UxGT("Acel. max") LCD_STR_A; PROGMEM Language_Str MSG_AMAX_B = _UxGT("Acel. max") LCD_STR_B; PROGMEM Language_Str MSG_AMAX_C = _UxGT("Acel. max") LCD_STR_C; + PROGMEM Language_Str MSG_AMAX_I = _UxGT("Acel. max") LCD_STR_I; + PROGMEM Language_Str MSG_AMAX_J = _UxGT("Acel. max") LCD_STR_J; + PROGMEM Language_Str MSG_AMAX_K = _UxGT("Acel. max") LCD_STR_K; PROGMEM Language_Str MSG_AMAX_E = _UxGT("Acel. max") LCD_STR_E; PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Acel. max *"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("Acel. retrac."); @@ -294,6 +303,9 @@ namespace Language_es { PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" pasos/mm"); PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" pasos/mm"); PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" pasos/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" pasos/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" pasos/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" pasos/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("E pasos/mm"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("* pasos/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperatura"); @@ -473,9 +485,12 @@ namespace Language_es { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Temp. Máxima"); PROGMEM Language_Str MSG_INFO_PSU = _UxGT("F. Aliment."); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Fuerza de empuje"); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" Driver %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E Driver %"); PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("ERROR CONEX. TMC"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("Escribe DAC EEPROM"); @@ -575,6 +590,9 @@ namespace Language_es { PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A; PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B; PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C; + PROGMEM Language_Str MSG_BACKLASH_I = LCD_STR_I; + PROGMEM Language_Str MSG_BACKLASH_J = LCD_STR_J; + PROGMEM Language_Str MSG_BACKLASH_K = LCD_STR_K; PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Corrección"); PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("Suavizado"); diff --git a/Marlin/src/lcd/language/language_eu.h b/Marlin/src/lcd/language/language_eu.h index 530742d6d3a2..30cc4931d80d 100644 --- a/Marlin/src/lcd/language/language_eu.h +++ b/Marlin/src/lcd/language/language_eu.h @@ -167,6 +167,9 @@ namespace Language_eu { PROGMEM Language_Str MSG_VA_JERK = _UxGT("V") LCD_STR_A _UxGT("-astindua"); PROGMEM Language_Str MSG_VB_JERK = _UxGT("V") LCD_STR_B _UxGT("-astindua"); PROGMEM Language_Str MSG_VC_JERK = _UxGT("V") LCD_STR_C _UxGT("-astindua"); + PROGMEM Language_Str MSG_VI_JERK = _UxGT("V") LCD_STR_I _UxGT("-astindua"); + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("V") LCD_STR_J _UxGT("-astindua"); + PROGMEM Language_Str MSG_VK_JERK = _UxGT("V") LCD_STR_K _UxGT("-astindua"); PROGMEM Language_Str MSG_VE_JERK = _UxGT("Ve-astindua"); PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("VBidaia min"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-retrakt"); @@ -175,6 +178,9 @@ namespace Language_eu { PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" pausoak/mm"); PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" pausoak/mm"); PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" pausoak/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" pausoak/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" pausoak/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" pausoak/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("E pausoak/mm"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("* pausoak/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Tenperatura"); @@ -294,9 +300,12 @@ namespace Language_eu { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Tenp. Maximoa"); PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Elikadura-iturria"); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Driver-aren potentzia"); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" Driver %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E Driver %"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("Idatzi DAC EEPROM"); PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("HARIZPIA ALDATU"); diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h index 6032937e0f18..e0f13356ba17 100644 --- a/Marlin/src/lcd/language/language_fr.h +++ b/Marlin/src/lcd/language/language_fr.h @@ -110,7 +110,7 @@ namespace Language_fr { PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("Déplacer un axe"); PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("Régler Niv. lit"); PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("Niveau du lit"); - PROGMEM Language_Str MSG_BED_TRAMMING = _UxGT("Assistant Molettes"); + PROGMEM Language_Str MSG_BED_TRAMMING = _UxGT("Niveau des coins"); PROGMEM Language_Str MSG_BED_TRAMMING_RAISE = _UxGT("Relever le coin jusqu'à la sonde"); PROGMEM Language_Str MSG_BED_TRAMMING_IN_RANGE = _UxGT("Coins dans la tolérance. Niveau lit "); PROGMEM Language_Str MSG_NEXT_CORNER = _UxGT("Coin suivant"); @@ -521,12 +521,12 @@ namespace Language_fr { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Temp Max"); PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Alim."); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Puiss. moteur "); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("Driver X %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Driver Y %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Driver Z %"); - PROGMEM Language_Str MSG_DAC_PERCENT_I = _UxGT("Driver " AXIS4_STR " %"); - PROGMEM Language_Str MSG_DAC_PERCENT_J = _UxGT("Driver " AXIS5_STR " %"); - PROGMEM Language_Str MSG_DAC_PERCENT_K = _UxGT("Driver " AXIS6_STR " %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = _UxGT("Driver ") LCD_STR_A _UxGT(" %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = _UxGT("Driver ") LCD_STR_B _UxGT(" %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = _UxGT("Driver ") LCD_STR_C _UxGT(" %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = _UxGT("Driver ") LCD_STR_I _UxGT(" %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = _UxGT("Driver ") LCD_STR_J _UxGT(" %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = _UxGT("Driver ") LCD_STR_K _UxGT(" %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("Driver E %"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC EEPROM sauv."); PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("ERREUR CONNEXION TMC"); diff --git a/Marlin/src/lcd/language/language_gl.h b/Marlin/src/lcd/language/language_gl.h index 8defd2b01f37..f657d5e34d7f 100644 --- a/Marlin/src/lcd/language/language_gl.h +++ b/Marlin/src/lcd/language/language_gl.h @@ -271,25 +271,34 @@ namespace Language_gl { PROGMEM Language_Str MSG_SELECT_E = _UxGT("Escolla *"); PROGMEM Language_Str MSG_ACC = _UxGT("Acel"); PROGMEM Language_Str MSG_JERK = _UxGT("Jerk"); - PROGMEM Language_Str MSG_VA_JERK = _UxGT("V") LCD_STR_A _UxGT("-Jerk"); - PROGMEM Language_Str MSG_VB_JERK = _UxGT("V") LCD_STR_B _UxGT("-Jerk"); - PROGMEM Language_Str MSG_VC_JERK = _UxGT("V") LCD_STR_C _UxGT("-Jerk"); - PROGMEM Language_Str MSG_VE_JERK = _UxGT("Ve-Jerk"); + PROGMEM Language_Str MSG_VA_JERK = _UxGT("Max ") LCD_STR_A _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VB_JERK = _UxGT("Max ") LCD_STR_B _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VC_JERK = _UxGT("Max ") LCD_STR_C _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VI_JERK = _UxGT("Max ") LCD_STR_I _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("Max ") LCD_STR_J _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VK_JERK = _UxGT("Max ") LCD_STR_K _UxGT(" Jerk"); + PROGMEM Language_Str MSG_VE_JERK = _UxGT("Max E Jerk"); PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Desvío Unión"); PROGMEM Language_Str MSG_VELOCITY = _UxGT("Velocidade"); - PROGMEM Language_Str MSG_VMAX_A = _UxGT("Vmax ") LCD_STR_A; - PROGMEM Language_Str MSG_VMAX_B = _UxGT("Vmax ") LCD_STR_B; - PROGMEM Language_Str MSG_VMAX_C = _UxGT("Vmax ") LCD_STR_C; - PROGMEM Language_Str MSG_VMAX_E = _UxGT("Vmax ") LCD_STR_E; - PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Vmax *"); + PROGMEM Language_Str MSG_VMAX_A = _UxGT("Max ") LCD_STR_A _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_B = _UxGT("Max ") LCD_STR_B _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_C = _UxGT("Max ") LCD_STR_C _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_I = _UxGT("Max ") LCD_STR_I _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_J = _UxGT("Max ") LCD_STR_J _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_K = _UxGT("Max ") LCD_STR_K _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_E = _UxGT("Max ") LCD_STR_E _UxGT(" Vel"); + PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Max * Vel"); PROGMEM Language_Str MSG_VMIN = _UxGT("Vmin"); PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("V-viaxe min"); PROGMEM Language_Str MSG_ACCELERATION = _UxGT("Aceleración"); - PROGMEM Language_Str MSG_AMAX_A = _UxGT("Amax") LCD_STR_A; - PROGMEM Language_Str MSG_AMAX_B = _UxGT("Amax") LCD_STR_B; - PROGMEM Language_Str MSG_AMAX_C = _UxGT("Amax") LCD_STR_C; - PROGMEM Language_Str MSG_AMAX_E = _UxGT("Amax") LCD_STR_E; - PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Amax *"); + PROGMEM Language_Str MSG_AMAX_A = _UxGT("Max ") LCD_STR_A _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_B = _UxGT("Max ") LCD_STR_B _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_C = _UxGT("Max ") LCD_STR_C _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_I = _UxGT("Max ") LCD_STR_I _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_J = _UxGT("Max ") LCD_STR_J _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_K = _UxGT("Max ") LCD_STR_K _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_E = _UxGT("Max ") LCD_STR_E _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Max * Accel"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-retrac."); PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("A-viaxe"); PROGMEM Language_Str MSG_XY_FREQUENCY_LIMIT = _UxGT("Frecuencia max"); @@ -298,6 +307,9 @@ namespace Language_gl { PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" pasos/mm"); PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" pasos/mm"); PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" pasos/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" pasos/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" pasos/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" pasos/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("E pasos/mm"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("* pasos/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperatura"); @@ -490,9 +502,12 @@ namespace Language_gl { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Temp Máx"); PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Fonte Alimentación"); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Forza do Motor"); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" Driver %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E Driver %"); PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("ERRO CONEX. TMC"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("Escribe DAC EEPROM"); @@ -593,6 +608,9 @@ namespace Language_gl { PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A; PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B; PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C; + PROGMEM Language_Str MSG_BACKLASH_I = LCD_STR_I; + PROGMEM Language_Str MSG_BACKLASH_J = LCD_STR_J; + PROGMEM Language_Str MSG_BACKLASH_K = LCD_STR_K; PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Corrección"); PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("Suavizado"); diff --git a/Marlin/src/lcd/language/language_hu.h b/Marlin/src/lcd/language/language_hu.h index 6fb41f90ff2d..444c29560b14 100644 --- a/Marlin/src/lcd/language/language_hu.h +++ b/Marlin/src/lcd/language/language_hu.h @@ -132,7 +132,7 @@ namespace Language_hu { PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("Tengelyek mozgatása"); PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("Ágy szintezés"); PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("Ágy szintezése"); - PROGMEM Language_Str MSG_BED_TRAMMING = _UxGT("Elektromos segéd"); + PROGMEM Language_Str MSG_BED_TRAMMING = _UxGT("Sarok szint"); PROGMEM Language_Str MSG_BED_TRAMMING_RAISE = _UxGT("Ágy emelése a szonda váltásig"); PROGMEM Language_Str MSG_BED_TRAMMING_IN_RANGE = _UxGT("Minden sarok tolerancián belül. Szint jó."); PROGMEM Language_Str MSG_BED_TRAMMING_GOOD_POINTS = _UxGT("Jó pontok: "); @@ -582,12 +582,12 @@ namespace Language_hu { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Max höfok"); PROGMEM Language_Str MSG_INFO_PSU = _UxGT("PSU"); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Meghajtási erö"); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X meghajtó %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y meghajtó %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z meghajtó %"); - PROGMEM Language_Str MSG_DAC_PERCENT_I = AXIS4_STR _UxGT(" Meghajtó %"); - PROGMEM Language_Str MSG_DAC_PERCENT_J = AXIS5_STR _UxGT(" Meghajtó %"); - PROGMEM Language_Str MSG_DAC_PERCENT_K = AXIS6_STR _UxGT(" Meghajtó %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" Meghajtó %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" Meghajtó %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" Meghajtó %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" Meghajtó %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" Meghajtó %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" Meghajtó %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E meghajtó %"); PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("TMC CSATLAKOZÁSI HIBA"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC EEPROM írása"); diff --git a/Marlin/src/lcd/language/language_it.h b/Marlin/src/lcd/language/language_it.h index 32bc7ff7c708..4ae85e7bbe16 100644 --- a/Marlin/src/lcd/language/language_it.h +++ b/Marlin/src/lcd/language/language_it.h @@ -346,14 +346,14 @@ namespace Language_it { PROGMEM Language_Str MSG_VMIN = _UxGT("Vmin"); PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("VTrav min"); PROGMEM Language_Str MSG_ACCELERATION = _UxGT("Accelerazione"); - PROGMEM Language_Str MSG_AMAX_A = _UxGT("Amax ") LCD_STR_A; - PROGMEM Language_Str MSG_AMAX_B = _UxGT("Amax ") LCD_STR_B; - PROGMEM Language_Str MSG_AMAX_C = _UxGT("Amax ") LCD_STR_C; - PROGMEM Language_Str MSG_AMAX_I = _UxGT("Amax ") LCD_STR_I; - PROGMEM Language_Str MSG_AMAX_J = _UxGT("Amax ") LCD_STR_J; - PROGMEM Language_Str MSG_AMAX_K = _UxGT("Amax ") LCD_STR_K; - PROGMEM Language_Str MSG_AMAX_E = _UxGT("Amax ") LCD_STR_E; - PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Amax *"); + PROGMEM Language_Str MSG_AMAX_A = _UxGT("Max ") LCD_STR_A _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_B = _UxGT("Max ") LCD_STR_B _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_C = _UxGT("Max ") LCD_STR_C _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_I = _UxGT("Max ") LCD_STR_I _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_J = _UxGT("Max ") LCD_STR_J _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_K = _UxGT("Max ") LCD_STR_K _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_E = _UxGT("Max ") LCD_STR_E _UxGT(" Accel"); + PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Max * Accel"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-Ritrazione"); PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("A-Spostamento"); PROGMEM Language_Str MSG_XY_FREQUENCY_LIMIT = _UxGT("Frequenza max"); @@ -577,12 +577,12 @@ namespace Language_it { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Temp max"); PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Alimentatore"); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Potenza Drive"); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("Driver X %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Driver Y %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Driver Z %"); - PROGMEM Language_Str MSG_DAC_PERCENT_I = _UxGT("Driver ") AXIS4_STR _UxGT(" %"); - PROGMEM Language_Str MSG_DAC_PERCENT_J = _UxGT("Driver ") AXIS5_STR _UxGT(" %"); - PROGMEM Language_Str MSG_DAC_PERCENT_K = _UxGT("Driver ") AXIS6_STR _UxGT(" %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = _UxGT("Driver ") LCD_STR_A _UxGT(" %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = _UxGT("Driver ") LCD_STR_B _UxGT(" %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = _UxGT("Driver ") LCD_STR_C _UxGT(" %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = _UxGT("Driver ") LCD_STR_I _UxGT(" %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = _UxGT("Driver ") LCD_STR_J _UxGT(" %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = _UxGT("Driver ") LCD_STR_K _UxGT(" %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("Driver E %"); PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("ERR.CONNESSIONE TMC"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("Scrivi DAC EEPROM"); @@ -701,6 +701,9 @@ namespace Language_it { PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A; PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B; PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C; + PROGMEM Language_Str MSG_BACKLASH_I = LCD_STR_I; + PROGMEM Language_Str MSG_BACKLASH_J = LCD_STR_J; + PROGMEM Language_Str MSG_BACKLASH_K = LCD_STR_K; PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Correzione"); PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("Appianamento"); diff --git a/Marlin/src/lcd/language/language_jp_kana.h b/Marlin/src/lcd/language/language_jp_kana.h index 61740e3b40eb..c0fe2451b0af 100644 --- a/Marlin/src/lcd/language/language_jp_kana.h +++ b/Marlin/src/lcd/language/language_jp_kana.h @@ -119,14 +119,20 @@ namespace Language_jp_kana { PROGMEM Language_Str MSG_VA_JERK = _UxGT("ジク ヤクドウ mm/s") LCD_STR_A; // "Va-jerk" PROGMEM Language_Str MSG_VB_JERK = _UxGT("ジク ヤクドウ mm/s") LCD_STR_B; // "Vb-jerk" PROGMEM Language_Str MSG_VC_JERK = _UxGT("ジク ヤクドウ mm/s") LCD_STR_C; // "Vc-jerk" + PROGMEM Language_Str MSG_VI_JERK = _UxGT("ジク ヤクドウ mm/s") LCD_STR_I; // "Va-jerk" + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("ジク ヤクドウ mm/s") LCD_STR_J; // "Vb-jerk" + PROGMEM Language_Str MSG_VK_JERK = _UxGT("ジク ヤクドウ mm/s") LCD_STR_K; // "Vc-jerk" PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT("ステップ/mm"); PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT("ステップ/mm"); PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT("ステップ/mm"); PROGMEM Language_Str MSG_VE_JERK = _UxGT("エクストルーダー ヤクド"); // "Ve-jerk" PROGMEM Language_Str MSG_VMAX_A = _UxGT("サイダイオクリソクド ") LCD_STR_A; // "Vmax