happex.dat

# (optional) Setup parameters for hamc for PREX

# Setup choices for HRS
hrs_setup coldseptum uselerose

spreader_collim radlen 0.042

# HRS momentum and angle
HRS_P0 3.11
HRS_angle 6

# The HRS_acceptoff is normally commented out (or deleted)
# When uncommented it's a way of testing the acceptance model.
# Turn on one thing at a time to check the cuts at each point.
# 0 means ignore the acceptance limit, 1 means use it.
#  1         2       3        4             5     6     7        8        9   10
# target, septin, septout, collim(collim2), q1, dipin, dipexit, q3in, q3exit, focal
HRS_acceptoff 0 1 1 0 1 1 1 1 1 1 

# Beam parameters.  Raster is in meters, typ 0.0004 (means +/- this)
beam  E0 3.176 E0sigma 0.0002   rastered  xraster 0.0004  yraster 0.0004

# range of angles (scatt, azimuth) in degrees
# phi=0 is up.  phi=90 is into HRS,  phi=180 is down.
out_angles thetamin 0.2 thetamax 12  phimin 0 phimax 180

# uncomment the following line if you want to iterate
# iterate

# Here is the variable to iterate
kick:track P0 0.003