A" - PROGMEM Language_Str MSG_VMAX_B = _UxGT("サイダイオクリソクド ") LCD_STR_A; // "Vmax B" - PROGMEM Language_Str MSG_VMAX_C = _UxGT("サイダイオクリソクド ") LCD_STR_A; // "Vmax C" - PROGMEM Language_Str MSG_VMAX_E = _UxGT("サイダイオクリソクド ") LCD_STR_A; // "Vmax E" + PROGMEM Language_Str MSG_VMAX_B = _UxGT("サイダイオクリソクド ") LCD_STR_B; // "Vmax B" + PROGMEM Language_Str MSG_VMAX_C = _UxGT("サイダイオクリソクド ") LCD_STR_C; // "Vmax C" + PROGMEM Language_Str MSG_VMAX_I = _UxGT("サイダイオクリソクド ") LCD_STR_I; // "Vmax I" + PROGMEM Language_Str MSG_VMAX_J = _UxGT("サイダイオクリソクド ") LCD_STR_J; // "Vmax J" + PROGMEM Language_Str MSG_VMAX_K = _UxGT("サイダイオクリソクド ") LCD_STR_K; // "Vmax K" + PROGMEM Language_Str MSG_VMAX_E = _UxGT("サイダイオクリソクド ") LCD_STR_E; // "Vmax E" PROGMEM Language_Str MSG_VMAX_EN = _UxGT("サイダイオクリソクド *"); // "Vmax E1" PROGMEM Language_Str MSG_VMIN = _UxGT("サイショウオクリソクド"); // "Vmin" PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("サイショウイドウソクド"); // "VTrav min" @@ -214,9 +220,12 @@ namespace Language_jp_kana { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("セッテイサイコウオン"); // "Max Temp" PROGMEM Language_Str MSG_INFO_PSU = _UxGT("デンゲンシュベツ"); // "Power Supply" PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("モータークドウリョク"); // "Drive Strength" - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X DACシュツリョク %"); // "X Driver %" - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y DACシュツリョク %"); // "Y Driver %" - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z DACシュツリョク %"); // "Z Driver %" + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" DACシュツリョク %"); // "X Driver %" + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" DACシュツリョク %"); // "Y Driver %" + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" DACシュツリョク %"); // "Z Driver %" + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" DACシュツリョク %"); // "I Driver %" + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" DACシュツリョク %"); // "J Driver %" + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" DACシュツリョク %"); // "K Driver %" PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E DACシュツリョク %"); // "E Driver %" PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("EEPROMヘホゾン"); // "Store memory" PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("イチジテイシ"); diff --git a/Marlin/src/lcd/language/language_pl.h b/Marlin/src/lcd/language/language_pl.h index e467178f6a98..b55777717d37 100644 --- a/Marlin/src/lcd/language/language_pl.h +++ b/Marlin/src/lcd/language/language_pl.h @@ -327,22 +327,16 @@ namespace Language_pl { PROGMEM Language_Str MSG_VA_JERK = _UxGT("Zryw V") LCD_STR_A; PROGMEM Language_Str MSG_VB_JERK = _UxGT("Zryw V") LCD_STR_B; PROGMEM Language_Str MSG_VC_JERK = _UxGT("Zryw V") LCD_STR_C; + PROGMEM Language_Str MSG_VI_JERK = _UxGT("Zryw V") LCD_STR_I; + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("Zryw V") LCD_STR_J; + PROGMEM Language_Str MSG_VK_JERK = _UxGT("Zryw V") LCD_STR_K; PROGMEM Language_Str MSG_VE_JERK = _UxGT("Zryw Ve"); //PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Junction Dev"); PROGMEM Language_Str MSG_VELOCITY = _UxGT("Prędkość (V)"); - //PROGMEM Language_Str MSG_VMAX_A = _UxGT("Vmax ") LCD_STR_A; - //PROGMEM Language_Str MSG_VMAX_B = _UxGT("Vmax ") LCD_STR_B; - //PROGMEM Language_Str MSG_VMAX_C = _UxGT("Vmax ") LCD_STR_C; - //PROGMEM Language_Str MSG_VMAX_E = _UxGT("Vmax ") LCD_STR_E; - //PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Vmax *"); - //PROGMEM Language_Str MSG_VMIN = _UxGT("Vmin"); + PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("Vskok min"); PROGMEM Language_Str MSG_ACCELERATION = _UxGT("Przyspieszenie (A)"); - //PROGMEM Language_Str MSG_AMAX_A = _UxGT("Amax ") LCD_STR_A; - //PROGMEM Language_Str MSG_AMAX_B = _UxGT("Amax ") LCD_STR_B; - //PROGMEM Language_Str MSG_AMAX_C = _UxGT("Amax ") LCD_STR_C; - //PROGMEM Language_Str MSG_AMAX_E = _UxGT("Amax ") LCD_STR_E; - //PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Amax *"); + PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-wycofanie"); PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("A-przesuń."); PROGMEM Language_Str MSG_XY_FREQUENCY_LIMIT = _UxGT("Częstotliwość max"); @@ -351,6 +345,9 @@ namespace Language_pl { PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" kroki/mm"); PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" kroki/mm"); PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" kroki/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" kroki/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" kroki/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" kroki/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("E kroki/mm"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("* kroki/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperatura"); @@ -561,9 +558,12 @@ namespace Language_pl { //PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Max Temp"); PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Zasilacz"); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Siła silnika"); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Siła %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Siła %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Siła %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" Siła %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" Siła %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" Siła %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" Siła %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" Siła %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" Siła %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E Siła %"); PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("TMC BŁĄD POŁĄCZENIA"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("Zapisz DAC EEPROM"); @@ -678,9 +678,6 @@ namespace Language_pl { //PROGMEM Language_Str MSG_SERVICE_RESET = _UxGT("Reset"); //PROGMEM Language_Str MSG_SERVICE_IN = _UxGT(" in:"); //PROGMEM Language_Str MSG_BACKLASH = _UxGT("Backlash"); - //PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A; - //PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B; - //PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C; PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Korekcja"); PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("Wygładzanie"); diff --git a/Marlin/src/lcd/language/language_pt.h b/Marlin/src/lcd/language/language_pt.h index 4bec74558e80..630f38e2d930 100644 --- a/Marlin/src/lcd/language/language_pt.h +++ b/Marlin/src/lcd/language/language_pt.h @@ -105,6 +105,9 @@ namespace Language_pt { PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" passo/mm"); PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" passo/mm"); PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" passo/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" passo/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" passo/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" passo/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("E passo/mm"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("* passo/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperatura"); diff --git a/Marlin/src/lcd/language/language_pt_br.h b/Marlin/src/lcd/language/language_pt_br.h index 12904aa7ea79..4b52ee97b806 100644 --- a/Marlin/src/lcd/language/language_pt_br.h +++ b/Marlin/src/lcd/language/language_pt_br.h @@ -244,6 +244,9 @@ namespace Language_pt_br { PROGMEM Language_Str MSG_VA_JERK = _UxGT("arrancada V") LCD_STR_A; PROGMEM Language_Str MSG_VB_JERK = _UxGT("arrancada V") LCD_STR_B; PROGMEM Language_Str MSG_VC_JERK = _UxGT("arrancada V") LCD_STR_C; + PROGMEM Language_Str MSG_VI_JERK = _UxGT("arrancada V") LCD_STR_I; + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("arrancada V") LCD_STR_J; + PROGMEM Language_Str MSG_VK_JERK = _UxGT("arrancada V") LCD_STR_K; PROGMEM Language_Str MSG_VE_JERK = _UxGT("arrancada VE"); PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Desv. Junção"); PROGMEM Language_Str MSG_VELOCITY = _UxGT("Velocidade"); @@ -255,6 +258,9 @@ namespace Language_pt_br { PROGMEM Language_Str MSG_A_STEPS = _UxGT("Passo ") LCD_STR_A _UxGT("/mm"); PROGMEM Language_Str MSG_B_STEPS = _UxGT("Passo ") LCD_STR_B _UxGT("/mm"); PROGMEM Language_Str MSG_C_STEPS = _UxGT("Passo ") LCD_STR_C _UxGT("/mm"); + PROGMEM Language_Str MSG_I_STEPS = _UxGT("Passo ") LCD_STR_I _UxGT("/mm"); + PROGMEM Language_Str MSG_J_STEPS = _UxGT("Passo ") LCD_STR_J _UxGT("/mm"); + PROGMEM Language_Str MSG_K_STEPS = _UxGT("Passo ") LCD_STR_K _UxGT("/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("E/mm"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("*/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperatura"); diff --git a/Marlin/src/lcd/language/language_ro.h b/Marlin/src/lcd/language/language_ro.h index 3d21e1a58d7a..aedc8c417332 100644 --- a/Marlin/src/lcd/language/language_ro.h +++ b/Marlin/src/lcd/language/language_ro.h @@ -273,12 +273,18 @@ namespace Language_ro { PROGMEM Language_Str MSG_VA_JERK = _UxGT("V") LCD_STR_A _UxGT("-Jerk"); PROGMEM Language_Str MSG_VB_JERK = _UxGT("V") LCD_STR_B _UxGT("-Jerk"); PROGMEM Language_Str MSG_VC_JERK = _UxGT("V") LCD_STR_C _UxGT("-Jerk"); + PROGMEM Language_Str MSG_VI_JERK = _UxGT("V") LCD_STR_I _UxGT("-Jerk"); + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("V") LCD_STR_J _UxGT("-Jerk"); + PROGMEM Language_Str MSG_VK_JERK = _UxGT("V") LCD_STR_K _UxGT("-Jerk"); PROGMEM Language_Str MSG_VE_JERK = _UxGT("Ve-Jerk"); PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Junction Dev"); PROGMEM Language_Str MSG_VELOCITY = _UxGT("Velocity"); PROGMEM Language_Str MSG_VMAX_A = _UxGT("Vmax ") LCD_STR_A; PROGMEM Language_Str MSG_VMAX_B = _UxGT("Vmax ") LCD_STR_B; PROGMEM Language_Str MSG_VMAX_C = _UxGT("Vmax ") LCD_STR_C; + PROGMEM Language_Str MSG_VMAX_I = _UxGT("Vmax ") LCD_STR_I; + PROGMEM Language_Str MSG_VMAX_J = _UxGT("Vmax ") LCD_STR_J; + PROGMEM Language_Str MSG_VMAX_K = _UxGT("Vmax ") LCD_STR_K; PROGMEM Language_Str MSG_VMAX_E = _UxGT("Vmax ") LCD_STR_E; PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Vmax *"); PROGMEM Language_Str MSG_VMIN = _UxGT("Vmin"); @@ -287,6 +293,9 @@ namespace Language_ro { PROGMEM Language_Str MSG_AMAX_A = _UxGT("Amax ") LCD_STR_A; PROGMEM Language_Str MSG_AMAX_B = _UxGT("Amax ") LCD_STR_B; PROGMEM Language_Str MSG_AMAX_C = _UxGT("Amax ") LCD_STR_C; + PROGMEM Language_Str MSG_AMAX_I = _UxGT("Amax ") LCD_STR_I; + PROGMEM Language_Str MSG_AMAX_J = _UxGT("Amax ") LCD_STR_J; + PROGMEM Language_Str MSG_AMAX_K = _UxGT("Amax ") LCD_STR_K; PROGMEM Language_Str MSG_AMAX_E = _UxGT("Amax ") LCD_STR_E; PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Amax *"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-Retract"); @@ -294,9 +303,12 @@ namespace Language_ro { PROGMEM Language_Str MSG_XY_FREQUENCY_LIMIT = _UxGT("Frequency max"); PROGMEM Language_Str MSG_XY_FREQUENCY_FEEDRATE = _UxGT("Feed min"); PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("Steps/mm"); - PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT("steps/mm"); - PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT("steps/mm"); - PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT("steps/mm"); + PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" steps/mm"); + PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" steps/mm"); + PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" steps/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" steps/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" steps/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" steps/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("Esteps/mm"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("*steps/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperature"); @@ -497,9 +509,12 @@ namespace Language_ro { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Temperatura Maxima"); PROGMEM Language_Str MSG_INFO_PSU = _UxGT("PSU"); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Drive Strength"); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" Driver %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E Driver %"); PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("TMC CONNECTION ERROR"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC EEPROM Write"); @@ -606,6 +621,9 @@ namespace Language_ro { PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A; PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B; PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C; + PROGMEM Language_Str MSG_BACKLASH_I = LCD_STR_I; + PROGMEM Language_Str MSG_BACKLASH_J = LCD_STR_J; + PROGMEM Language_Str MSG_BACKLASH_K = LCD_STR_K; PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Corectare"); PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("Smoothing"); diff --git a/Marlin/src/lcd/language/language_ru.h b/Marlin/src/lcd/language/language_ru.h index 6ccfe5f47a12..e7eab72f6c4c 100644 --- a/Marlin/src/lcd/language/language_ru.h +++ b/Marlin/src/lcd/language/language_ru.h @@ -714,9 +714,9 @@ namespace Language_ru { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Макс. ") LCD_STR_THERMOMETER; PROGMEM Language_Str MSG_INFO_PSU = _UxGT("БП"); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Сила привода"); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Привод, %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Привод, %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Привод, %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" Привод, %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" Привод, %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" Привод, %"); PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" Привод, %"); PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" Привод, %"); PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" Привод, %"); diff --git a/Marlin/src/lcd/language/language_sk.h b/Marlin/src/lcd/language/language_sk.h index 717fa49b3375..079bcf55c813 100644 --- a/Marlin/src/lcd/language/language_sk.h +++ b/Marlin/src/lcd/language/language_sk.h @@ -132,7 +132,7 @@ namespace Language_sk { PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("Posunúť osy"); PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("Vyrovnanie podložky"); PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("Vyrovnať podložku"); - PROGMEM Language_Str MSG_BED_TRAMMING = _UxGT("Asist. vyrovnanie"); + PROGMEM Language_Str MSG_BED_TRAMMING = _UxGT("Vyrovnať rohy"); PROGMEM Language_Str MSG_BED_TRAMMING_RAISE = _UxGT("Zdvyhnite podl., kým sa nezopne sonda"); PROGMEM Language_Str MSG_BED_TRAMMING_IN_RANGE = _UxGT("Rohy sú vrámci odchyl. Vyrovnajte podl."); PROGMEM Language_Str MSG_BED_TRAMMING_GOOD_POINTS = _UxGT("Dobré body: "); @@ -319,12 +319,18 @@ namespace Language_sk { PROGMEM Language_Str MSG_VA_JERK = _UxGT("V") LCD_STR_A _UxGT("-skok"); PROGMEM Language_Str MSG_VB_JERK = _UxGT("V") LCD_STR_B _UxGT("-skok"); PROGMEM Language_Str MSG_VC_JERK = _UxGT("V") LCD_STR_C _UxGT("-skok"); + PROGMEM Language_Str MSG_VI_JERK = _UxGT("V") LCD_STR_I _UxGT("-skok"); + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("V") LCD_STR_J _UxGT("-skok"); + PROGMEM Language_Str MSG_VK_JERK = _UxGT("V") LCD_STR_K _UxGT("-skok"); PROGMEM Language_Str MSG_VE_JERK = _UxGT("Ve-skok"); PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Junction Dev"); PROGMEM Language_Str MSG_VELOCITY = _UxGT("Rýchlosť"); PROGMEM Language_Str MSG_VMAX_A = _UxGT("Vmax ") LCD_STR_A; PROGMEM Language_Str MSG_VMAX_B = _UxGT("Vmax ") LCD_STR_B; PROGMEM Language_Str MSG_VMAX_C = _UxGT("Vmax ") LCD_STR_C; + PROGMEM Language_Str MSG_VMAX_I = _UxGT("Vmax ") LCD_STR_I; + PROGMEM Language_Str MSG_VMAX_J = _UxGT("Vmax ") LCD_STR_J; + PROGMEM Language_Str MSG_VMAX_K = _UxGT("Vmax ") LCD_STR_K; PROGMEM Language_Str MSG_VMAX_E = _UxGT("Vmax ") LCD_STR_E; PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Vmax *"); PROGMEM Language_Str MSG_VMIN = _UxGT("Vmin"); @@ -333,6 +339,9 @@ namespace Language_sk { PROGMEM Language_Str MSG_AMAX_A = _UxGT("Amax ") LCD_STR_A; PROGMEM Language_Str MSG_AMAX_B = _UxGT("Amax ") LCD_STR_B; PROGMEM Language_Str MSG_AMAX_C = _UxGT("Amax ") LCD_STR_C; + PROGMEM Language_Str MSG_AMAX_I = _UxGT("Amax ") LCD_STR_I; + PROGMEM Language_Str MSG_AMAX_J = _UxGT("Amax ") LCD_STR_J; + PROGMEM Language_Str MSG_AMAX_K = _UxGT("Amax ") LCD_STR_K; PROGMEM Language_Str MSG_AMAX_E = _UxGT("Amax ") LCD_STR_E; PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Amax *"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-retrakt"); @@ -340,9 +349,12 @@ namespace Language_sk { PROGMEM Language_Str MSG_XY_FREQUENCY_LIMIT = _UxGT("Max. frekvencia"); PROGMEM Language_Str MSG_XY_FREQUENCY_FEEDRATE = _UxGT("Min. posun"); PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("Kroky/mm"); - PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT("krokov/mm"); - PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT("krokov/mm"); - PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT("krokov/mm"); + PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" krokov/mm"); + PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" krokov/mm"); + PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" krokov/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" krokov/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" krokov/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" krokov/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("Ekrokov/mm"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("*krokov/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Teplota"); @@ -553,9 +565,12 @@ namespace Language_sk { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Teplota max"); PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Nap. zdroj"); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Budenie motorov"); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Motor %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Motor %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Motor %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" Motor %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" Motor %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" Motor %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" Motor %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" Motor %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" Motor %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E Motor %"); PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("CHYBA KOMUNIKÁ. TMC"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("Uložiť do EEPROM"); @@ -673,6 +688,9 @@ namespace Language_sk { PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A; PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B; PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C; + PROGMEM Language_Str MSG_BACKLASH_I = LCD_STR_I; + PROGMEM Language_Str MSG_BACKLASH_J = LCD_STR_J; + PROGMEM Language_Str MSG_BACKLASH_K = LCD_STR_K; PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Korekcia"); PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("Vyhladzovanie"); diff --git a/Marlin/src/lcd/language/language_sv.h b/Marlin/src/lcd/language/language_sv.h index baa0f645062c..cb33db5dfdff 100644 --- a/Marlin/src/lcd/language/language_sv.h +++ b/Marlin/src/lcd/language/language_sv.h @@ -303,12 +303,18 @@ namespace Language_sv { PROGMEM Language_Str MSG_VA_JERK = _UxGT("V") LCD_STR_A _UxGT("-Ryck"); PROGMEM Language_Str MSG_VB_JERK = _UxGT("V") LCD_STR_B _UxGT("-Ryck"); PROGMEM Language_Str MSG_VC_JERK = _UxGT("V") LCD_STR_C _UxGT("-Ryck"); + PROGMEM Language_Str MSG_VI_JERK = _UxGT("V") LCD_STR_I _UxGT("-Ryck"); + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("V") LCD_STR_J _UxGT("-Ryck"); + PROGMEM Language_Str MSG_VK_JERK = _UxGT("V") LCD_STR_K _UxGT("-Ryck"); PROGMEM Language_Str MSG_VE_JERK = _UxGT("Ve-Ryck"); PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Knutpunkt Avv"); PROGMEM Language_Str MSG_VELOCITY = _UxGT("Hastighet"); PROGMEM Language_Str MSG_VMAX_A = _UxGT("Vmax ") LCD_STR_A; PROGMEM Language_Str MSG_VMAX_B = _UxGT("Vmax ") LCD_STR_B; PROGMEM Language_Str MSG_VMAX_C = _UxGT("Vmax ") LCD_STR_C; + PROGMEM Language_Str MSG_VMAX_I = _UxGT("Vmax ") LCD_STR_I; + PROGMEM Language_Str MSG_VMAX_J = _UxGT("Vmax ") LCD_STR_J; + PROGMEM Language_Str MSG_VMAX_K = _UxGT("Vmax ") LCD_STR_K; PROGMEM Language_Str MSG_VMAX_E = _UxGT("Vmax ") LCD_STR_E; PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Vmax *"); PROGMEM Language_Str MSG_VMIN = _UxGT("Vmin"); @@ -317,6 +323,9 @@ namespace Language_sv { PROGMEM Language_Str MSG_AMAX_A = _UxGT("Amax ") LCD_STR_A; PROGMEM Language_Str MSG_AMAX_B = _UxGT("Amax ") LCD_STR_B; PROGMEM Language_Str MSG_AMAX_C = _UxGT("Amax ") LCD_STR_C; + PROGMEM Language_Str MSG_AMAX_I = _UxGT("Amax ") LCD_STR_I; + PROGMEM Language_Str MSG_AMAX_J = _UxGT("Amax ") LCD_STR_J; + PROGMEM Language_Str MSG_AMAX_K = _UxGT("Amax ") LCD_STR_K; PROGMEM Language_Str MSG_AMAX_E = _UxGT("Amax ") LCD_STR_E; PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Amax *"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-Dra tillbaka"); @@ -327,6 +336,9 @@ namespace Language_sv { PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" Steg/mm"); PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" Steg/mm"); PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" Steg/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" Steg/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" Steg/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" Steg/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("E Steg/mm"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("* Steg/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperatur"); @@ -533,9 +545,12 @@ namespace Language_sv { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Max Temp"); PROGMEM Language_Str MSG_INFO_PSU = _UxGT("PSU"); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Driv Styrka"); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" Driver %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E Driver %"); PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("TMC KOPPLNINGSFEL"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC EEPROM Skriv"); @@ -653,6 +668,9 @@ namespace Language_sv { PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A; PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B; PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C; + PROGMEM Language_Str MSG_BACKLASH_I = LCD_STR_I; + PROGMEM Language_Str MSG_BACKLASH_J = LCD_STR_J; + PROGMEM Language_Str MSG_BACKLASH_K = LCD_STR_K; PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Korrigering"); PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("Glättning"); diff --git a/Marlin/src/lcd/language/language_tr.h b/Marlin/src/lcd/language/language_tr.h index bf218f136fac..66c7c1c1a26a 100644 --- a/Marlin/src/lcd/language/language_tr.h +++ b/Marlin/src/lcd/language/language_tr.h @@ -266,12 +266,18 @@ namespace Language_tr { PROGMEM Language_Str MSG_VA_JERK = _UxGT("V") LCD_STR_A _UxGT("-Sarsım"); PROGMEM Language_Str MSG_VB_JERK = _UxGT("V") LCD_STR_B _UxGT("-Sarsım"); PROGMEM Language_Str MSG_VC_JERK = _UxGT("V") LCD_STR_C _UxGT("-Sarsım"); + PROGMEM Language_Str MSG_VI_JERK = _UxGT("V") LCD_STR_I _UxGT("-Sarsım"); + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("V") LCD_STR_J _UxGT("-Sarsım"); + PROGMEM Language_Str MSG_VK_JERK = _UxGT("V") LCD_STR_K _UxGT("-Sarsım"); PROGMEM Language_Str MSG_VE_JERK = _UxGT("Ve-Sarsım"); PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Jonksiyon Sapması"); PROGMEM Language_Str MSG_VELOCITY = _UxGT("Hız Vektörü"); PROGMEM Language_Str MSG_VMAX_A = _UxGT("HızVektör.max ") LCD_STR_A; PROGMEM Language_Str MSG_VMAX_B = _UxGT("HızVektör.max ") LCD_STR_B; PROGMEM Language_Str MSG_VMAX_C = _UxGT("HızVektör.max ") LCD_STR_C; + PROGMEM Language_Str MSG_VMAX_I = _UxGT("HızVektör.max ") LCD_STR_I; + PROGMEM Language_Str MSG_VMAX_J = _UxGT("HızVektör.max ") LCD_STR_J; + PROGMEM Language_Str MSG_VMAX_K = _UxGT("HızVektör.max ") LCD_STR_K; PROGMEM Language_Str MSG_VMAX_E = _UxGT("HızVektör.max ") LCD_STR_E; PROGMEM Language_Str MSG_VMAX_EN = _UxGT("HızVektör.max *"); PROGMEM Language_Str MSG_VMIN = _UxGT("HızVektör.min"); @@ -280,6 +286,9 @@ namespace Language_tr { PROGMEM Language_Str MSG_AMAX_A = _UxGT("Max. ivme ") LCD_STR_A; PROGMEM Language_Str MSG_AMAX_B = _UxGT("Max. ivme ") LCD_STR_B; PROGMEM Language_Str MSG_AMAX_C = _UxGT("Max. ivme ") LCD_STR_C; + PROGMEM Language_Str MSG_AMAX_I = _UxGT("Max. ivme ") LCD_STR_I; + PROGMEM Language_Str MSG_AMAX_J = _UxGT("Max. ivme ") LCD_STR_J; + PROGMEM Language_Str MSG_AMAX_K = _UxGT("Max. ivme ") LCD_STR_K; PROGMEM Language_Str MSG_AMAX_E = _UxGT("Max. ivme ") LCD_STR_E; PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Max. ivme *"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("Ivme-geri çekme"); @@ -288,6 +297,9 @@ namespace Language_tr { PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" adım/mm"); PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" adım/mm"); PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" adım/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" adım/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" adım/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" adım/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("E adım/mm"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("* adım/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Sıcaklık"); @@ -464,9 +476,12 @@ namespace Language_tr { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Max Sıc."); PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Güç Kaynağı"); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Sürücü Gücü"); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Sürücü %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Sürücü %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Sürücü %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" Sürücü %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" Sürücü %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" Sürücü %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" Sürücü %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" Sürücü %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" Sürücü %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E Sürücü %"); PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("TMC BAĞLANTI HATASI"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC EEPROM Yaz"); @@ -571,6 +586,9 @@ namespace Language_tr { PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A; PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B; PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C; + PROGMEM Language_Str MSG_BACKLASH_I = LCD_STR_I; + PROGMEM Language_Str MSG_BACKLASH_J = LCD_STR_J; + PROGMEM Language_Str MSG_BACKLASH_K = LCD_STR_K; PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Düzeltme"); PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("Yumuşatma"); } diff --git a/Marlin/src/lcd/language/language_uk.h b/Marlin/src/lcd/language/language_uk.h index 2e4a1b068caf..e0ee2e39294d 100644 --- a/Marlin/src/lcd/language/language_uk.h +++ b/Marlin/src/lcd/language/language_uk.h @@ -719,12 +719,12 @@ namespace Language_uk { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Макс. ") LCD_STR_THERMOMETER; PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Блок жив-ня"); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Сила мотору"); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("Драйвер X, %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Драйвер Y, %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Драйвер Z, %"); - PROGMEM Language_Str MSG_DAC_PERCENT_I = _UxGT("Драйвер ") AXIS4_STR _UxGT(", %"); - PROGMEM Language_Str MSG_DAC_PERCENT_J = _UxGT("Драйвер ") AXIS5_STR _UxGT(", %"); - PROGMEM Language_Str MSG_DAC_PERCENT_K = _UxGT("Драйвер ") AXIS6_STR _UxGT(", %"); + PROGMEM Language_Str MSG_DAC_PERCENT_A = _UxGT("Драйвер ") LCD_STR_A _UxGT(", %"); + PROGMEM Language_Str MSG_DAC_PERCENT_B = _UxGT("Драйвер ") LCD_STR_B _UxGT(", %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = _UxGT("Драйвер ") LCD_STR_C _UxGT(", %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = _UxGT("Драйвер ") LCD_STR_I _UxGT(", %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = _UxGT("Драйвер ") LCD_STR_J _UxGT(", %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = _UxGT("Драйвер ") LCD_STR_K _UxGT(", %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("Драйвер E, %"); PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("ЗБІЙ ЗВ'ЯЗКУ З TMC"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("Запис ЦАП у EEPROM"); diff --git a/Marlin/src/lcd/language/language_vi.h b/Marlin/src/lcd/language/language_vi.h index 013a9159214a..9ee93a56bbd6 100644 --- a/Marlin/src/lcd/language/language_vi.h +++ b/Marlin/src/lcd/language/language_vi.h @@ -52,9 +52,9 @@ namespace Language_vi { PROGMEM Language_Str MSG_DEBUG_MENU = _UxGT("Menu gỡ lỗi"); // Debug Menu PROGMEM Language_Str MSG_PROGRESS_BAR_TEST = _UxGT("Kiểm tra tiến độ"); // Progress bar test PROGMEM Language_Str MSG_AUTO_HOME = _UxGT("Về nhà tự động"); // Auto home - PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT("Về nhà X"); // home x - PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT("Về nhà Y"); // home y - PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT("Về nhà Z"); + PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT("Về nhà X"); // home X + PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT("Về nhà Y"); // home Y + PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT("Về nhà Z"); // home Z PROGMEM Language_Str MSG_AUTO_Z_ALIGN = _UxGT("Chỉnh canh Z tự động"); PROGMEM Language_Str MSG_LEVEL_BED_HOMING = _UxGT("Đang về nhà XYZ"); // Homing XYZ PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("Nhấn để bắt đầu"); // Click to Begin @@ -160,7 +160,7 @@ namespace Language_vi { PROGMEM Language_Str MSG_UBL_STORAGE_SLOT = _UxGT("Khe nhớ"); // Memory Slot PROGMEM Language_Str MSG_UBL_LOAD_MESH = _UxGT("Tải lưới bàn"); // Load Bed Mesh PROGMEM Language_Str MSG_UBL_SAVE_MESH = _UxGT("Lưu lưới bàn"); // Save Bed Mesh - PROGMEM Language_Str MSG_MESH_LOADED = _UxGT("%i lưới được nạp"); // Mesh %i loaded + PROGMEM Language_Str MSG_MESH_LOADED = _UxGT("%i lưới được nạp"); // Mesh %i loaded PROGMEM Language_Str MSG_MESH_SAVED = _UxGT("%i lưới đã lưu"); PROGMEM Language_Str MSG_NO_STORAGE = _UxGT("Không lưu trữ"); // No Storage PROGMEM Language_Str MSG_UBL_SAVE_ERROR = _UxGT("Điều sai: Lưu UBL"); // Err: UBL Save @@ -200,7 +200,7 @@ namespace Language_vi { PROGMEM Language_Str MSG_MOVE_Y = _UxGT("Di chuyển Y"); PROGMEM Language_Str MSG_MOVE_Z = _UxGT("Di chuyển Z"); PROGMEM Language_Str MSG_MOVE_E = _UxGT("Máy đùn"); // Extruder - PROGMEM Language_Str MSG_MOVE_EN = _UxGT("Máy đùn *"); // Extruder + PROGMEM Language_Str MSG_MOVE_EN = _UxGT("Máy đùn *"); PROGMEM Language_Str MSG_HOTEND_TOO_COLD = _UxGT("Đầu nóng quá lạnh"); // Hotend too cold PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("Di chuyển 0.1mm"); // Move 0.1mm PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("Di chuyển 1mm"); // Move 1mm @@ -209,12 +209,12 @@ namespace Language_vi { PROGMEM Language_Str MSG_SPEED = _UxGT("Tốc độ"); // Speed PROGMEM Language_Str MSG_BED_Z = _UxGT("Z Bàn"); PROGMEM Language_Str MSG_NOZZLE = _UxGT("Đầu phun"); // Nozzle - PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Đầu phun ~"); // Nozzle + PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Đầu phun ~"); PROGMEM Language_Str MSG_BED = _UxGT("Bàn"); // bed PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Tốc độ quạt"); // fan speed - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Tốc độ quạt ~"); // fan speed + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Tốc độ quạt ~"); PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Tốc độ quạt phụ"); // Extra fan speed - PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Tốc độ quạt phụ ~"); // Extra fan speed + PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Tốc độ quạt phụ ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("Lưu Lượng"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("Lưu Lượng ~"); PROGMEM Language_Str MSG_CONTROL = _UxGT("Điều khiển"); // Control @@ -231,28 +231,40 @@ namespace Language_vi { PROGMEM Language_Str MSG_VA_JERK = _UxGT("Giật-V") LCD_STR_A; PROGMEM Language_Str MSG_VB_JERK = _UxGT("Giật-V") LCD_STR_B; PROGMEM Language_Str MSG_VC_JERK = _UxGT("Giật-V") LCD_STR_C; + PROGMEM Language_Str MSG_VI_JERK = _UxGT("Giật-V") LCD_STR_I; + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("Giật-V") LCD_STR_J; + PROGMEM Language_Str MSG_VK_JERK = _UxGT("Giật-V") LCD_STR_K; PROGMEM Language_Str MSG_VE_JERK = _UxGT("Giật-Ve"); PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Độ Lệch Chỗ Giao"); // Junction Dev PROGMEM Language_Str MSG_VELOCITY = _UxGT("Vận tốc"); // velocity PROGMEM Language_Str MSG_VMAX_A = _UxGT("Vđa") LCD_STR_A; // Vmax - PROGMEM Language_Str MSG_VMAX_B = _UxGT("Vđa") LCD_STR_B; // Vmax - PROGMEM Language_Str MSG_VMAX_C = _UxGT("Vđa") LCD_STR_C; // Vmax - PROGMEM Language_Str MSG_VMAX_E = _UxGT("Vđa") LCD_STR_E; // Vmax - PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Vđa *"); // Vmax + PROGMEM Language_Str MSG_VMAX_B = _UxGT("Vđa") LCD_STR_B; + PROGMEM Language_Str MSG_VMAX_C = _UxGT("Vđa") LCD_STR_C; + PROGMEM Language_Str MSG_VMAX_I = _UxGT("Vđa") LCD_STR_I; + PROGMEM Language_Str MSG_VMAX_J = _UxGT("Vđa") LCD_STR_J; + PROGMEM Language_Str MSG_VMAX_K = _UxGT("Vđa") LCD_STR_K; + PROGMEM Language_Str MSG_VMAX_E = _UxGT("Vđa") LCD_STR_E; + PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Vđa *"); PROGMEM Language_Str MSG_VMIN = _UxGT("Vthiểu"); // Vmin PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("Vchuyển thiểu"); // VTrav min PROGMEM Language_Str MSG_ACCELERATION = _UxGT("Sự tăng tốc"); // Acceleration PROGMEM Language_Str MSG_AMAX_A = _UxGT("Tăng tốc ca") LCD_STR_A; // Amax - PROGMEM Language_Str MSG_AMAX_B = _UxGT("Tăng tốc ca") LCD_STR_B; // Amax - PROGMEM Language_Str MSG_AMAX_C = _UxGT("Tăng tốc ca") LCD_STR_C; // Amax - PROGMEM Language_Str MSG_AMAX_E = _UxGT("Tăng tốc ca") LCD_STR_E; // Amax - PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Tăng tốc ca *"); // Amax + PROGMEM Language_Str MSG_AMAX_B = _UxGT("Tăng tốc ca") LCD_STR_B; + PROGMEM Language_Str MSG_AMAX_C = _UxGT("Tăng tốc ca") LCD_STR_C; + PROGMEM Language_Str MSG_AMAX_I = _UxGT("Tăng tốc ca") LCD_STR_I; // Amax + PROGMEM Language_Str MSG_AMAX_J = _UxGT("Tăng tốc ca") LCD_STR_J; + PROGMEM Language_Str MSG_AMAX_K = _UxGT("Tăng tốc ca") LCD_STR_K; + PROGMEM Language_Str MSG_AMAX_E = _UxGT("Tăng tốc ca") LCD_STR_E; + PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Tăng tốc ca *"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("TT-Rút"); // A-retract PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("TT-Chuyển"); // A-travel PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("Bước/mm"); // Steps - PROGMEM Language_Str MSG_A_STEPS = _UxGT("Bước") LCD_STR_A _UxGT("/mm"); // Asteps/mm + PROGMEM Language_Str MSG_A_STEPS = _UxGT("Bước") LCD_STR_A _UxGT("/mm"); // Steps/mm PROGMEM Language_Str MSG_B_STEPS = _UxGT("Bước") LCD_STR_B _UxGT("/mm"); PROGMEM Language_Str MSG_C_STEPS = _UxGT("Bước") LCD_STR_C _UxGT("/mm"); + PROGMEM Language_Str MSG_I_STEPS = _UxGT("Bước") LCD_STR_I _UxGT("/mm"); // Steps/mm + PROGMEM Language_Str MSG_J_STEPS = _UxGT("Bước") LCD_STR_J _UxGT("/mm"); + PROGMEM Language_Str MSG_K_STEPS = _UxGT("Bước") LCD_STR_K _UxGT("/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("BướcE/mm"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("Bước */mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Nhiệt độ"); // Temperature @@ -388,10 +400,13 @@ namespace Language_vi { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Nhiệt độ tối đa"); // Max temp PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Bộ nguồn"); // PSU PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Sức mạnh ổ đĩa"); // Drive Strength - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X % trình điều khiển"); // X Driver % - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y % trình điều khiển"); // Y Driver % - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z % trình điều khiển"); // Z Driver % - PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E % trình điều khiển"); // E Driver % + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" % trình điều khiển"); // X Driver % + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" % trình điều khiển"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" % trình điều khiển"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" % trình điều khiển"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" % trình điều khiển"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" % trình điều khiển"); + PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E % trình điều khiển"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("Ghi DAC EEPROM"); // DAC EEPROM Write PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("In tạm dừng"); // PRINT PAUSED PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("Nạp dây nhựa"); diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h index 31d262360489..d3883ac88ddc 100644 --- a/Marlin/src/lcd/language/language_zh_CN.h +++ b/Marlin/src/lcd/language/language_zh_CN.h @@ -33,52 +33,52 @@ namespace Language_zh_CN { constexpr uint8_t CHARSIZE = 3; PROGMEM Language_Str LANGUAGE = _UxGT("Simplified Chinese"); - PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT("已就绪."); //" ready." + PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT("已就绪."); // " ready." PROGMEM Language_Str MSG_MARLIN = _UxGT("马林"); PROGMEM Language_Str MSG_YES = _UxGT("是"); PROGMEM Language_Str MSG_NO = _UxGT("否"); PROGMEM Language_Str MSG_BACK = _UxGT("返回"); // ”Back“ PROGMEM Language_Str MSG_MEDIA_ABORTING = _UxGT("放弃中..."); - PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("存储卡已插入"); //"Card inserted" - PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("存储卡被拔出"); //"Card removed" + PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("存储卡已插入"); // "Card inserted" + PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("存储卡被拔出"); // "Card removed" PROGMEM Language_Str MSG_MEDIA_WAITING = _UxGT("等待存储器"); PROGMEM Language_Str MSG_MEDIA_READ_ERROR = _UxGT("存储器读取错误"); PROGMEM Language_Str MSG_MEDIA_USB_REMOVED = _UxGT("USB设备已弹出"); PROGMEM Language_Str MSG_MEDIA_USB_FAILED = _UxGT("USB启动错误"); PROGMEM Language_Str MSG_KILL_SUBCALL_OVERFLOW = _UxGT("子响应溢出"); - PROGMEM Language_Str MSG_LCD_ENDSTOPS = _UxGT("挡块"); //"Endstops" // Max length 8 characters + PROGMEM Language_Str MSG_LCD_ENDSTOPS = _UxGT("挡块"); // "Endstops" // Max length 8 characters PROGMEM Language_Str MSG_LCD_SOFT_ENDSTOPS = _UxGT("软挡块"); - PROGMEM Language_Str MSG_MAIN = _UxGT("主菜单"); //"Main" + PROGMEM Language_Str MSG_MAIN = _UxGT("主菜单"); // "Main" PROGMEM Language_Str MSG_ADVANCED_SETTINGS = _UxGT("高级设置"); PROGMEM Language_Str MSG_CONFIGURATION = _UxGT("配置"); - PROGMEM Language_Str MSG_RUN_AUTO_FILES = _UxGT("自动开始"); //"Autostart" - PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT("关闭步进电机"); //"Disable steppers" + PROGMEM Language_Str MSG_RUN_AUTO_FILES = _UxGT("自动开始"); // "Autostart" + PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT("关闭步进电机"); // "Disable steppers" PROGMEM Language_Str MSG_DEBUG_MENU = _UxGT("调试菜单"); // "Debug Menu" PROGMEM Language_Str MSG_PROGRESS_BAR_TEST = _UxGT("进度条测试"); // "Progress Bar Test" - PROGMEM Language_Str MSG_AUTO_HOME = _UxGT("自动回原点"); //"Auto home" - PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT("回X原位"); //"Home X" - PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT("回Y原位"); //"Home Y" - PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT("回Z原位"); //"Home Z" + PROGMEM Language_Str MSG_AUTO_HOME = _UxGT("自动回原点"); // "Auto home" + PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT("回X原位"); // "Home X" + PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT("回Y原位"); // "Home Y" + PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT("回Z原位"); // "Home Z" PROGMEM Language_Str MSG_AUTO_Z_ALIGN = _UxGT("自动Z对齐"); - PROGMEM Language_Str MSG_LEVEL_BED_HOMING = _UxGT("平台调平XYZ归原位"); //"Homing XYZ" - PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("单击开始热床调平"); //"Click to Begin" - PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT("下个热床调平点"); //"Next Point" - PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT("完成热床调平"); //"Leveling Done!" + PROGMEM Language_Str MSG_LEVEL_BED_HOMING = _UxGT("平台调平XYZ归原位"); // "Homing XYZ" + PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("单击开始热床调平"); // "Click to Begin" + PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT("下个热床调平点"); // "Next Point" + PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT("完成热床调平"); // "Leveling Done!" PROGMEM Language_Str MSG_Z_FADE_HEIGHT = _UxGT("淡出高度"); // "Fade Height" - PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT("设置原点偏移"); //"Set home offsets" - PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("偏移已启用"); //"Offsets applied" - PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("设置原点"); //"Set origin" + PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT("设置原点偏移"); // "Set home offsets" + PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("偏移已启用"); // "Offsets applied" + PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("设置原点"); // "Set origin" #if PREHEAT_COUNT - PROGMEM Language_Str MSG_PREHEAT_1 = _UxGT("预热 ") PREHEAT_1_LABEL; //"Preheat PREHEAT_2_LABEL" - PROGMEM Language_Str MSG_PREHEAT_1_H = _UxGT("预热 ") PREHEAT_1_LABEL " ~"; //"Preheat PREHEAT_2_LABEL" + PROGMEM Language_Str MSG_PREHEAT_1 = _UxGT("预热 ") PREHEAT_1_LABEL; // "Preheat PREHEAT_2_LABEL" + PROGMEM Language_Str MSG_PREHEAT_1_H = _UxGT("预热 ") PREHEAT_1_LABEL " ~"; // "Preheat PREHEAT_2_LABEL" PROGMEM Language_Str MSG_PREHEAT_1_END = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 喷嘴"); //MSG_PREHEAT_1 " " PROGMEM Language_Str MSG_PREHEAT_1_END_E = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 喷嘴 ~"); //MSG_PREHEAT_1 " " PROGMEM Language_Str MSG_PREHEAT_1_ALL = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 全部"); //MSG_PREHEAT_1 " All" PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 热床"); //MSG_PREHEAT_1 " Bed" PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 设置"); //MSG_PREHEAT_1 " conf" - PROGMEM Language_Str MSG_PREHEAT_M = _UxGT("预热 $"); //"Preheat PREHEAT_2_LABEL" - PROGMEM Language_Str MSG_PREHEAT_M_H = _UxGT("预热 $ ~"); //"Preheat PREHEAT_2_LABEL" + PROGMEM Language_Str MSG_PREHEAT_M = _UxGT("预热 $"); // "Preheat PREHEAT_2_LABEL" + PROGMEM Language_Str MSG_PREHEAT_M_H = _UxGT("预热 $ ~"); // "Preheat PREHEAT_2_LABEL" PROGMEM Language_Str MSG_PREHEAT_M_END = _UxGT("预热 $ 喷嘴"); //MSG_PREHEAT_1 " " PROGMEM Language_Str MSG_PREHEAT_M_END_E = _UxGT("预热 $ 喷嘴 ~"); //MSG_PREHEAT_1 " " PROGMEM Language_Str MSG_PREHEAT_M_ALL = _UxGT("预热 $ 全部"); //MSG_PREHEAT_1 " All" @@ -86,20 +86,20 @@ namespace Language_zh_CN { PROGMEM Language_Str MSG_PREHEAT_M_SETTINGS = _UxGT("预热 $ 设置"); //MSG_PREHEAT_1 " conf" #endif PROGMEM Language_Str MSG_PREHEAT_CUSTOM = _UxGT("预热自定义"); - PROGMEM Language_Str MSG_COOLDOWN = _UxGT("降温"); //"Cooldown" + PROGMEM Language_Str MSG_COOLDOWN = _UxGT("降温"); // "Cooldown" PROGMEM Language_Str MSG_CUTTER_FREQUENCY = _UxGT("切割频率"); PROGMEM Language_Str MSG_LASER_MENU = _UxGT("激光控制"); PROGMEM Language_Str MSG_LASER_POWER = _UxGT("激光电源"); PROGMEM Language_Str MSG_SPINDLE_MENU = _UxGT("主轴控制"); PROGMEM Language_Str MSG_SPINDLE_POWER = _UxGT("主轴电源"); PROGMEM Language_Str MSG_SPINDLE_REVERSE = _UxGT("主轴反转"); - PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT("电源打开"); //"Switch power on" - PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT("电源关闭"); //"Switch power off" - PROGMEM Language_Str MSG_EXTRUDE = _UxGT("挤出"); //"Extrude" - PROGMEM Language_Str MSG_RETRACT = _UxGT("回抽"); //"Retract" - PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("移动轴"); //"Move axis" - PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("调平热床"); //"Bed leveling" - PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("调平热床"); //"Level bed" + PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT("电源打开"); // "Switch power on" + PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT("电源关闭"); // "Switch power off" + PROGMEM Language_Str MSG_EXTRUDE = _UxGT("挤出"); // "Extrude" + PROGMEM Language_Str MSG_RETRACT = _UxGT("回抽"); // "Retract" + PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("移动轴"); // "Move axis" + PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("调平热床"); // "Bed leveling" + PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("调平热床"); // "Level bed" PROGMEM Language_Str MSG_BED_TRAMMING = _UxGT("调平边角"); // "Bed Tramming" PROGMEM Language_Str MSG_NEXT_CORNER = _UxGT("下个边角"); // "Next corner" PROGMEM Language_Str MSG_MESH_EDITOR = _UxGT("网格编辑器"); @@ -220,27 +220,27 @@ namespace Language_zh_CN { PROGMEM Language_Str MSG_MOVING = _UxGT("移动..."); // "Moving...") PROGMEM Language_Str MSG_FREE_XY = _UxGT("释放 XY"); // "Free XY") - PROGMEM Language_Str MSG_MOVE_X = _UxGT("移动X"); //"Move X" - PROGMEM Language_Str MSG_MOVE_Y = _UxGT("移动Y"); //"Move Y" - PROGMEM Language_Str MSG_MOVE_Z = _UxGT("移动Z"); //"Move Z" - PROGMEM Language_Str MSG_MOVE_E = _UxGT("挤出机"); //"Extruder" - PROGMEM Language_Str MSG_MOVE_EN = _UxGT("挤出机 *"); //"Extruder" + PROGMEM Language_Str MSG_MOVE_X = _UxGT("移动X"); // "Move X" + PROGMEM Language_Str MSG_MOVE_Y = _UxGT("移动Y"); // "Move Y" + PROGMEM Language_Str MSG_MOVE_Z = _UxGT("移动Z"); // "Move Z" + PROGMEM Language_Str MSG_MOVE_E = _UxGT("挤出机"); // "Extruder" + PROGMEM Language_Str MSG_MOVE_EN = _UxGT("挤出机 *"); // "Extruder" PROGMEM Language_Str MSG_HOTEND_TOO_COLD = _UxGT("热端太冷"); - PROGMEM Language_Str MSG_MOVE_N_MM = _UxGT("移动 %s mm"); //"Move 0.025mm" - PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("移动 0.1 mm"); //"Move 0.1mm" - PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("移动 1 mm"); //"Move 1mm" - PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("移动 10 mm"); //"Move 10mm" - PROGMEM Language_Str MSG_MOVE_100MM = _UxGT("移动 100 mm"); //"Move 100mm" - PROGMEM Language_Str MSG_SPEED = _UxGT("速率"); //"Speed" - PROGMEM Language_Str MSG_BED_Z = _UxGT("热床Z"); //"Bed Z" - PROGMEM Language_Str MSG_NOZZLE = _UxGT("喷嘴"); //"Nozzle" 噴嘴 - PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("喷嘴 ~"); //"Nozzle" 噴嘴 + PROGMEM Language_Str MSG_MOVE_N_MM = _UxGT("移动 %s mm"); // "Move 0.025mm" + PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("移动 0.1 mm"); // "Move 0.1mm" + PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("移动 1 mm"); // "Move 1mm" + PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("移动 10 mm"); // "Move 10mm" + PROGMEM Language_Str MSG_MOVE_100MM = _UxGT("移动 100 mm"); // "Move 100mm" + PROGMEM Language_Str MSG_SPEED = _UxGT("速率"); // "Speed" + PROGMEM Language_Str MSG_BED_Z = _UxGT("热床Z"); // "Bed Z" + PROGMEM Language_Str MSG_NOZZLE = _UxGT("喷嘴"); // "Nozzle" 噴嘴 + PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("喷嘴 ~"); // "Nozzle" 噴嘴 PROGMEM Language_Str MSG_NOZZLE_PARKED = _UxGT("喷嘴已停靠"); PROGMEM Language_Str MSG_NOZZLE_STANDBY = _UxGT("喷嘴待命中"); - PROGMEM Language_Str MSG_BED = _UxGT("热床"); //"Bed" + PROGMEM Language_Str MSG_BED = _UxGT("热床"); // "Bed" PROGMEM Language_Str MSG_CHAMBER = _UxGT("机箱壳"); - PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("风扇速率"); //"Fan speed" - PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("风扇速率 ~"); //"Fan speed" + PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("风扇速率"); // "Fan speed" + PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("风扇速率 ~"); // "Fan speed" PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("存储的风扇 ~"); PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("额外风扇速率"); // "Extra fan speed" PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("额外风扇速率 ~"); // "Extra fan speed" @@ -249,70 +249,82 @@ namespace Language_zh_CN { PROGMEM Language_Str MSG_CONTROLLER_FAN_AUTO_ON = _UxGT("自动模式"); PROGMEM Language_Str MSG_CONTROLLER_FAN_SPEED = _UxGT("工作速度"); PROGMEM Language_Str MSG_CONTROLLER_FAN_DURATION = _UxGT("空闲周期"); - PROGMEM Language_Str MSG_FLOW = _UxGT("挤出速率"); //"Flow" - PROGMEM Language_Str MSG_FLOW_N = _UxGT("挤出速率 ~"); //"Flow" - PROGMEM Language_Str MSG_CONTROL = _UxGT("控制"); //"Control" - PROGMEM Language_Str MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" 最小"); //" " LCD_STR_THERMOMETER " Min" - PROGMEM Language_Str MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" 最大"); //" " LCD_STR_THERMOMETER " Max" - PROGMEM Language_Str MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" 因数"); //" " LCD_STR_THERMOMETER " Fact" - PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("自动控温"); //"Autotemp" - PROGMEM Language_Str MSG_LCD_ON = _UxGT("开"); //"On" - PROGMEM Language_Str MSG_LCD_OFF = _UxGT("关"); //"Off" + PROGMEM Language_Str MSG_FLOW = _UxGT("挤出速率"); // "Flow" + PROGMEM Language_Str MSG_FLOW_N = _UxGT("挤出速率 ~"); // "Flow" + PROGMEM Language_Str MSG_CONTROL = _UxGT("控制"); // "Control" + PROGMEM Language_Str MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" 最小"); // " " LCD_STR_THERMOMETER " Min" + PROGMEM Language_Str MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" 最大"); // " " LCD_STR_THERMOMETER " Max" + PROGMEM Language_Str MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" 因数"); // " " LCD_STR_THERMOMETER " Fact" + PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("自动控温"); // "Autotemp" + PROGMEM Language_Str MSG_LCD_ON = _UxGT("开"); // "On" + PROGMEM Language_Str MSG_LCD_OFF = _UxGT("关"); // "Off" PROGMEM Language_Str MSG_PID_AUTOTUNE = _UxGT("自动PID"); PROGMEM Language_Str MSG_PID_AUTOTUNE_E = _UxGT("自动PID *"); PROGMEM Language_Str MSG_PID_AUTOTUNE_DONE = _UxGT("PID调整完成"); PROGMEM Language_Str MSG_PID_BAD_EXTRUDER_NUM = _UxGT("自动调失败. 坏的挤出机"); PROGMEM Language_Str MSG_PID_TEMP_TOO_HIGH = _UxGT("自动调失败. 温度太高"); PROGMEM Language_Str MSG_PID_TIMEOUT = _UxGT("自动调失败! 超时"); - PROGMEM Language_Str MSG_SELECT = _UxGT("选择"); //"Select" + PROGMEM Language_Str MSG_SELECT = _UxGT("选择"); // "Select" PROGMEM Language_Str MSG_SELECT_E = _UxGT("选择 *"); - PROGMEM Language_Str MSG_ACC = _UxGT("加速度"); //"Accel" acceleration + PROGMEM Language_Str MSG_ACC = _UxGT("加速度"); // "Accel" acceleration PROGMEM Language_Str MSG_JERK = _UxGT("抖动速率"); // "Jerk" - PROGMEM Language_Str MSG_VA_JERK = _UxGT("轴抖动速率") LCD_STR_A; //"Va-jerk" - PROGMEM Language_Str MSG_VB_JERK = _UxGT("轴抖动速率") LCD_STR_B; //"Vb-jerk" - PROGMEM Language_Str MSG_VC_JERK = _UxGT("轴抖动速率") LCD_STR_C; //"Vc-jerk" - PROGMEM Language_Str MSG_VE_JERK = _UxGT("挤出机抖动速率"); //"Ve-jerk" + PROGMEM Language_Str MSG_VA_JERK = _UxGT("轴抖动速率") LCD_STR_A; // "Va-jerk" + PROGMEM Language_Str MSG_VB_JERK = _UxGT("轴抖动速率") LCD_STR_B; // "Vb-jerk" + PROGMEM Language_Str MSG_VC_JERK = _UxGT("轴抖动速率") LCD_STR_C; // "Vc-jerk" + PROGMEM Language_Str MSG_VI_JERK = _UxGT("轴抖动速率") LCD_STR_I; // "Vi-jerk" + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("轴抖动速率") LCD_STR_J; // "Vj-jerk" + PROGMEM Language_Str MSG_VK_JERK = _UxGT("轴抖动速率") LCD_STR_K; // "Vk-jerk" + PROGMEM Language_Str MSG_VE_JERK = _UxGT("挤出机抖动速率"); // "Ve-jerk" PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("接点差"); PROGMEM Language_Str MSG_VELOCITY = _UxGT("速度"); // "Velocity" - PROGMEM Language_Str MSG_VMAX_A = _UxGT("最大进料速率") LCD_STR_A; //"Vmax " max_feedrate_mm_s - PROGMEM Language_Str MSG_VMAX_B = _UxGT("最大进料速率") LCD_STR_B; //"Vmax " max_feedrate_mm_s - PROGMEM Language_Str MSG_VMAX_C = _UxGT("最大进料速率") LCD_STR_C; //"Vmax " max_feedrate_mm_s - PROGMEM Language_Str MSG_VMAX_E = _UxGT("最大进料速率") LCD_STR_E; //"Vmax " max_feedrate_mm_s - PROGMEM Language_Str MSG_VMAX_EN = _UxGT("最大进料速率 *"); //"Vmax " max_feedrate_mm_s - PROGMEM Language_Str MSG_VMIN = _UxGT("最小进料速率"); //"Vmin" min_feedrate_mm_s - PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("最小移动速率"); //"VTrav min" min_travel_feedrate_mm_s, (target) speed of the move + PROGMEM Language_Str MSG_VMAX_A = _UxGT("最大进料速率") LCD_STR_A; // "Vmax " max_feedrate_mm_s + PROGMEM Language_Str MSG_VMAX_B = _UxGT("最大进料速率") LCD_STR_B; + PROGMEM Language_Str MSG_VMAX_C = _UxGT("最大进料速率") LCD_STR_C; + PROGMEM Language_Str MSG_VMAX_I = _UxGT("最大进料速率") LCD_STR_I; + PROGMEM Language_Str MSG_VMAX_J = _UxGT("最大进料速率") LCD_STR_J; + PROGMEM Language_Str MSG_VMAX_K = _UxGT("最大进料速率") LCD_STR_K; + PROGMEM Language_Str MSG_VMAX_E = _UxGT("最大进料速率") LCD_STR_E; + PROGMEM Language_Str MSG_VMAX_EN = _UxGT("最大进料速率 *"); + PROGMEM Language_Str MSG_VMIN = _UxGT("最小进料速率"); // "Vmin" min_feedrate_mm_s + PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("最小移动速率"); // "VTrav min" min_travel_feedrate_mm_s, (target) speed of the move PROGMEM Language_Str MSG_ACCELERATION = _UxGT("加速度"); // "Acceleration" - PROGMEM Language_Str MSG_AMAX_A = _UxGT("最大打印加速度") LCD_STR_A; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves - PROGMEM Language_Str MSG_AMAX_B = _UxGT("最大打印加速度") LCD_STR_B; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves - PROGMEM Language_Str MSG_AMAX_C = _UxGT("最大打印加速度") LCD_STR_C; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves - PROGMEM Language_Str MSG_AMAX_E = _UxGT("最大打印加速度") LCD_STR_E; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves - PROGMEM Language_Str MSG_AMAX_EN = _UxGT("最大打印加速度 *"); //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves - PROGMEM Language_Str MSG_A_RETRACT = _UxGT("收进加速度"); //"A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts - PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("非打印移动加速度"); //"A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves + PROGMEM Language_Str MSG_AMAX_A = _UxGT("最大打印加速度") LCD_STR_A; // "Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves + PROGMEM Language_Str MSG_AMAX_B = _UxGT("最大打印加速度") LCD_STR_B; + PROGMEM Language_Str MSG_AMAX_C = _UxGT("最大打印加速度") LCD_STR_C; + PROGMEM Language_Str MSG_AMAX_I = _UxGT("最大打印加速度") LCD_STR_I; + PROGMEM Language_Str MSG_AMAX_J = _UxGT("最大打印加速度") LCD_STR_J; + PROGMEM Language_Str MSG_AMAX_K = _UxGT("最大打印加速度") LCD_STR_K; + PROGMEM Language_Str MSG_AMAX_E = _UxGT("最大打印加速度") LCD_STR_E; + PROGMEM Language_Str MSG_AMAX_EN = _UxGT("最大打印加速度 *"); + PROGMEM Language_Str MSG_A_RETRACT = _UxGT("收进加速度"); // "A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts + PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("非打印移动加速度"); // "A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves PROGMEM Language_Str MSG_XY_FREQUENCY_LIMIT = _UxGT("频率最大"); PROGMEM Language_Str MSG_XY_FREQUENCY_FEEDRATE = _UxGT("进给速度"); - PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("轴步数/mm"); //"Steps/mm" axis_steps_per_mm, axis steps-per-unit G92 - PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT("步数/mm"); //"Asteps/mm" - PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT("步数/mm"); //"Bsteps/mm" - PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT("步数/mm"); //"Csteps/mm" - PROGMEM Language_Str MSG_E_STEPS = _UxGT("E 步数/mm"); //"Esteps/mm" + PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("轴步数/mm"); // "Steps/mm" axis_steps_per_mm, axis steps-per-unit G92 + PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" 步数/mm"); // "Asteps/mm" + PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" 步数/mm"); + PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" 步数/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" 步数/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" 步数/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" 步数/mm"); + PROGMEM Language_Str MSG_E_STEPS = _UxGT("E 步数/mm"); // "Esteps/mm" PROGMEM Language_Str MSG_EN_STEPS = _UxGT("* 步数/mm"); - PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("温度"); //"Temperature" - PROGMEM Language_Str MSG_MOTION = _UxGT("运动"); //"Motion" - PROGMEM Language_Str MSG_FILAMENT = _UxGT("料丝"); //"Filament" menu_advanced_filament - PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("E 在 mm") SUPERSCRIPT_THREE; //"E in mm3" volumetric_enabled + PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("温度"); // "Temperature" + PROGMEM Language_Str MSG_MOTION = _UxGT("运动"); // "Motion" + PROGMEM Language_Str MSG_FILAMENT = _UxGT("料丝"); // "Filament" menu_advanced_filament + PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("E 在 mm") SUPERSCRIPT_THREE; // "E in mm3" volumetric_enabled PROGMEM Language_Str MSG_VOLUMETRIC_LIMIT = _UxGT("E 限制 在 mm") SUPERSCRIPT_THREE; PROGMEM Language_Str MSG_VOLUMETRIC_LIMIT_E = _UxGT("E 限制 *"); - PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("丝料直径"); //"Fil. Dia." + PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("丝料直径"); // "Fil. Dia." PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT("丝料直径 *"); PROGMEM Language_Str MSG_FILAMENT_UNLOAD = _UxGT("卸载 mm"); // "Unload mm" PROGMEM Language_Str MSG_FILAMENT_LOAD = _UxGT("装载 mm"); // "Load mm" PROGMEM Language_Str MSG_ADVANCE_K = _UxGT("Advance K"); PROGMEM Language_Str MSG_ADVANCE_K_E = _UxGT("Advance K *"); - PROGMEM Language_Str MSG_CONTRAST = _UxGT("LCD对比度"); //"LCD contrast" - PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("保存设置"); //"Store memory" - PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("装载设置"); //"Load memory" - PROGMEM Language_Str MSG_RESTORE_DEFAULTS = _UxGT("恢复安全值"); //"Restore Defaults" + PROGMEM Language_Str MSG_CONTRAST = _UxGT("LCD对比度"); // "LCD contrast" + PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("保存设置"); // "Store memory" + PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("装载设置"); // "Load memory" + PROGMEM Language_Str MSG_RESTORE_DEFAULTS = _UxGT("恢复安全值"); // "Restore Defaults" PROGMEM Language_Str MSG_INIT_EEPROM = _UxGT("初始化设置"); // "Initialize EEPROM" PROGMEM Language_Str MSG_ERR_EEPROM_CRC = _UxGT("EEPROM CRC 错误"); PROGMEM Language_Str MSG_ERR_EEPROM_INDEX = _UxGT("EEPROM Index 错误"); @@ -321,9 +333,9 @@ namespace Language_zh_CN { PROGMEM Language_Str MSG_MEDIA_UPDATE = _UxGT("存储器更新"); PROGMEM Language_Str MSG_RESET_PRINTER = _UxGT("复位打印机"); PROGMEM Language_Str MSG_REFRESH = LCD_STR_REFRESH _UxGT("刷新"); - PROGMEM Language_Str MSG_INFO_SCREEN = _UxGT("信息屏"); //"Info screen" - PROGMEM Language_Str MSG_PREPARE = _UxGT("准备"); //"Prepare" - PROGMEM Language_Str MSG_TUNE = _UxGT("调整"); //"Tune" + PROGMEM Language_Str MSG_INFO_SCREEN = _UxGT("信息屏"); // "Info screen" + PROGMEM Language_Str MSG_PREPARE = _UxGT("准备"); // "Prepare" + PROGMEM Language_Str MSG_TUNE = _UxGT("调整"); // "Tune" PROGMEM Language_Str MSG_POWER_MONITOR = _UxGT("电源监控"); PROGMEM Language_Str MSG_CURRENT = _UxGT("电流"); PROGMEM Language_Str MSG_VOLTAGE = _UxGT("电压"); @@ -340,33 +352,33 @@ namespace Language_zh_CN { PROGMEM Language_Str MSG_BUTTON_BACK = _UxGT("返回"); PROGMEM Language_Str MSG_BUTTON_PROCEED = _UxGT("继续"); PROGMEM Language_Str MSG_PAUSING = _UxGT("暂停中..."); - PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("暂停打印"); //"Pause print" - PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("恢复打印"); //"Resume print" - PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("停止打印"); //"Stop print" + PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("暂停打印"); // "Pause print" + PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("恢复打印"); // "Resume print" + PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("停止打印"); // "Stop print" PROGMEM Language_Str MSG_PRINTING_OBJECT = _UxGT("打印物体"); PROGMEM Language_Str MSG_CANCEL_OBJECT = _UxGT("取消物体"); PROGMEM Language_Str MSG_CANCEL_OBJECT_N = _UxGT("取消物体 ="); PROGMEM Language_Str MSG_OUTAGE_RECOVERY = _UxGT("中断恢复"); - PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("从存储卡上打印"); //"Print from SD" - PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("无存储卡"); //"No SD card" - PROGMEM Language_Str MSG_DWELL = _UxGT("休眠中 ..."); //"Sleep..." - PROGMEM Language_Str MSG_USERWAIT = _UxGT("点击继续 ..."); //"Click to resume..." + PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("从存储卡上打印"); // "Print from SD" + PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("无存储卡"); // "No SD card" + PROGMEM Language_Str MSG_DWELL = _UxGT("休眠中 ..."); // "Sleep..." + PROGMEM Language_Str MSG_USERWAIT = _UxGT("点击继续 ..."); // "Click to resume..." PROGMEM Language_Str MSG_PRINT_PAUSED = _UxGT("暫停打印"); // "Print paused" PROGMEM Language_Str MSG_PRINTING = _UxGT("打印中..."); - PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("已取消打印"); //"Print aborted" + PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("已取消打印"); // "Print aborted" PROGMEM Language_Str MSG_PRINT_DONE = _UxGT("打印已完成"); - PROGMEM Language_Str MSG_NO_MOVE = _UxGT("无移动"); //"No move." - PROGMEM Language_Str MSG_KILLED = _UxGT("已杀掉"); //"KILLED. " - PROGMEM Language_Str MSG_STOPPED = _UxGT("已停止"); //"STOPPED. " - PROGMEM Language_Str MSG_CONTROL_RETRACT = _UxGT("回抽长度mm"); //"Retract mm" retract_length, retract length (positive mm) - PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP = _UxGT("换手回抽长度mm"); //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change - PROGMEM Language_Str MSG_CONTROL_RETRACTF = _UxGT("回抽速率mm/s"); //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) - PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); //"Hop mm" retract_zraise, retract Z-lift - PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER = _UxGT("回抽恢复长度mm"); //"UnRet +mm" retract_recover_extra, additional recover length (mm, added to retract length when recovering) - PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("换手回抽恢复长度mm"); //"S UnRet+mm" swap_retract_recover_extra, additional swap recover length (mm, added to retract length when recovering from extruder change) - PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT("回抽恢复后进料速率mm/s"); //"Unretract V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) + PROGMEM Language_Str MSG_NO_MOVE = _UxGT("无移动"); // "No move." + PROGMEM Language_Str MSG_KILLED = _UxGT("已杀掉"); // "KILLED. " + PROGMEM Language_Str MSG_STOPPED = _UxGT("已停止"); // "STOPPED. " + PROGMEM Language_Str MSG_CONTROL_RETRACT = _UxGT("回抽长度mm"); // "Retract mm" retract_length, retract length (positive mm) + PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP = _UxGT("换手回抽长度mm"); // "Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change + PROGMEM Language_Str MSG_CONTROL_RETRACTF = _UxGT("回抽速率mm/s"); // "Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) + PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); // "Hop mm" retract_zraise, retract Z-lift + PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER = _UxGT("回抽恢复长度mm"); // "UnRet +mm" retract_recover_extra, additional recover length (mm, added to retract length when recovering) + PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("换手回抽恢复长度mm"); // "S UnRet+mm" swap_retract_recover_extra, additional swap recover length (mm, added to retract length when recovering from extruder change) + PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT("回抽恢复后进料速率mm/s"); // "Unretract V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("S UnRet V"); // "S UnRet V" - PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("自动抽回"); //"Auto-Retract" autoretract_enabled, + PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("自动抽回"); // "Auto-Retract" autoretract_enabled, PROGMEM Language_Str MSG_FILAMENT_SWAP_LENGTH = _UxGT("交换长度"); PROGMEM Language_Str MSG_FILAMENT_SWAP_EXTRA = _UxGT("额外的交换"); PROGMEM Language_Str MSG_FILAMENT_PURGE_LENGTH = _UxGT("清洗长度"); @@ -384,17 +396,17 @@ namespace Language_zh_CN { PROGMEM Language_Str MSG_TOOL_MIGRATION_AUTO = _UxGT("自动迁移"); PROGMEM Language_Str MSG_TOOL_MIGRATION_END = _UxGT("上一个挤出机"); PROGMEM Language_Str MSG_TOOL_MIGRATION_SWAP = _UxGT("迁移至 *"); - PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("更换丝料"); //"Change filament" - PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("更换丝料 *"); //"Change filament" + PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("更换丝料"); // "Change filament" + PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("更换丝料 *"); // "Change filament" PROGMEM Language_Str MSG_FILAMENTLOAD = _UxGT("装载丝料"); // "Load filament" PROGMEM Language_Str MSG_FILAMENTLOAD_E = _UxGT("装载丝料 *"); // "Load filament" PROGMEM Language_Str MSG_FILAMENTUNLOAD = _UxGT("卸载丝料"); // "Unload filament" PROGMEM Language_Str MSG_FILAMENTUNLOAD_E = _UxGT("卸载丝料 *"); // "Unload filament" PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL = _UxGT("卸载全部"); // "Unload All" - PROGMEM Language_Str MSG_ATTACH_MEDIA = _UxGT("初始化存储卡"); //"Init. SD card" - PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("更换存储卡"); //"Change SD card" + PROGMEM Language_Str MSG_ATTACH_MEDIA = _UxGT("初始化存储卡"); // "Init. SD card" + PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("更换存储卡"); // "Change SD card" PROGMEM Language_Str MSG_RELEASE_MEDIA = _UxGT("释放存储卡"); - PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z探针在热床之外"); //"Z probe out. bed" Z probe is not within the physical limits + PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z探针在热床之外"); // "Z probe out. bed" Z probe is not within the physical limits PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("偏斜因数"); // "Skew Factor" PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch"); // "BLTouch" PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("自检"); @@ -416,39 +428,39 @@ namespace Language_zh_CN { PROGMEM Language_Str MSG_MANUAL_DEPLOY_TOUCHMI = _UxGT("部署TouchMI"); PROGMEM Language_Str MSG_MANUAL_DEPLOY = _UxGT("部署Z探针"); PROGMEM Language_Str MSG_MANUAL_STOW = _UxGT("收好Z探针"); - PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("归位 %s%s%s 先"); //"Home ... first" + PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("归位 %s%s%s 先"); // "Home ... first" PROGMEM Language_Str MSG_ZPROBE_OFFSETS = _UxGT("探针偏移量"); PROGMEM Language_Str MSG_ZPROBE_XOFFSET = _UxGT("探针X偏移"); PROGMEM Language_Str MSG_ZPROBE_YOFFSET = _UxGT("探针Y偏移"); - PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("探针Z偏移"); //"Z Offset" - PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT("微量调整X轴"); //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts - PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT("微量调整Y轴"); //"Babystep Y" - PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT("微量调整Z轴"); //"Babystep Z" + PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("探针Z偏移"); // "Z Offset" + PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT("微量调整X轴"); // "Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts + PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT("微量调整Y轴"); // "Babystep Y" + PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT("微量调整Z轴"); // "Babystep Z" PROGMEM Language_Str MSG_BABYSTEP_TOTAL = _UxGT("总计"); - PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT("挡块终止"); //"Endstop abort" - PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("加热失败"); //"Heating failed" - PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("错误：冗余温度"); //"Err: REDUNDANT TEMP" - PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("温控失控"); //"THERMAL RUNAWAY" + PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT("挡块终止"); // "Endstop abort" + PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("加热失败"); // "Heating failed" + PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("错误：冗余温度"); // "Err: REDUNDANT TEMP" + PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("温控失控"); // "THERMAL RUNAWAY" PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED = _UxGT("热床热量失控"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("机箱热量失控"); - PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("错误：最高温度"); //"Err: MAXTEMP" - PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("错误：最低温度"); //"Err: MINTEMP" - PROGMEM Language_Str MSG_HALTED = _UxGT("打印停机"); //"PRINTER HALTED" - PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("请重置"); //"Please reset" - PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("天"); //"d" // One character only - PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT("时"); //"h" // One character only - PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT("分"); //"m" // One character only - PROGMEM Language_Str MSG_HEATING = _UxGT("加热中 ..."); //"Heating..." + PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("错误：最高温度"); // "Err: MAXTEMP" + PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("错误：最低温度"); // "Err: MINTEMP" + PROGMEM Language_Str MSG_HALTED = _UxGT("打印停机"); // "PRINTER HALTED" + PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("请重置"); // "Please reset" + PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("天"); // "d" // One character only + PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT("时"); // "h" // One character only + PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT("分"); // "m" // One character only + PROGMEM Language_Str MSG_HEATING = _UxGT("加热中 ..."); // "Heating..." PROGMEM Language_Str MSG_COOLING = _UxGT("冷却中 ..."); - PROGMEM Language_Str MSG_BED_HEATING = _UxGT("加热热床中 ..."); //"Bed Heating..." + PROGMEM Language_Str MSG_BED_HEATING = _UxGT("加热热床中 ..."); // "Bed Heating..." PROGMEM Language_Str MSG_BED_COOLING = _UxGT("热床冷却中 ..."); PROGMEM Language_Str MSG_CHAMBER_HEATING = _UxGT("机箱加热中 ..."); PROGMEM Language_Str MSG_CHAMBER_COOLING = _UxGT("机箱冷却中 ..."); - PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("⊿校准"); //"Delta Calibration" - PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("⊿校准X"); //"Calibrate X" - PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("⊿校准Y"); //"Calibrate Y" - PROGMEM Language_Str MSG_DELTA_CALIBRATE_Z = _UxGT("⊿校准Z"); //"Calibrate Z" - PROGMEM Language_Str MSG_DELTA_CALIBRATE_CENTER = _UxGT("⊿校准中心"); //"Calibrate Center" + PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("⊿校准"); // "Delta Calibration" + PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("⊿校准X"); // "Calibrate X" + PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("⊿校准Y"); // "Calibrate Y" + PROGMEM Language_Str MSG_DELTA_CALIBRATE_Z = _UxGT("⊿校准Z"); // "Calibrate Z" + PROGMEM Language_Str MSG_DELTA_CALIBRATE_CENTER = _UxGT("⊿校准中心"); // "Calibrate Center" PROGMEM Language_Str MSG_DELTA_SETTINGS = _UxGT("⊿设置"); // "Delta Settings" PROGMEM Language_Str MSG_DELTA_AUTO_CALIBRATE = _UxGT("⊿自动校准"); // "Auto Calibration" PROGMEM Language_Str MSG_DELTA_HEIGHT_CALIBRATE = _UxGT("设置⊿高度"); // "Set Delta Height" @@ -456,19 +468,19 @@ namespace Language_zh_CN { PROGMEM Language_Str MSG_DELTA_DIAG_ROD = _UxGT("⊿斜柱"); // "Diag Rod" PROGMEM Language_Str MSG_DELTA_HEIGHT = _UxGT("⊿高度"); // "Height" PROGMEM Language_Str MSG_DELTA_RADIUS = _UxGT("⊿半径"); // "Radius" - PROGMEM Language_Str MSG_INFO_MENU = _UxGT("关于打印机"); //"About Printer" - PROGMEM Language_Str MSG_INFO_PRINTER_MENU = _UxGT("打印机信息"); //"Printer Info" + PROGMEM Language_Str MSG_INFO_MENU = _UxGT("关于打印机"); // "About Printer" + PROGMEM Language_Str MSG_INFO_PRINTER_MENU = _UxGT("打印机信息"); // "Printer Info" PROGMEM Language_Str MSG_3POINT_LEVELING = _UxGT("三点调平"); // "3-Point Leveling" PROGMEM Language_Str MSG_LINEAR_LEVELING = _UxGT("线性调平"); // "Linear Leveling" PROGMEM Language_Str MSG_BILINEAR_LEVELING = _UxGT("双线性调平"); // "Bilinear Leveling" PROGMEM Language_Str MSG_UBL_LEVELING = _UxGT("统一热床调平(UBL)"); // "Unified Bed Leveling" PROGMEM Language_Str MSG_MESH_LEVELING = _UxGT("网格调平"); // "Mesh Leveling" - PROGMEM Language_Str MSG_INFO_STATS_MENU = _UxGT("打印机统计"); //"Printer Stats" - PROGMEM Language_Str MSG_INFO_BOARD_MENU = _UxGT("主板信息"); //"Board Info" - PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU = _UxGT("温度计"); //"Thermistors" - PROGMEM Language_Str MSG_INFO_EXTRUDERS = _UxGT("挤出机"); //"Extruders" - PROGMEM Language_Str MSG_INFO_BAUDRATE = _UxGT("波特率"); //"Baud" - PROGMEM Language_Str MSG_INFO_PROTOCOL = _UxGT("协议"); //"Protocol" + PROGMEM Language_Str MSG_INFO_STATS_MENU = _UxGT("打印机统计"); // "Printer Stats" + PROGMEM Language_Str MSG_INFO_BOARD_MENU = _UxGT("主板信息"); // "Board Info" + PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU = _UxGT("温度计"); // "Thermistors" + PROGMEM Language_Str MSG_INFO_EXTRUDERS = _UxGT("挤出机"); // "Extruders" + PROGMEM Language_Str MSG_INFO_BAUDRATE = _UxGT("波特率"); // "Baud" + PROGMEM Language_Str MSG_INFO_PROTOCOL = _UxGT("协议"); // "Protocol" PROGMEM Language_Str MSG_INFO_RUNAWAY_OFF = _UxGT("监控温度失控:关"); PROGMEM Language_Str MSG_INFO_RUNAWAY_ON = _UxGT("监控温度失控:开"); PROGMEM Language_Str MSG_HOTEND_IDLE_TIMEOUT = _UxGT("热端空闲超时"); @@ -479,26 +491,29 @@ namespace Language_zh_CN { PROGMEM Language_Str MSG_KILL_EXPECTED_PRINTER = _UxGT("打印机不正确"); // "The printer is incorrect" #if LCD_WIDTH >= 20 - PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("打印计数"); //"Print Count" - PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("完成了"); //"Completed" - PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("总打印时间"); //"Total print time" - PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("最长工作时间"); //"Longest job time" - PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("总计挤出"); //"Extruded total" + PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("打印计数"); // "Print Count" + PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("完成了"); // "Completed" + PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("总打印时间"); // "Total print time" + PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("最长工作时间"); // "Longest job time" + PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("总计挤出"); // "Extruded total" #else - PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("打印数"); //"Prints" - PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("完成"); //"Completed" - PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("总共"); //"Total" - PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("最长"); //"Longest" - PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("已挤出"); //"Extruded" + PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("打印数"); // "Prints" + PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("完成"); // "Completed" + PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("总共"); // "Total" + PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("最长"); // "Longest" + PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("已挤出"); // "Extruded" #endif - PROGMEM Language_Str MSG_INFO_MIN_TEMP = _UxGT("最低温度"); //"Min Temp" - PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("最高温度"); //"Max Temp" - PROGMEM Language_Str MSG_INFO_PSU = _UxGT("电源供应"); //"Power Supply" + PROGMEM Language_Str MSG_INFO_MIN_TEMP = _UxGT("最低温度"); // "Min Temp" + PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("最高温度"); // "Max Temp" + PROGMEM Language_Str MSG_INFO_PSU = _UxGT("电源供应"); // "Power Supply" PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("驱动力度"); // "Drive Strength" - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X 驱动 %"); // "X Driver %" - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y 驱动 %"); // "Y Driver %" - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z 驱动 %"); // "Z Driver %" + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" 驱动 %"); // "X Driver %" + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" 驱动 %"); + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" 驱动 %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" 驱动 %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" 驱动 %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" 驱动 %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E 驱动 %"); // "E Driver %" PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("TMC 连接错误"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("保存驱动设置"); // "DAC EEPROM Write" @@ -508,7 +523,7 @@ namespace Language_zh_CN { PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("卸载丝料"); // "UNLOAD FILAMENT" PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("恢复选项:"); // "RESUME OPTIONS:" PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("清除更多"); // "Purge more" - PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("恢复打印"); //"Resume print" + PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("恢复打印"); // "Resume print" PROGMEM Language_Str MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" 喷嘴: "); // " Nozzle: " PROGMEM Language_Str MSG_RUNOUT_SENSOR = _UxGT("断料传感器"); PROGMEM Language_Str MSG_RUNOUT_DISTANCE_MM = _UxGT("断料距离mm"); @@ -583,15 +598,15 @@ namespace Language_zh_CN { #else PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_1_LINE("按下继续")); PROGMEM Language_Str MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_1_LINE("停靠中...")); - PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("请等待 ...")); //"Please wait..." - PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("插入并单击")); //"Insert and Click" + PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("请等待 ...")); // "Please wait..." + PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("插入并单击")); // "Insert and Click" PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_1_LINE("按下加热")); PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("加热中 ...")); // "Heating..." - PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("退出中 ...")); //"Ejecting..." - PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("装载中 ...")); //"Loading..." + PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("退出中 ...")); // "Ejecting..." + PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("装载中 ...")); // "Loading..." PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("清除中 ...")); // "Purging..." PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_1_LINE("按下完成")); - PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("恢复中 ...")); //"Resuming..." + PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("恢复中 ...")); // "Resuming..." #endif PROGMEM Language_Str MSG_TMC_DRIVERS = _UxGT("TMC驱动器"); PROGMEM Language_Str MSG_TMC_CURRENT = _UxGT("驱动电流"); @@ -605,6 +620,9 @@ namespace Language_zh_CN { PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A; PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B; PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C; + PROGMEM Language_Str MSG_BACKLASH_I = LCD_STR_I; + PROGMEM Language_Str MSG_BACKLASH_J = LCD_STR_J; + PROGMEM Language_Str MSG_BACKLASH_K = LCD_STR_K; PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("校正"); PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("平滑的"); diff --git a/Marlin/src/lcd/language/language_zh_TW.h b/Marlin/src/lcd/language/language_zh_TW.h index f162536132bd..2c7d1bf69ff4 100644 --- a/Marlin/src/lcd/language/language_zh_TW.h +++ b/Marlin/src/lcd/language/language_zh_TW.h @@ -33,84 +33,84 @@ namespace Language_zh_TW { constexpr uint8_t CHARSIZE = 3; PROGMEM Language_Str LANGUAGE = _UxGT("Traditional Chinese"); - PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT("已就緒."); //" ready." + PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT("已就緒."); // " ready." PROGMEM Language_Str MSG_MARLIN = _UxGT("Marlin"); - PROGMEM Language_Str MSG_YES = _UxGT("是"); //"YES" - PROGMEM Language_Str MSG_NO = _UxGT("否"); //"NO" + PROGMEM Language_Str MSG_YES = _UxGT("是"); // "YES" + PROGMEM Language_Str MSG_NO = _UxGT("否"); // "NO" PROGMEM Language_Str MSG_BACK = _UxGT("返回"); // "Back" - PROGMEM Language_Str MSG_MEDIA_ABORTING = _UxGT("正在中止..."); //"Aborting..." - PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("記憶卡已插入"); //"Card inserted" - PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("記憶卡被拔出"); //"Card removed" - PROGMEM Language_Str MSG_MEDIA_WAITING = _UxGT("等待記憶卡"); //"Waiting for media" + PROGMEM Language_Str MSG_MEDIA_ABORTING = _UxGT("正在中止..."); // "Aborting..." + PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("記憶卡已插入"); // "Card inserted" + PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("記憶卡被拔出"); // "Card removed" + PROGMEM Language_Str MSG_MEDIA_WAITING = _UxGT("等待記憶卡"); // "Waiting for media" PROGMEM Language_Str MSG_MEDIA_READ_ERROR = _UxGT("記憶卡讀取錯誤"); //"Media read error" - PROGMEM Language_Str MSG_MEDIA_USB_REMOVED = _UxGT("USB裝置已移除"); //"USB device removed" - PROGMEM Language_Str MSG_MEDIA_USB_FAILED = _UxGT("USB啟動失敗"); //"USB start failed" - PROGMEM Language_Str MSG_LCD_ENDSTOPS = _UxGT("擋塊"); //"Endstops" // Max length 8 characters - PROGMEM Language_Str MSG_LCD_SOFT_ENDSTOPS = _UxGT("軟體擋塊"); //"Soft Endstops" - PROGMEM Language_Str MSG_MAIN = _UxGT("主選單"); //"Main" - PROGMEM Language_Str MSG_ADVANCED_SETTINGS = _UxGT("進階設置"); //"Advanced Settings" + PROGMEM Language_Str MSG_MEDIA_USB_REMOVED = _UxGT("USB裝置已移除"); // "USB device removed" + PROGMEM Language_Str MSG_MEDIA_USB_FAILED = _UxGT("USB啟動失敗"); // "USB start failed" + PROGMEM Language_Str MSG_LCD_ENDSTOPS = _UxGT("擋塊"); // "Endstops" // Max length 8 characters + PROGMEM Language_Str MSG_LCD_SOFT_ENDSTOPS = _UxGT("軟體擋塊"); // "Soft Endstops" + PROGMEM Language_Str MSG_MAIN = _UxGT("主選單"); // "Main" + PROGMEM Language_Str MSG_ADVANCED_SETTINGS = _UxGT("進階設置"); // "Advanced Settings" PROGMEM Language_Str MSG_CONFIGURATION = _UxGT("設置"); //Configuration - PROGMEM Language_Str MSG_RUN_AUTO_FILES = _UxGT("自動開始"); //"Autostart" - PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT("關閉步進馬達"); //"Disable steppers" + PROGMEM Language_Str MSG_RUN_AUTO_FILES = _UxGT("自動開始"); // "Autostart" + PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT("關閉步進馬達"); // "Disable steppers" PROGMEM Language_Str MSG_DEBUG_MENU = _UxGT("除錯選單"); // "Debug Menu" PROGMEM Language_Str MSG_PROGRESS_BAR_TEST = _UxGT("進度條測試"); // "Progress Bar Test" - PROGMEM Language_Str MSG_AUTO_HOME = _UxGT("自動回原點"); //"Auto home" - PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT("回X原點"); //"Home X" - PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT("回Y原點"); //"Home Y" - PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT("回Z原點"); //"Home Z" - PROGMEM Language_Str MSG_AUTO_Z_ALIGN = _UxGT("自動Z對齊"); //"Auto Z-Align" - PROGMEM Language_Str MSG_LEVEL_BED_HOMING = _UxGT("平台調平XYZ歸原點"); //"Homing XYZ" - PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("單擊開始熱床調平"); //"Click to Begin" - PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT("下個熱床調平點"); //"Next Point" - PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT("完成熱床調平"); //"Leveling Done!" + PROGMEM Language_Str MSG_AUTO_HOME = _UxGT("自動回原點"); // "Auto home" + PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT("回X原點"); // "Home X" + PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT("回Y原點"); // "Home Y" + PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT("回Z原點"); // "Home Z" + PROGMEM Language_Str MSG_AUTO_Z_ALIGN = _UxGT("自動Z對齊"); // "Auto Z-Align" + PROGMEM Language_Str MSG_LEVEL_BED_HOMING = _UxGT("平台調平XYZ歸原點"); // "Homing XYZ" + PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("單擊開始熱床調平"); // "Click to Begin" + PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT("下個熱床調平點"); // "Next Point" + PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT("完成熱床調平"); // "Leveling Done!" PROGMEM Language_Str MSG_Z_FADE_HEIGHT = _UxGT("淡出高度"); // "Fade Height" - PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT("設置原點偏移"); //"Set home offsets" - PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("偏移已啟用"); //"Offsets applied" - PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("設置原點"); //"Set origin" + PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT("設置原點偏移"); // "Set home offsets" + PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("偏移已啟用"); // "Offsets applied" + PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("設置原點"); // "Set origin" #if PREHEAT_COUNT - PROGMEM Language_Str MSG_PREHEAT_1 = _UxGT("預熱 ") PREHEAT_1_LABEL; //"Preheat PREHEAT_1_LABEL" - PROGMEM Language_Str MSG_PREHEAT_1_H = _UxGT("預熱 ") PREHEAT_1_LABEL " ~"; //"Preheat PREHEAT_1_LABEL" + PROGMEM Language_Str MSG_PREHEAT_1 = _UxGT("預熱 ") PREHEAT_1_LABEL; // "Preheat PREHEAT_1_LABEL" + PROGMEM Language_Str MSG_PREHEAT_1_H = _UxGT("預熱 ") PREHEAT_1_LABEL " ~"; // "Preheat PREHEAT_1_LABEL" PROGMEM Language_Str MSG_PREHEAT_1_END = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 噴嘴"); //MSG_PREHEAT_1 " " PROGMEM Language_Str MSG_PREHEAT_1_END_E = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 噴嘴 ~"); //MSG_PREHEAT_1 " " PROGMEM Language_Str MSG_PREHEAT_1_ALL = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 全部"); //MSG_PREHEAT_1 " All" PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 熱床"); //MSG_PREHEAT_1 " Bed" PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 設置"); //MSG_PREHEAT_1 " conf" - PROGMEM Language_Str MSG_PREHEAT_M = _UxGT("預熱 $"); //"Preheat PREHEAT_1_LABEL" - PROGMEM Language_Str MSG_PREHEAT_M_H = _UxGT("預熱 $ ~"); //"Preheat PREHEAT_1_LABEL" + PROGMEM Language_Str MSG_PREHEAT_M = _UxGT("預熱 $"); // "Preheat PREHEAT_1_LABEL" + PROGMEM Language_Str MSG_PREHEAT_M_H = _UxGT("預熱 $ ~"); // "Preheat PREHEAT_1_LABEL" PROGMEM Language_Str MSG_PREHEAT_M_END = _UxGT("預熱 $ 噴嘴"); //MSG_PREHEAT_1 " " PROGMEM Language_Str MSG_PREHEAT_M_END_E = _UxGT("預熱 $ 噴嘴 ~"); //MSG_PREHEAT_1 " " PROGMEM Language_Str MSG_PREHEAT_M_ALL = _UxGT("預熱 $ 全部"); //MSG_PREHEAT_1 " All" PROGMEM Language_Str MSG_PREHEAT_M_BEDONLY = _UxGT("預熱 $ 熱床"); //MSG_PREHEAT_1 " Bed" PROGMEM Language_Str MSG_PREHEAT_M_SETTINGS = _UxGT("預熱 $ 設置"); //MSG_PREHEAT_1 " conf" #endif - PROGMEM Language_Str MSG_PREHEAT_CUSTOM = _UxGT("自定預熱"); //"Preheat Custom" - PROGMEM Language_Str MSG_COOLDOWN = _UxGT("降溫"); //"Cooldown" - PROGMEM Language_Str MSG_LASER_MENU = _UxGT("激光控制"); //"Laser Control" - PROGMEM Language_Str MSG_LASER_POWER = _UxGT("激光電源"); //"Laser Power" - PROGMEM Language_Str MSG_SPINDLE_MENU = _UxGT("主軸控告制"); //"Spindle Control" - PROGMEM Language_Str MSG_SPINDLE_POWER = _UxGT("主軸電源"); //"Spindle Power" - PROGMEM Language_Str MSG_SPINDLE_REVERSE = _UxGT("主軸反轉"); //"Spindle Reverse" - PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT("電源打開"); //"Switch power on" - PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT("電源關閉"); //"Switch power off" - PROGMEM Language_Str MSG_EXTRUDE = _UxGT("擠出"); //"Extrude" - PROGMEM Language_Str MSG_RETRACT = _UxGT("回縮"); //"Retract" - PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("移動軸"); //"Move axis" - PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("調平熱床"); //"Bed leveling" - PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("調平熱床"); //"Level bed" + PROGMEM Language_Str MSG_PREHEAT_CUSTOM = _UxGT("自定預熱"); // "Preheat Custom" + PROGMEM Language_Str MSG_COOLDOWN = _UxGT("降溫"); // "Cooldown" + PROGMEM Language_Str MSG_LASER_MENU = _UxGT("激光控制"); // "Laser Control" + PROGMEM Language_Str MSG_LASER_POWER = _UxGT("激光電源"); // "Laser Power" + PROGMEM Language_Str MSG_SPINDLE_MENU = _UxGT("主軸控告制"); // "Spindle Control" + PROGMEM Language_Str MSG_SPINDLE_POWER = _UxGT("主軸電源"); // "Spindle Power" + PROGMEM Language_Str MSG_SPINDLE_REVERSE = _UxGT("主軸反轉"); // "Spindle Reverse" + PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT("電源打開"); // "Switch power on" + PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT("電源關閉"); // "Switch power off" + PROGMEM Language_Str MSG_EXTRUDE = _UxGT("擠出"); // "Extrude" + PROGMEM Language_Str MSG_RETRACT = _UxGT("回縮"); // "Retract" + PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("移動軸"); // "Move axis" + PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("調平熱床"); // "Bed leveling" + PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("調平熱床"); // "Level bed" PROGMEM Language_Str MSG_BED_TRAMMING = _UxGT("調平邊角"); // "Bed Tramming" PROGMEM Language_Str MSG_NEXT_CORNER = _UxGT("下個邊角"); // "Next corner" - PROGMEM Language_Str MSG_MESH_EDITOR = _UxGT("網格編輯器"); //"Mesh Editor" + PROGMEM Language_Str MSG_MESH_EDITOR = _UxGT("網格編輯器"); // "Mesh Editor" PROGMEM Language_Str MSG_EDIT_MESH = _UxGT("編輯網格"); // "Edit Mesh" PROGMEM Language_Str MSG_EDITING_STOPPED = _UxGT("網格編輯已停止"); // "Mesh Editing Stopped" - PROGMEM Language_Str MSG_PROBING_MESH = _UxGT("探測點"); //"Probing Point" - PROGMEM Language_Str MSG_MESH_X = _UxGT("索引 X"); //"Index X" - PROGMEM Language_Str MSG_MESH_Y = _UxGT("索引 Y"); //"Index Y" - PROGMEM Language_Str MSG_MESH_EDIT_Z = _UxGT("Z 值"); //"Z Value" + PROGMEM Language_Str MSG_PROBING_MESH = _UxGT("探測點"); // "Probing Point" + PROGMEM Language_Str MSG_MESH_X = _UxGT("索引 X"); // "Index X" + PROGMEM Language_Str MSG_MESH_Y = _UxGT("索引 Y"); // "Index Y" + PROGMEM Language_Str MSG_MESH_EDIT_Z = _UxGT("Z 值"); // "Z Value" PROGMEM Language_Str MSG_CUSTOM_COMMANDS = _UxGT("自定命令"); // "Custom Commands" - PROGMEM Language_Str MSG_M48_TEST = _UxGT("M48 探測測試"); //"M48 Probe Test" - PROGMEM Language_Str MSG_M48_POINT = _UxGT("M48 探測點"); //"M48 Point" - PROGMEM Language_Str MSG_M48_DEVIATION = _UxGT("偏差"); //"Deviation" + PROGMEM Language_Str MSG_M48_TEST = _UxGT("M48 探測測試"); // "M48 Probe Test" + PROGMEM Language_Str MSG_M48_POINT = _UxGT("M48 探測點"); // "M48 Point" + PROGMEM Language_Str MSG_M48_DEVIATION = _UxGT("偏差"); // "Deviation" PROGMEM Language_Str MSG_IDEX_MENU = _UxGT("IDEX Mode"); PROGMEM Language_Str MSG_OFFSETS_MENU = _UxGT("Tool Offsets"); PROGMEM Language_Str MSG_IDEX_MODE_AUTOPARK = _UxGT("Auto-Park"); @@ -123,7 +123,7 @@ namespace Language_zh_TW { PROGMEM Language_Str MSG_UBL_DOING_G29 = _UxGT("執行G29"); // "Doing G29" PROGMEM Language_Str MSG_UBL_TOOLS = _UxGT("UBL工具"); // "UBL Tools" PROGMEM Language_Str MSG_UBL_LEVEL_BED = _UxGT("統一熱床調平(UBL)"); // "Unified Bed Leveling" - PROGMEM Language_Str MSG_LCD_TILTING_MESH = _UxGT("傾斜點"); //"Tilting Point" + PROGMEM Language_Str MSG_LCD_TILTING_MESH = _UxGT("傾斜點"); // "Tilting Point" PROGMEM Language_Str MSG_UBL_MANUAL_MESH = _UxGT("手工建網"); // "Manually Build Mesh" PROGMEM Language_Str MSG_UBL_BC_INSERT = _UxGT("放置墊片並測量"); // "Place shim & measure" PROGMEM Language_Str MSG_UBL_BC_INSERT2 = _UxGT("測量"); // "Measure" @@ -132,9 +132,9 @@ namespace Language_zh_TW { PROGMEM Language_Str MSG_UBL_ACTIVATE_MESH = _UxGT("啟動UBL"); // "Activate UBL" PROGMEM Language_Str MSG_UBL_DEACTIVATE_MESH = _UxGT("關閉UBL"); // "Deactivate UBL" PROGMEM Language_Str MSG_UBL_SET_TEMP_BED = _UxGT("置設熱床溫度"); // "Bed Temp" - PROGMEM Language_Str MSG_UBL_BED_TEMP_CUSTOM = _UxGT("置設熱床溫度"); //"Bed Temp") + PROGMEM Language_Str MSG_UBL_BED_TEMP_CUSTOM = _UxGT("置設熱床溫度"); // "Bed Temp") PROGMEM Language_Str MSG_UBL_SET_TEMP_HOTEND = _UxGT("置設噴嘴溫度"); // "Hotend Temp" - PROGMEM Language_Str MSG_UBL_HOTEND_TEMP_CUSTOM = _UxGT("熱端溫度"); //"Hotend Temp" + PROGMEM Language_Str MSG_UBL_HOTEND_TEMP_CUSTOM = _UxGT("熱端溫度"); // "Hotend Temp" PROGMEM Language_Str MSG_UBL_MESH_EDIT = _UxGT("網格編輯"); // "Mesh Edit" PROGMEM Language_Str MSG_UBL_EDIT_CUSTOM_MESH = _UxGT("編輯客戶網格"); // "Edit Custom Mesh" PROGMEM Language_Str MSG_UBL_FINE_TUNE_MESH = _UxGT("細調網格"); // "Fine Tuning Mesh" @@ -150,13 +150,13 @@ namespace Language_zh_TW { PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("高度合計"); // "Height Amount" PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_MENU = _UxGT("批准網格"); // "Validate Mesh" PROGMEM Language_Str MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("批准客戶網格"); // "Validate Custom Mesh" - PROGMEM Language_Str MSG_G26_HEATING_BED = _UxGT("G26 加熱熱床"); //"G26 Heating Bed" + PROGMEM Language_Str MSG_G26_HEATING_BED = _UxGT("G26 加熱熱床"); // "G26 Heating Bed" PROGMEM Language_Str MSG_G26_HEATING_NOZZLE = _UxGT("G26 加熱噴嘴"); //"G26 Heating Nozzle" - PROGMEM Language_Str MSG_G26_MANUAL_PRIME = _UxGT("手動填裝"); //"Manual priming..." - PROGMEM Language_Str MSG_G26_FIXED_LENGTH = _UxGT("固定距離填裝"); //"Fixed Length Prime" - PROGMEM Language_Str MSG_G26_PRIME_DONE = _UxGT("完成填裝"); //"Done Priming" - PROGMEM Language_Str MSG_G26_CANCELED = _UxGT("G26已取消"); //"G26 Canceled" - PROGMEM Language_Str MSG_G26_LEAVING = _UxGT("離開 G26"); //"Leaving G26" + PROGMEM Language_Str MSG_G26_MANUAL_PRIME = _UxGT("手動填裝"); // "Manual priming..." + PROGMEM Language_Str MSG_G26_FIXED_LENGTH = _UxGT("固定距離填裝"); // "Fixed Length Prime" + PROGMEM Language_Str MSG_G26_PRIME_DONE = _UxGT("完成填裝"); // "Done Priming" + PROGMEM Language_Str MSG_G26_CANCELED = _UxGT("G26已取消"); // "G26 Canceled" + PROGMEM Language_Str MSG_G26_LEAVING = _UxGT("離開 G26"); // "Leaving G26" PROGMEM Language_Str MSG_UBL_CONTINUE_MESH = _UxGT("繼續熱床網格"); // "Continue Bed Mesh" PROGMEM Language_Str MSG_UBL_MESH_LEVELING = _UxGT("網格調平"); // "Mesh Leveling" PROGMEM Language_Str MSG_UBL_3POINT_MESH_LEVELING = _UxGT("三點調平"); // "3-Point Leveling" @@ -186,7 +186,7 @@ namespace Language_zh_TW { PROGMEM Language_Str MSG_UBL_NO_STORAGE = _UxGT("沒有存儲"); // "No storage" PROGMEM Language_Str MSG_UBL_SAVE_ERROR = _UxGT("錯誤: UBL保存"); // "Err: UBL Save" PROGMEM Language_Str MSG_UBL_RESTORE_ERROR = _UxGT("錯誤: UBL還原"); // "Err: UBL Restore" - PROGMEM Language_Str MSG_UBL_Z_OFFSET = _UxGT("Z-偏移:"); //"Z-Offset: " + PROGMEM Language_Str MSG_UBL_Z_OFFSET = _UxGT("Z-偏移:"); // "Z-Offset: " PROGMEM Language_Str MSG_UBL_Z_OFFSET_STOPPED = _UxGT("Z偏移已停止"); // "Z-Offset Stopped" PROGMEM Language_Str MSG_UBL_STEP_BY_STEP_MENU = _UxGT("一步步UBL"); // "Step-By-Step UBL" PROGMEM Language_Str MSG_UBL_1_BUILD_COLD_MESH = _UxGT("1. 創設冷網格"); @@ -218,148 +218,160 @@ namespace Language_zh_TW { PROGMEM Language_Str MSG_MOVING = _UxGT("移動 ..."); // "Moving...") PROGMEM Language_Str MSG_FREE_XY = _UxGT("釋放 XY"); // "Free XY") - PROGMEM Language_Str MSG_MOVE_X = _UxGT("移動X"); //"Move X" - PROGMEM Language_Str MSG_MOVE_Y = _UxGT("移動Y"); //"Move Y" - PROGMEM Language_Str MSG_MOVE_Z = _UxGT("移動Z"); //"Move Z" - PROGMEM Language_Str MSG_MOVE_E = _UxGT("擠出機"); //"Extruder" - PROGMEM Language_Str MSG_MOVE_EN = _UxGT("擠出機 *"); //"Extruder *" - PROGMEM Language_Str MSG_HOTEND_TOO_COLD = _UxGT("噴嘴溫度不夠"); //"Hotend too cold" - PROGMEM Language_Str MSG_MOVE_N_MM = _UxGT("移動 %s mm"); //"Move 0.025mm" - PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("移動 0.1 mm"); //"Move 0.1mm" - PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("移動 1 mm"); //"Move 1mm" - PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("移動 10 mm"); //"Move 10mm" - PROGMEM Language_Str MSG_MOVE_100MM = _UxGT("移動 100 mm"); //"Move 100mm" - PROGMEM Language_Str MSG_SPEED = _UxGT("速率"); //"Speed" - PROGMEM Language_Str MSG_BED_Z = _UxGT("熱床Z"); //"Bed Z" - PROGMEM Language_Str MSG_NOZZLE = " " LCD_STR_THERMOMETER _UxGT(" 噴嘴"); //"Nozzle" 噴嘴 + PROGMEM Language_Str MSG_MOVE_X = _UxGT("移動X"); // "Move X" + PROGMEM Language_Str MSG_MOVE_Y = _UxGT("移動Y"); // "Move Y" + PROGMEM Language_Str MSG_MOVE_Z = _UxGT("移動Z"); // "Move Z" + PROGMEM Language_Str MSG_MOVE_E = _UxGT("擠出機"); // "Extruder" + PROGMEM Language_Str MSG_MOVE_EN = _UxGT("擠出機 *"); // "Extruder *" + PROGMEM Language_Str MSG_HOTEND_TOO_COLD = _UxGT("噴嘴溫度不夠"); // "Hotend too cold" + PROGMEM Language_Str MSG_MOVE_N_MM = _UxGT("移動 %s mm"); // "Move 0.025mm" + PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("移動 0.1 mm"); // "Move 0.1mm" + PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("移動 1 mm"); // "Move 1mm" + PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("移動 10 mm"); // "Move 10mm" + PROGMEM Language_Str MSG_MOVE_100MM = _UxGT("移動 100 mm"); // "Move 100mm" + PROGMEM Language_Str MSG_SPEED = _UxGT("速率"); // "Speed" + PROGMEM Language_Str MSG_BED_Z = _UxGT("熱床Z"); // "Bed Z" + PROGMEM Language_Str MSG_NOZZLE = " " LCD_STR_THERMOMETER _UxGT(" 噴嘴"); // "Nozzle" 噴嘴 PROGMEM Language_Str MSG_NOZZLE_N = " " LCD_STR_THERMOMETER _UxGT(" 噴嘴 ~"); - PROGMEM Language_Str MSG_BED = " " LCD_STR_THERMOMETER _UxGT(" 熱床"); //"Bed" + PROGMEM Language_Str MSG_BED = " " LCD_STR_THERMOMETER _UxGT(" 熱床"); // "Bed" PROGMEM Language_Str MSG_CHAMBER = _UxGT("Enclosure"); - PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("風扇速率"); //"Fan speed" + PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("風扇速率"); // "Fan speed" PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("風扇速率 ="); PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Stored Fan ="); PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("額外風扇速率"); // "Extra fan speed" PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("額外風扇速率 ="); PROGMEM Language_Str MSG_FLOW = _UxGT("擠出速率"); - PROGMEM Language_Str MSG_FLOW_N = _UxGT("擠出速率 ~"); //"Flow" - PROGMEM Language_Str MSG_CONTROL = _UxGT("控制"); //"Control" - PROGMEM Language_Str MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" 最小"); //" " LCD_STR_THERMOMETER " Min" - PROGMEM Language_Str MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" 最大"); //" " LCD_STR_THERMOMETER " Max" - PROGMEM Language_Str MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" 系數"); //" " LCD_STR_THERMOMETER " Fact" - PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("自動控溫"); //"Autotemp" - PROGMEM Language_Str MSG_LCD_ON = _UxGT("開 "); //"On" - PROGMEM Language_Str MSG_LCD_OFF = _UxGT("關 "); //"Off" + PROGMEM Language_Str MSG_FLOW_N = _UxGT("擠出速率 ~"); // "Flow" + PROGMEM Language_Str MSG_CONTROL = _UxGT("控制"); // "Control" + PROGMEM Language_Str MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" 最小"); // " " LCD_STR_THERMOMETER " Min" + PROGMEM Language_Str MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" 最大"); // " " LCD_STR_THERMOMETER " Max" + PROGMEM Language_Str MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" 系數"); // " " LCD_STR_THERMOMETER " Fact" + PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("自動控溫"); // "Autotemp" + PROGMEM Language_Str MSG_LCD_ON = _UxGT("開 "); // "On" + PROGMEM Language_Str MSG_LCD_OFF = _UxGT("關 "); // "Off" - PROGMEM Language_Str MSG_SELECT = _UxGT("選擇"); //"Select" + PROGMEM Language_Str MSG_SELECT = _UxGT("選擇"); // "Select" PROGMEM Language_Str MSG_SELECT_E = _UxGT("選擇 *"); - PROGMEM Language_Str MSG_ACC = _UxGT("加速度"); //"Accel" acceleration - PROGMEM Language_Str MSG_JERK = _UxGT("抖動速率"); //"Jerk" - PROGMEM Language_Str MSG_VA_JERK = _UxGT("軸抖動速率") LCD_STR_A; //"Va-jerk" - PROGMEM Language_Str MSG_VB_JERK = _UxGT("軸抖動速率") LCD_STR_B; //"Vb-jerk" - PROGMEM Language_Str MSG_VC_JERK = _UxGT("軸抖動速率") LCD_STR_C; //"Vc-jerk" - PROGMEM Language_Str MSG_VE_JERK = _UxGT("擠出機抖動速率"); //"Ve-jerk" + PROGMEM Language_Str MSG_ACC = _UxGT("加速度"); // "Accel" acceleration + PROGMEM Language_Str MSG_JERK = _UxGT("抖動速率"); // "Jerk" + PROGMEM Language_Str MSG_VA_JERK = _UxGT("軸抖動速率") LCD_STR_A; // "Va-jerk" + PROGMEM Language_Str MSG_VB_JERK = _UxGT("軸抖動速率") LCD_STR_B; + PROGMEM Language_Str MSG_VC_JERK = _UxGT("軸抖動速率") LCD_STR_C; + PROGMEM Language_Str MSG_VI_JERK = _UxGT("軸抖動速率") LCD_STR_I; + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("軸抖動速率") LCD_STR_J; + PROGMEM Language_Str MSG_VK_JERK = _UxGT("軸抖動速率") LCD_STR_K; + PROGMEM Language_Str MSG_VE_JERK = _UxGT("擠出機抖動速率"); PROGMEM Language_Str MSG_VELOCITY = _UxGT("速度"); // "Velocity" - PROGMEM Language_Str MSG_VMAX_A = _UxGT("最大進料速率") LCD_STR_A; //"Vmax " max_feedrate_mm_s + PROGMEM Language_Str MSG_VMAX_A = _UxGT("最大進料速率") LCD_STR_A; // "Vmax " max_feedrate_mm_s PROGMEM Language_Str MSG_VMAX_B = _UxGT("最大進料速率") LCD_STR_B; PROGMEM Language_Str MSG_VMAX_C = _UxGT("最大進料速率") LCD_STR_C; + PROGMEM Language_Str MSG_VMAX_I = _UxGT("最大進料速率") LCD_STR_I; + PROGMEM Language_Str MSG_VMAX_J = _UxGT("最大進料速率") LCD_STR_J; + PROGMEM Language_Str MSG_VMAX_K = _UxGT("最大進料速率") LCD_STR_K; PROGMEM Language_Str MSG_VMAX_E = _UxGT("最大進料速率") LCD_STR_E; - PROGMEM Language_Str MSG_VMAX_EN = _UxGT("最大進料速率 *"); //"Vmax " max_feedrate_mm_s - PROGMEM Language_Str MSG_VMIN = _UxGT("最小進料速率"); //"Vmin" min_feedrate_mm_s - PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("最小移動速率"); //"VTrav min" min_travel_feedrate_mm_s, (target) speed of the move + PROGMEM Language_Str MSG_VMAX_EN = _UxGT("最大進料速率 *"); // "Vmax " max_feedrate_mm_s + PROGMEM Language_Str MSG_VMIN = _UxGT("最小進料速率"); // "Vmin" min_feedrate_mm_s + PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("最小移動速率"); // "VTrav min" min_travel_feedrate_mm_s, (target) speed of the move PROGMEM Language_Str MSG_ACCELERATION = _UxGT("加速度"); // "Acceleration" - PROGMEM Language_Str MSG_AMAX_A = _UxGT("最大列印加速度") LCD_STR_A; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves + PROGMEM Language_Str MSG_AMAX_A = _UxGT("最大列印加速度") LCD_STR_A; // "Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves PROGMEM Language_Str MSG_AMAX_B = _UxGT("最大列印加速度") LCD_STR_B; PROGMEM Language_Str MSG_AMAX_C = _UxGT("最大列印加速度") LCD_STR_C; + PROGMEM Language_Str MSG_AMAX_I = _UxGT("最大列印加速度") LCD_STR_I; + PROGMEM Language_Str MSG_AMAX_J = _UxGT("最大列印加速度") LCD_STR_J; + PROGMEM Language_Str MSG_AMAX_K = _UxGT("最大列印加速度") LCD_STR_K; PROGMEM Language_Str MSG_AMAX_E = _UxGT("最大列印加速度") LCD_STR_E; - PROGMEM Language_Str MSG_AMAX_EN = _UxGT("最大列印加速度 *"); //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves - PROGMEM Language_Str MSG_A_RETRACT = _UxGT("回縮加速度"); //"A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts - PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("非列印移動加速度"); //"A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves - PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("軸步數/mm"); //"Steps/mm" axis_steps_per_mm, axis steps-per-unit G92 - PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT("軸步數/mm"); //"Asteps/mm" axis_steps_per_mm, axis steps-per-unit G92 - PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT("軸步數/mm"); - PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT("軸步數/mm"); - PROGMEM Language_Str MSG_E_STEPS = _UxGT("擠出機步數/mm"); //"Esteps/mm" + PROGMEM Language_Str MSG_AMAX_EN = _UxGT("最大列印加速度 *"); // "Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves + PROGMEM Language_Str MSG_A_RETRACT = _UxGT("回縮加速度"); // "A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts + PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("非列印移動加速度"); // "A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves + PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("軸步數/mm"); // "Steps/mm" axis_steps_per_mm, axis steps-per-unit G92 + PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" 軸步數/mm"); // "Asteps/mm" axis_steps_per_mm, axis steps-per-unit G92 + PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" 軸步數/mm"); + PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" 軸步數/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" 軸步數/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" 軸步數/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" 軸步數/mm"); + PROGMEM Language_Str MSG_E_STEPS = _UxGT("擠出機步數/mm"); // "Esteps/mm" PROGMEM Language_Str MSG_EN_STEPS = _UxGT("擠出機~步數/mm"); - PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("溫度"); //"Temperature" - PROGMEM Language_Str MSG_MOTION = _UxGT("運作"); //"Motion" - PROGMEM Language_Str MSG_FILAMENT = _UxGT("絲料測容"); //"Filament" menu_control_volumetric - PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("測容積mm") SUPERSCRIPT_THREE; //"E in mm3" volumetric_enabled - PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("絲料直徑"); //"Fil. Dia." + PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("溫度"); // "Temperature" + PROGMEM Language_Str MSG_MOTION = _UxGT("運作"); // "Motion" + PROGMEM Language_Str MSG_FILAMENT = _UxGT("絲料測容"); // "Filament" menu_control_volumetric + PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("測容積mm") SUPERSCRIPT_THREE; // "E in mm3" volumetric_enabled + PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("絲料直徑"); // "Fil. Dia." PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT("絲料直徑 *"); PROGMEM Language_Str MSG_FILAMENT_UNLOAD = _UxGT("卸載 mm"); // "Unload mm" PROGMEM Language_Str MSG_FILAMENT_LOAD = _UxGT("装載 mm"); // "Load mm" PROGMEM Language_Str MSG_ADVANCE_K = _UxGT("Advance K"); PROGMEM Language_Str MSG_ADVANCE_K_E = _UxGT("Advance K *"); - PROGMEM Language_Str MSG_CONTRAST = _UxGT("LCD對比度"); //"LCD contrast" - PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("保存設置"); //"Store memory" - PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("載入設置"); //"Load memory" - PROGMEM Language_Str MSG_RESTORE_DEFAULTS = _UxGT("恢復安全值"); //"Restore failsafe" + PROGMEM Language_Str MSG_CONTRAST = _UxGT("LCD對比度"); // "LCD contrast" + PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("保存設置"); // "Store memory" + PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("載入設置"); // "Load memory" + PROGMEM Language_Str MSG_RESTORE_DEFAULTS = _UxGT("恢復安全值"); // "Restore failsafe" PROGMEM Language_Str MSG_INIT_EEPROM = _UxGT("初始化設置"); // "Initialize EEPROM" - PROGMEM Language_Str MSG_ERR_EEPROM_CRC = _UxGT("錯誤: EEPROM CRC"); //"Err: EEPROM CRC" - PROGMEM Language_Str MSG_ERR_EEPROM_INDEX = _UxGT("錯誤: EEPROM Index"); //"Err: EEPROM Index" - PROGMEM Language_Str MSG_ERR_EEPROM_VERSION = _UxGT("錯誤: EEPROM Version"); //"EEPROM Version" - PROGMEM Language_Str MSG_MEDIA_UPDATE = _UxGT("媒體更新"); //"Media Update" - PROGMEM Language_Str MSG_RESET_PRINTER = _UxGT("重置打印機"); //"Reset Printer - PROGMEM Language_Str MSG_REFRESH = _UxGT("刷新"); //"Refresh" - PROGMEM Language_Str MSG_INFO_SCREEN = _UxGT("資訊界面"); //"Info screen" - PROGMEM Language_Str MSG_PREPARE = _UxGT("準備"); //"Prepare" - PROGMEM Language_Str MSG_TUNE = _UxGT("調整"); //"Tune" - PROGMEM Language_Str MSG_START_PRINT = _UxGT("開始列印"); //"Start Print" - PROGMEM Language_Str MSG_BUTTON_NEXT = _UxGT("下一個"); //"Next" - PROGMEM Language_Str MSG_BUTTON_INIT = _UxGT("初始 "); //"Init" - PROGMEM Language_Str MSG_BUTTON_STOP = _UxGT("停止 "); //"Stop" - PROGMEM Language_Str MSG_BUTTON_PRINT = _UxGT("列印 "); //"Print" - PROGMEM Language_Str MSG_BUTTON_RESET = _UxGT("復歸 "); //"Reset" - PROGMEM Language_Str MSG_BUTTON_CANCEL = _UxGT("放棄 "); //"Cancel" - PROGMEM Language_Str MSG_BUTTON_DONE = _UxGT("確認 "); //"Done" - PROGMEM Language_Str MSG_BUTTON_BACK = _UxGT("返回 "); //"Back" - PROGMEM Language_Str MSG_BUTTON_PROCEED = _UxGT("繼續 "); //"Proceed" - PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("暫停列印"); //"Pause print" - PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("恢復列印"); //"Resume print" - PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("停止列印"); //"Stop print" - PROGMEM Language_Str MSG_PRINTING_OBJECT = _UxGT("列印物件"); //"Printing Object" - PROGMEM Language_Str MSG_CANCEL_OBJECT = _UxGT("中止物件"); //"Cancel Object" - PROGMEM Language_Str MSG_CANCEL_OBJECT_N = _UxGT("中止物件 ="); //"Cancel Object =" - PROGMEM Language_Str MSG_OUTAGE_RECOVERY = _UxGT("中斷恢復"); //"Outage Recovery" - PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("從記憶卡上列印"); //"Print from SD" - PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("無記憶卡"); //"No SD card" - PROGMEM Language_Str MSG_DWELL = _UxGT("休眠 ..."); //"Sleep..." - PROGMEM Language_Str MSG_USERWAIT = _UxGT("點擊繼續 ..."); //"Click to resume..." + PROGMEM Language_Str MSG_ERR_EEPROM_CRC = _UxGT("錯誤: EEPROM CRC"); // "Err: EEPROM CRC" + PROGMEM Language_Str MSG_ERR_EEPROM_INDEX = _UxGT("錯誤: EEPROM Index"); // "Err: EEPROM Index" + PROGMEM Language_Str MSG_ERR_EEPROM_VERSION = _UxGT("錯誤: EEPROM Version"); // "EEPROM Version" + PROGMEM Language_Str MSG_MEDIA_UPDATE = _UxGT("媒體更新"); // "Media Update" + PROGMEM Language_Str MSG_RESET_PRINTER = _UxGT("重置打印機"); // "Reset Printer + PROGMEM Language_Str MSG_REFRESH = _UxGT("刷新"); // "Refresh" + PROGMEM Language_Str MSG_INFO_SCREEN = _UxGT("資訊界面"); // "Info screen" + PROGMEM Language_Str MSG_PREPARE = _UxGT("準備"); // "Prepare" + PROGMEM Language_Str MSG_TUNE = _UxGT("調整"); // "Tune" + PROGMEM Language_Str MSG_START_PRINT = _UxGT("開始列印"); // "Start Print" + PROGMEM Language_Str MSG_BUTTON_NEXT = _UxGT("下一個"); // "Next" + PROGMEM Language_Str MSG_BUTTON_INIT = _UxGT("初始 "); // "Init" + PROGMEM Language_Str MSG_BUTTON_STOP = _UxGT("停止 "); // "Stop" + PROGMEM Language_Str MSG_BUTTON_PRINT = _UxGT("列印 "); // "Print" + PROGMEM Language_Str MSG_BUTTON_RESET = _UxGT("復歸 "); // "Reset" + PROGMEM Language_Str MSG_BUTTON_CANCEL = _UxGT("放棄 "); // "Cancel" + PROGMEM Language_Str MSG_BUTTON_DONE = _UxGT("確認 "); // "Done" + PROGMEM Language_Str MSG_BUTTON_BACK = _UxGT("返回 "); // "Back" + PROGMEM Language_Str MSG_BUTTON_PROCEED = _UxGT("繼續 "); // "Proceed" + PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("暫停列印"); // "Pause print" + PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("恢復列印"); // "Resume print" + PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("停止列印"); // "Stop print" + PROGMEM Language_Str MSG_PRINTING_OBJECT = _UxGT("列印物件"); // "Printing Object" + PROGMEM Language_Str MSG_CANCEL_OBJECT = _UxGT("中止物件"); // "Cancel Object" + PROGMEM Language_Str MSG_CANCEL_OBJECT_N = _UxGT("中止物件 ="); // "Cancel Object =" + PROGMEM Language_Str MSG_OUTAGE_RECOVERY = _UxGT("中斷恢復"); // "Outage Recovery" + PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("從記憶卡上列印"); // "Print from SD" + PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("無記憶卡"); // "No SD card" + PROGMEM Language_Str MSG_DWELL = _UxGT("休眠 ..."); // "Sleep..." + PROGMEM Language_Str MSG_USERWAIT = _UxGT("點擊繼續 ..."); // "Click to resume..." PROGMEM Language_Str MSG_PRINT_PAUSED = _UxGT("列印已暫停"); // "Print paused" - PROGMEM Language_Str MSG_PRINTING = _UxGT("列印中 ..."); //"Printing..." - PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("已取消列印"); //"Print aborted" - PROGMEM Language_Str MSG_NO_MOVE = _UxGT("無移動"); //"No move." - PROGMEM Language_Str MSG_KILLED = _UxGT("已砍掉"); //"KILLED. " - PROGMEM Language_Str MSG_STOPPED = _UxGT("已停止"); //"STOPPED. " - PROGMEM Language_Str MSG_CONTROL_RETRACT = _UxGT("回縮長度mm"); //"Retract mm" retract_length, retract length (positive mm) - PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP = _UxGT("換手回抽長度mm"); //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change - PROGMEM Language_Str MSG_CONTROL_RETRACTF = _UxGT("回縮速率mm/s"); //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) - PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); //"Hop mm" retract_zraise, retract Z-lift - PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER = _UxGT("回縮恢復長度mm"); //"UnRet +mm" retract_recover_extra, additional recover length (mm, added to retract length when recovering) - PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("換手回縮恢復長度mm"); //"S UnRet+mm" swap_retract_recover_extra, additional swap recover length (mm, added to retract length when recovering from extruder change) - PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT("回縮恢復後進料速率mm/s"); //"Unretract V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) + PROGMEM Language_Str MSG_PRINTING = _UxGT("列印中 ..."); // "Printing..." + PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("已取消列印"); // "Print aborted" + PROGMEM Language_Str MSG_NO_MOVE = _UxGT("無移動"); // "No move." + PROGMEM Language_Str MSG_KILLED = _UxGT("已砍掉"); // "KILLED. " + PROGMEM Language_Str MSG_STOPPED = _UxGT("已停止"); // "STOPPED. " + PROGMEM Language_Str MSG_CONTROL_RETRACT = _UxGT("回縮長度mm"); // "Retract mm" retract_length, retract length (positive mm) + PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP = _UxGT("換手回抽長度mm"); // "Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change + PROGMEM Language_Str MSG_CONTROL_RETRACTF = _UxGT("回縮速率mm/s"); // "Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) + PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); // "Hop mm" retract_zraise, retract Z-lift + PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER = _UxGT("回縮恢復長度mm"); // "UnRet +mm" retract_recover_extra, additional recover length (mm, added to retract length when recovering) + PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("換手回縮恢復長度mm"); // "S UnRet+mm" swap_retract_recover_extra, additional swap recover length (mm, added to retract length when recovering from extruder change) + PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT("回縮恢復後進料速率mm/s"); // "Unretract V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("S UnRet V"); // "S UnRet V" - PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("自動回縮"); //"Auto-Retract" autoretract_enabled, - PROGMEM Language_Str MSG_FILAMENT_SWAP_LENGTH = _UxGT("交換長度"); //"Swap Length" - PROGMEM Language_Str MSG_FILAMENT_PURGE_LENGTH = _UxGT("清除長度"); //"Purge Length" + PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("自動回縮"); // "Auto-Retract" autoretract_enabled, + PROGMEM Language_Str MSG_FILAMENT_SWAP_LENGTH = _UxGT("交換長度"); // "Swap Length" + PROGMEM Language_Str MSG_FILAMENT_PURGE_LENGTH = _UxGT("清除長度"); // "Purge Length" PROGMEM Language_Str MSG_TOOL_CHANGE = _UxGT("交換工具"); //"Tool Change" - PROGMEM Language_Str MSG_TOOL_CHANGE_ZLIFT = _UxGT("Z軸提昇"); //"Z Raise" - PROGMEM Language_Str MSG_SINGLENOZZLE_PRIME_SPEED = _UxGT("最高速度"); //"Prime Speed" - PROGMEM Language_Str MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT("收回速度"); //"Retract Speed" + PROGMEM Language_Str MSG_TOOL_CHANGE_ZLIFT = _UxGT("Z軸提昇"); // "Z Raise" + PROGMEM Language_Str MSG_SINGLENOZZLE_PRIME_SPEED = _UxGT("最高速度"); // "Prime Speed" + PROGMEM Language_Str MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT("收回速度"); // "Retract Speed" PROGMEM Language_Str MSG_NOZZLE_STANDBY = _UxGT("噴嘴待機"); //"Nozzle Standby" - PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("更換絲料"); //"Change filament" + PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("更換絲料"); // "Change filament" PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("更換絲料 *"); PROGMEM Language_Str MSG_FILAMENTLOAD = _UxGT("裝載絲料"); // "Load filament" PROGMEM Language_Str MSG_FILAMENTLOAD_E = _UxGT("裝載絲料 *"); PROGMEM Language_Str MSG_FILAMENTUNLOAD = _UxGT("卸載絲料"); // "Unload filament" PROGMEM Language_Str MSG_FILAMENTUNLOAD_E = _UxGT("卸載絲料 *"); // "Unload filament" PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL = _UxGT("卸載全部"); // "Unload All" - PROGMEM Language_Str MSG_INIT_MEDIA = _UxGT("初始化記憶卡"); //"Init. SD card" - PROGMEM Language_Str MSG_ATTACH_MEDIA = _UxGT("連接記憶卡"); //"Attach Media - PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("更換記憶卡"); //"Change SD card" - PROGMEM Language_Str MSG_RELEASE_MEDIA = _UxGT("釋放媒體"); //"Release Media" - PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z探針在熱床之外"); //"Z probe out. bed" Z probe is not within the physical limits + PROGMEM Language_Str MSG_INIT_MEDIA = _UxGT("初始化記憶卡"); // "Init. SD card" + PROGMEM Language_Str MSG_ATTACH_MEDIA = _UxGT("連接記憶卡"); // "Attach Media + PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("更換記憶卡"); // "Change SD card" + PROGMEM Language_Str MSG_RELEASE_MEDIA = _UxGT("釋放媒體"); // "Release Media" + PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z探針在熱床之外"); // "Z probe out. bed" Z probe is not within the physical limits PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("偏斜因數"); // "Skew Factor" PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch 自檢"); // "BLTouch Self-Test" @@ -367,39 +379,39 @@ namespace Language_zh_TW { PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("裝載BLTouch"); // "Stow BLTouch" PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("部署BLTouch"); // "Deploy BLTouch" - PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("歸位 %s%s%s 先"); //"Home ... first" + PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("歸位 %s%s%s 先"); // "Home ... first" PROGMEM Language_Str MSG_ZPROBE_OFFSETS = _UxGT("探針偏移"); //Probe Offsets PROGMEM Language_Str MSG_ZPROBE_XOFFSET = _UxGT("探針X偏移量"); //Probe X Offset PROGMEM Language_Str MSG_ZPROBE_YOFFSET = _UxGT("探針Y偏移量"); //Probe Y Offset PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("探針Z偏移量"); //Probe Z Offset - PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT("微量調整X軸"); //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts - PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT("微量調整Y軸"); //"Babystep Y" - PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT("微量調整Z軸"); //"Babystep Z" - PROGMEM Language_Str MSG_BABYSTEP_TOTAL = _UxGT("總計"); //"Total" - PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT("擋塊終止"); //"Endstop abort" - PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("加熱失敗"); //"Heating failed" - PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("錯誤：冗餘溫度"); //"Err: REDUNDANT TEMP" - PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("溫度失控"); //"THERMAL RUNAWAY" - PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED = _UxGT("熱床溫度失控"); //"BED THERMAL RUNAWAY" - PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("機箱溫度失控"); //"CHAMBER T. RUNAWAY" - PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("錯誤：最高溫度"); //"Err: MAXTEMP" - PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("錯誤：最低溫度"); //"Err: MINTEMP" - PROGMEM Language_Str MSG_HALTED = _UxGT("印表機停機"); //"PRINTER HALTED" - PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("請重置"); //"Please reset" - PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("天"); //"d" // One character only - PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT("時"); //"h" // One character only - PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT("分"); //"m" // One character only - PROGMEM Language_Str MSG_HEATING = _UxGT("加熱中 ..."); //"Heating..." - PROGMEM Language_Str MSG_COOLING = _UxGT("冷卻中 ..."); //"Cooling..." - PROGMEM Language_Str MSG_BED_HEATING = _UxGT("加熱熱床中 ..."); //"Bed Heating..." - PROGMEM Language_Str MSG_BED_COOLING = _UxGT("熱床冷卻中 ..."); //"Bed Cooling..." - PROGMEM Language_Str MSG_CHAMBER_HEATING = _UxGT("機箱加熱中 .."); //"Chamber Heating..." + PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT("微量調整X軸"); // "Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts + PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT("微量調整Y軸"); // "Babystep Y" + PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT("微量調整Z軸"); // "Babystep Z" + PROGMEM Language_Str MSG_BABYSTEP_TOTAL = _UxGT("總計"); // "Total" + PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT("擋塊終止"); // "Endstop abort" + PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("加熱失敗"); // "Heating failed" + PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("錯誤：冗餘溫度"); // "Err: REDUNDANT TEMP" + PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("溫度失控"); // "THERMAL RUNAWAY" + PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED = _UxGT("熱床溫度失控"); // "BED THERMAL RUNAWAY" + PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("機箱溫度失控"); // "CHAMBER T. RUNAWAY" + PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("錯誤：最高溫度"); // "Err: MAXTEMP" + PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("錯誤：最低溫度"); // "Err: MINTEMP" + PROGMEM Language_Str MSG_HALTED = _UxGT("印表機停機"); // "PRINTER HALTED" + PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("請重置"); // "Please reset" + PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("天"); // "d" // One character only + PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT("時"); // "h" // One character only + PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT("分"); // "m" // One character only + PROGMEM Language_Str MSG_HEATING = _UxGT("加熱中 ..."); // "Heating..." + PROGMEM Language_Str MSG_COOLING = _UxGT("冷卻中 ..."); // "Cooling..." + PROGMEM Language_Str MSG_BED_HEATING = _UxGT("加熱熱床中 ..."); // "Bed Heating..." + PROGMEM Language_Str MSG_BED_COOLING = _UxGT("熱床冷卻中 ..."); // "Bed Cooling..." + PROGMEM Language_Str MSG_CHAMBER_HEATING = _UxGT("機箱加熱中 .."); // "Chamber Heating..." PROGMEM Language_Str MSG_CHAMBER_COOLING = _UxGT("機箱冷卻中 ..."); //Chamber Cooling... - PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("⊿校準"); //"Delta Calibration" - PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("⊿校準X"); //"Calibrate X" - PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("⊿校準Y"); //"Calibrate Y" - PROGMEM Language_Str MSG_DELTA_CALIBRATE_Z = _UxGT("⊿校準Z"); //"Calibrate Z" - PROGMEM Language_Str MSG_DELTA_CALIBRATE_CENTER = _UxGT("⊿校準中心"); //"Calibrate Center" + PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("⊿校準"); // "Delta Calibration" + PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("⊿校準X"); // "Calibrate X" + PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("⊿校準Y"); // "Calibrate Y" + PROGMEM Language_Str MSG_DELTA_CALIBRATE_Z = _UxGT("⊿校準Z"); // "Calibrate Z" + PROGMEM Language_Str MSG_DELTA_CALIBRATE_CENTER = _UxGT("⊿校準中心"); // "Calibrate Center" PROGMEM Language_Str MSG_DELTA_SETTINGS = _UxGT("⊿設置"); // "Delta Settings" PROGMEM Language_Str MSG_DELTA_AUTO_CALIBRATE = _UxGT("⊿自動校準"); // "Auto Calibration" PROGMEM Language_Str MSG_DELTA_HEIGHT_CALIBRATE = _UxGT("設置⊿高度"); // "Set Delta Height" @@ -407,61 +419,63 @@ namespace Language_zh_TW { PROGMEM Language_Str MSG_DELTA_DIAG_ROD = _UxGT("⊿斜柱"); // "Diag Rod" PROGMEM Language_Str MSG_DELTA_HEIGHT = _UxGT("⊿高度"); // "Height" PROGMEM Language_Str MSG_DELTA_RADIUS = _UxGT("⊿半徑"); // "Radius" - PROGMEM Language_Str MSG_INFO_MENU = _UxGT("關於印表機"); //"About Printer" - PROGMEM Language_Str MSG_INFO_PRINTER_MENU = _UxGT("印表機訊息"); //"Printer Info" + PROGMEM Language_Str MSG_INFO_MENU = _UxGT("關於印表機"); // "About Printer" + PROGMEM Language_Str MSG_INFO_PRINTER_MENU = _UxGT("印表機訊息"); // "Printer Info" PROGMEM Language_Str MSG_3POINT_LEVELING = _UxGT("三點調平"); // "3-Point Leveling" PROGMEM Language_Str MSG_LINEAR_LEVELING = _UxGT("線性調平"); // "Linear Leveling" PROGMEM Language_Str MSG_BILINEAR_LEVELING = _UxGT(" 雙線性調平"); // "Bilinear Leveling" PROGMEM Language_Str MSG_UBL_LEVELING = _UxGT("統一熱床調平(UBL)"); // "Unified Bed Leveling" PROGMEM Language_Str MSG_MESH_LEVELING = _UxGT("網格調平"); // "Mesh Leveling" - PROGMEM Language_Str MSG_INFO_STATS_MENU = _UxGT("印表機統計"); //"Printer Stats" - PROGMEM Language_Str MSG_INFO_BOARD_MENU = _UxGT("主板訊息"); //"Board Info" - PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU = _UxGT("溫度計"); //"Thermistors" - PROGMEM Language_Str MSG_INFO_EXTRUDERS = _UxGT(" 擠出機"); //"Extruders" - PROGMEM Language_Str MSG_INFO_BAUDRATE = _UxGT("傳輸率"); //"Baud" - PROGMEM Language_Str MSG_INFO_PROTOCOL = _UxGT("協議"); //"Protocol" - PROGMEM Language_Str MSG_INFO_RUNAWAY_OFF = _UxGT("監測溫度失控:關"); //"Runaway Watch: OFF" - PROGMEM Language_Str MSG_INFO_RUNAWAY_ON = _UxGT("監測溫度失控:開"); //"Runaway Watch: ON" + PROGMEM Language_Str MSG_INFO_STATS_MENU = _UxGT("印表機統計"); // "Printer Stats" + PROGMEM Language_Str MSG_INFO_BOARD_MENU = _UxGT("主板訊息"); // "Board Info" + PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU = _UxGT("溫度計"); // "Thermistors" + PROGMEM Language_Str MSG_INFO_EXTRUDERS = _UxGT(" 擠出機"); // "Extruders" + PROGMEM Language_Str MSG_INFO_BAUDRATE = _UxGT("傳輸率"); // "Baud" + PROGMEM Language_Str MSG_INFO_PROTOCOL = _UxGT("協議"); // "Protocol" + PROGMEM Language_Str MSG_INFO_RUNAWAY_OFF = _UxGT("監測溫度失控:關"); // "Runaway Watch: OFF" + PROGMEM Language_Str MSG_INFO_RUNAWAY_ON = _UxGT("監測溫度失控:開"); // "Runaway Watch: ON" PROGMEM Language_Str MSG_CASE_LIGHT = _UxGT("外殼燈"); // "Case light" PROGMEM Language_Str MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("燈亮度"); // "Light BRIGHTNESS" PROGMEM Language_Str MSG_KILL_EXPECTED_PRINTER = _UxGT("打印機不正確"); // "The printer is incorrect" #if LCD_WIDTH >= 20 - PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("列印計數"); //"Print Count" - PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("已完成"); //"Completed" - PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("總列印時間"); //"Total print time" - PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("最長工作時間"); //"Longest job time" - PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("總計擠出"); //"Extruded total" + PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("列印計數"); // "Print Count" + PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("已完成"); // "Completed" + PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("總列印時間"); // "Total print time" + PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("最長工作時間"); // "Longest job time" + PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("總計擠出"); // "Extruded total" #else - PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("列印數"); //"Prints" - PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("完成"); //"Completed" - PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("總共"); //"Total" - PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("最長"); //"Longest" - PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("已擠出"); //"Extruded" + PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("列印數"); // "Prints" + PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("完成"); // "Completed" + PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("總共"); // "Total" + PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("最長"); // "Longest" + PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("已擠出"); // "Extruded" #endif - PROGMEM Language_Str MSG_INFO_MIN_TEMP = _UxGT("最低溫度"); //"Min Temp" - PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("最高溫度"); //"Max Temp" - PROGMEM Language_Str MSG_INFO_PSU = _UxGT("電源供應"); //"Power Supply" + PROGMEM Language_Str MSG_INFO_MIN_TEMP = _UxGT("最低溫度"); // "Min Temp" + PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("最高溫度"); // "Max Temp" + PROGMEM Language_Str MSG_INFO_PSU = _UxGT("電源供應"); // "Power Supply" PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("驅動力度"); // "Drive Strength" - PROGMEM Language_Str MSG_DAC_PERCENT = _UxGT("驅動 %"); // "Driver %" - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X 驅動 %"); //X Driver % - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y 驅動 %"); //Y Driver % - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z 驅動 %"); //Z Driver % + PROGMEM Language_Str MSG_DAC_PERCENT_A = LCD_STR_A _UxGT(" 驅動 %"); // X Driver % + PROGMEM Language_Str MSG_DAC_PERCENT_B = LCD_STR_B _UxGT(" 驅動 %"); // Y Driver % + PROGMEM Language_Str MSG_DAC_PERCENT_C = LCD_STR_C _UxGT(" 驅動 %"); // Z Driver % + PROGMEM Language_Str MSG_DAC_PERCENT_I = LCD_STR_I _UxGT(" 驅動 %"); // I Driver % + PROGMEM Language_Str MSG_DAC_PERCENT_J = LCD_STR_J _UxGT(" 驅動 %"); // J Driver % + PROGMEM Language_Str MSG_DAC_PERCENT_K = LCD_STR_K _UxGT(" 驅動 %"); // K Driver % PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E 驅動 %"); //E Driver % - PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("TMC連接錯誤"); //"TMC CONNECTION ERROR" + PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("TMC連接錯誤"); // "TMC CONNECTION ERROR" PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("保存驅動設置"); // "DAC EEPROM Write" - PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER = _UxGT("更換絲料"); //"FILAMENT CHANGE" + PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER = _UxGT("更換絲料"); // "FILAMENT CHANGE" PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("列印已暫停"); // "PRINT PAUSED" PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("裝載絲料"); // "LOAD FILAMENT" PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("卸載絲料"); // "UNLOAD FILAMENT" PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("恢複選項:"); // "RESUME OPTIONS:" PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("清除更多"); // "Purge more" - PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("恢復列印"); //"Resume print" + PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("恢復列印"); // "Resume print" PROGMEM Language_Str MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" 噴嘴: "); // " Nozzle: " - PROGMEM Language_Str MSG_RUNOUT_SENSOR = _UxGT("斷絲偵測"); //"Runout Sensor" - PROGMEM Language_Str MSG_RUNOUT_DISTANCE_MM = _UxGT("絲距離mm"); //"Runout Dist mm" + PROGMEM Language_Str MSG_RUNOUT_SENSOR = _UxGT("斷絲偵測"); // "Runout Sensor" + PROGMEM Language_Str MSG_RUNOUT_DISTANCE_MM = _UxGT("絲距離mm"); // "Runout Dist mm" PROGMEM Language_Str MSG_KILL_HOMING_FAILED = _UxGT("歸原位失敗"); // "Homing failed" PROGMEM Language_Str MSG_LCD_PROBING_FAILED = _UxGT("探針探測失敗"); // "Probing failed" @@ -471,28 +485,28 @@ namespace Language_zh_TW { // #if LCD_HEIGHT >= 4 PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_2_LINE("按下按鈕", "恢復列印")); //"Press Button to resume print" - PROGMEM Language_Str MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_1_LINE("停車中 ...")); //"Parking..." - PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("等待開始", "絲料", "變更")); //"Wait for start of the filament change" - PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("等待", "卸下絲料")); //"Wait for filament unload" - PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("插入絲料", "並按鍵", "繼續 ...")); //"Insert filament and press button to continue..." + PROGMEM Language_Str MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_1_LINE("停車中 ...")); // "Parking..." + PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("等待開始", "絲料", "變更")); // "Wait for start of the filament change" + PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("等待", "卸下絲料")); // "Wait for filament unload" + PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("插入絲料", "並按鍵", "繼續 ...")); // "Insert filament and press button to continue..." PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("按下按鈕", "加熱噴嘴.")); // "Press button to heat nozzle." PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("加熱噴嘴", "請等待 ...")); // "Heating nozzle Please wait..." - PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("等待", "進料")); //"Wait for filament load" + PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("等待", "進料")); // "Wait for filament load" PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_2_LINE("等待", "絲料清除")); // "Wait for filament purge" PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_2_LINE("按下完成","絲料清除")); //"Press button to filament purge" - PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("等待列印", "恢復")); //"Wait for print to resume" + PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("等待列印", "恢復")); // "Wait for print to resume" #else // LCD_HEIGHT < 4 - PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_1_LINE("按下繼續..")); //"Click to continue" - PROGMEM Language_Str MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_1_LINE("停車中 ...")); //"Parking..." - PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("請等待 ...")); //"Please wait..." - PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("插入並點擊")); //"Insert and Click" - PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_1_LINE("按下加熱..")); //"Click to heat" - PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("加熱中 ...")); //"Heating..." - PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("退出中 ...")); //"Ejecting..." - PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("載入中 ...")); //"Loading..." - PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("清除中 ...")); //"Purging..." - PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_1_LINE("按下完成..")); //"Click to finish" - PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("恢復中 ...")); //"Resuming..." + PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_1_LINE("按下繼續..")); // "Click to continue" + PROGMEM Language_Str MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_1_LINE("停車中 ...")); // "Parking..." + PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("請等待 ...")); // "Please wait..." + PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("插入並點擊")); // "Insert and Click" + PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_1_LINE("按下加熱..")); // "Click to heat" + PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("加熱中 ...")); // "Heating..." + PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("退出中 ...")); // "Ejecting..." + PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("載入中 ...")); // "Loading..." + PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("清除中 ...")); // "Purging..." + PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_1_LINE("按下完成..")); // "Click to finish" + PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("恢復中 ...")); // "Resuming..." #endif // LCD_HEIGHT < 4 } diff --git a/Marlin/src/lcd/menu/menu_advanced.cpp b/Marlin/src/lcd/menu/menu_advanced.cpp index 4ae38edf24ce..467aa9a4eb50 100644 --- a/Marlin/src/lcd/menu/menu_advanced.cpp +++ b/Marlin/src/lcd/menu/menu_advanced.cpp @@ -68,7 +68,7 @@ void menu_backlash(); START_MENU(); BACK_ITEM(MSG_ADVANCED_SETTINGS); #define EDIT_DAC_PERCENT(A) EDIT_ITEM(uint8, MSG_DAC_PERCENT_##A, &driverPercent[_AXIS(A)], 0, 100, []{ stepper_dac.set_current_percents(driverPercent); }) - LOGICAL_AXIS_CODE(EDIT_DAC_PERCENT(E), EDIT_DAC_PERCENT(X), EDIT_DAC_PERCENT(Y), EDIT_DAC_PERCENT(Z), EDIT_DAC_PERCENT(I), EDIT_DAC_PERCENT(J), EDIT_DAC_PERCENT(K)); + LOGICAL_AXIS_CODE(EDIT_DAC_PERCENT(E), EDIT_DAC_PERCENT(A), EDIT_DAC_PERCENT(B), EDIT_DAC_PERCENT(C), EDIT_DAC_PERCENT(I), EDIT_DAC_PERCENT(J), EDIT_DAC_PERCENT(K)); ACTION_ITEM(MSG_DAC_EEPROM_WRITE, stepper_dac.commit_eeprom); END_MENU(); }