diff --git a/devstack/clean.sls b/devstack/clean.sls index 793a516..c55067d 100644 --- a/devstack/clean.sls +++ b/devstack/clean.sls @@ -15,7 +15,7 @@ openstack-devstack unstack: - HOST_IP: {{ grains.ipv4[-1] if not devstack.local.host_ip else devstack.local.host_ip }} - HOST_IPV6: {{ grains.ipv6[-1] if not devstack.local.host_ipv6 else devstack.local.host_ipv6 }} - runas: {{ devstack.local.username }} - - onlyif: test -f {{ devstack.local.sudoers_file }} && getent passwd {{ devstack.local.username }} + - onlyif: test -f {{devstack.local.sudoers_file}} && getent passwd {{devstack.local.username}} - require_in: - file: openstack-devstack cleandown - user: openstack-devstack ensure user and group absent @@ -27,7 +27,7 @@ openstack-devstack clean: - HOST_IP: {{ grains.ipv4[-1] if not devstack.local.host_ip else devstack.local.host_ip }} - HOST_IPV6: {{ grains.ipv6[-1] if not devstack.local.host_ipv6 else devstack.local.host_ipv6 }} - runas: {{ devstack.local.username }} - - onlyif: test -f {{ devstack.local.sudoers_file }} && getent passwd {{ devstack.local.username }} + - onlyif: test -f {{devstack.local.sudoers_file}} && getent passwd {{devstack.local.username}} - require_in: - file: openstack-devstack cleandown - user: openstack-devstack ensure user and group absent diff --git a/devstack/files/local.conf.j2 b/devstack/files/local.conf.j2 index 2fe3662..442a16d 100644 --- a/devstack/files/local.conf.j2 +++ b/devstack/files/local.conf.j2 @@ -5,7 +5,7 @@ [[local|localrc]] ENABLED_SERVICES={{ data.enabled_services or "" }} DEST=${DEST:-{{ "/opt/stack" if not dir.dest else dir.dest }}} -DATA_DIR=${DATA_DIR:-"${DEST}/data"} +DATA_DIR=${DATA_DIR:-{{ '/opt/stack' if not dir.dest else dir.dest }}/data} GIT_BASE=${GIT_BASE:-{{ "https://git.openstack.org" if not data.git_base else data.git_base }}} GIT_BRANCH=${GIT_BRANCH:-{{ "master" if not data.git_branch else data.git_branch }}} diff --git a/devstack/files/stackrc.j2 b/devstack/files/stackrc.j2 new file mode 100644 index 0000000..f858788 --- /dev/null +++ b/devstack/files/stackrc.j2 @@ -0,0 +1,958 @@ +#!/bin/bash +# +# stackrc +# +#################### +## Managed by Salt +#################### + +# ensure we don't re-source this in the same environment +[[ -z "$_DEVSTACK_STACKRC" ]] || return 0 +declare -r -g _DEVSTACK_STACKRC=1 + +# Find the other rc files +RC_DIR=$(cd $(dirname "${BASH_SOURCE:-$0}") && pwd) + +# Source required DevStack functions and globals +source $RC_DIR/functions + +# Set the target branch. This is used so that stable branching +# does not need to update each repo below. +TARGET_BRANCH=master + +# Cycle trailing projects need to branch later than the others. +TRAILING_TARGET_BRANCH=master + +# And some repos do not create stable branches, so this is used +# to make it explicit and avoid accidentally setting to a stable +# branch. +BRANCHLESS_TARGET_BRANCH=master + +# Destination path for installation +DEST=${DEST:-{{ "/opt/stack" if not dir.dest else dir.dest }}} + +# Destination for working data +DATA_DIR=${DEST}/data + +# Destination for status files +SERVICE_DIR=${DEST}/status + +# Path for subunit output file +SUBUNIT_OUTPUT=${DEST}/devstack.subunit + +# Determine stack user +if [[ $EUID -eq 0 ]]; then + STACK_USER=stack +else + STACK_USER=$(whoami) +fi + +# Specify region name Region +REGION_NAME=${REGION_NAME:-RegionOne} + +# Specify name of region where identity service endpoint is registered. +# When deploying multiple DevStack instances in different regions with shared +# Keystone, set KEYSTONE_REGION_NAME to the region where Keystone is running +# for DevStack instances which do not host Keystone. +KEYSTONE_REGION_NAME=${KEYSTONE_REGION_NAME:-$REGION_NAME} + +# Specify which services to launch. These generally correspond to +# screen tabs. To change the default list, use the ``enable_service`` and +# ``disable_service`` functions in ``local.conf``. +# For example, to enable Swift as part of DevStack add the following +# settings in ``local.conf``: +# [[local|localrc]] +# enable_service s-proxy s-object s-container s-account +# This allows us to pass ``ENABLED_SERVICES`` +if ! isset ENABLED_SERVICES ; then + # Keystone - nothing works without keystone + ENABLED_SERVICES=key + # Nova - services to support libvirt based openstack clouds + ENABLED_SERVICES+=,n-api,n-cpu,n-cond,n-sch,n-novnc,n-cauth,n-api-meta + # Placement service needed for Nova + ENABLED_SERVICES+=,placement-api,placement-client + # Glance services needed for Nova + ENABLED_SERVICES+=,g-api,g-reg + # Cinder + ENABLED_SERVICES+=,c-sch,c-api,c-vol + # Neutron + ENABLED_SERVICES+=,q-svc,q-dhcp,q-meta,q-agt,q-l3 + # Dashboard + ENABLED_SERVICES+=,horizon + # Additional services + ENABLED_SERVICES+=,rabbit,tempest,mysql,etcd3,dstat +fi + +# Global toggle for enabling services under mod_wsgi. If this is set to +# ``True`` all services that use HTTPD + mod_wsgi as the preferred method of +# deployment, will be deployed under Apache. If this is set to ``False`` all +# services will rely on the local toggle variable (e.g. ``KEYSTONE_USE_MOD_WSGI``) +ENABLE_HTTPD_MOD_WSGI_SERVICES=True + +# Set the default Nova APIs to enable +NOVA_ENABLED_APIS=osapi_compute,metadata + +# CELLSV2_SETUP - how we should configure services with cells v2 +# +# - superconductor - this is one conductor for the api services, and +# one per cell managing the compute services. This is preferred +# - singleconductor - this is one conductor for the whole deployment, +# this is not recommended, and will be removed in the future. +CELLSV2_SETUP=${CELLSV2_SETUP:-"superconductor"} + +# Set the root URL for Horizon +HORIZON_APACHE_ROOT="/dashboard" + +# Whether to use SYSTEMD to manage services, we only do this from +# Queens forward. +USE_SYSTEMD="True" +USER_UNITS=$(trueorfalse False USER_UNITS) +if [[ "$USER_UNITS" == "True" ]]; then + SYSTEMD_DIR="$HOME/.local/share/systemd/user" + SYSTEMCTL="systemctl --user" +else + SYSTEMD_DIR="/etc/systemd/system" + SYSTEMCTL="sudo systemctl" +fi + + +# Whether or not to enable Kernel Samepage Merging (KSM) if available. +# This allows programs that mark their memory as mergeable to share +# memory pages if they are identical. This is particularly useful with +# libvirt backends. This reduces memory usage at the cost of CPU overhead +# to scan memory. We default to enabling it because we tend to be more +# memory constrained than CPU bound. +ENABLE_KSM=$(trueorfalse True ENABLE_KSM) + +# Passwords generated by interactive devstack runs +if [[ -r $RC_DIR/.localrc.password ]]; then + source $RC_DIR/.localrc.password +fi + +# Control whether Python 3 should be used at all. +export USE_PYTHON3=$(trueorfalse False USE_PYTHON3) + +# Control whether Python 3 is enabled for specific services by the +# base name of the directory from which they are installed. See +# enable_python3_package to edit this variable and use_python3_for to +# test membership. +export ENABLED_PYTHON3_PACKAGES="nova,glance,cinder,uwsgi,python-openstackclient,openstacksdk" + +# Explicitly list services not to run under Python 3. See +# disable_python3_package to edit this variable. +export DISABLED_PYTHON3_PACKAGES="" + +# When Python 3 is supported by an application, adding the specific +# version of Python 3 to this variable will install the app using that +# version of the interpreter instead of 2.7. +_DEFAULT_PYTHON3_VERSION="$(_get_python_version python3)" +export PYTHON3_VERSION=${PYTHON3_VERSION:-${_DEFAULT_PYTHON3_VERSION:-3.5}} + +# Just to be more explicit on the Python 2 version to use. +_DEFAULT_PYTHON2_VERSION="$(_get_python_version python2)" +export PYTHON2_VERSION=${PYTHON2_VERSION:-${_DEFAULT_PYTHON2_VERSION:-2.7}} + +# allow local overrides of env variables, including repo config +if [[ -f $RC_DIR/localrc ]]; then + # Old-style user-supplied config + source $RC_DIR/localrc +elif [[ -f $RC_DIR/.localrc.auto ]]; then + # New-style user-supplied config extracted from local.conf + source $RC_DIR/.localrc.auto +fi + +# Default for log coloring is based on interactive-or-not. +# Baseline assumption is that non-interactive invocations are for CI, +# where logs are to be presented as browsable text files; hence color +# codes should be omitted. +# Simply override LOG_COLOR if your environment is different. +if [ -t 1 ]; then + _LOG_COLOR_DEFAULT=True +else + _LOG_COLOR_DEFAULT=False +fi + +# Use color for logging output (only available if syslog is not used) +LOG_COLOR=$(trueorfalse $_LOG_COLOR_DEFAULT LOG_COLOR) + +# Make tracing more educational +if [[ "$LOG_COLOR" == "True" ]]; then + # tput requires TERM or -T. If neither is present, use vt100, a + # no-frills least common denominator supported everywhere. + TPUT_T= + if ! [ $TERM ]; then + TPUT_T='-T vt100' + fi + export PS4='+\[$(tput '$TPUT_T' setaf 242)\]$(short_source)\[$(tput '$TPUT_T' sgr0)\] ' +else + export PS4='+ $(short_source): ' +fi + +# Configure Identity API version: 2.0, 3 +IDENTITY_API_VERSION=${IDENTITY_API_VERSION:-3} + +# Set the option ENABLE_IDENTITY_V2 to True. It defines whether the DevStack +# deployment will be deploying the Identity v2 pipelines. If this option is set +# to ``False``, DevStack will: i) disable Identity v2; ii) configure Tempest to +# skip Identity v2 specific tests; and iii) configure Horizon to use Identity +# v3. When this option is set to ``False``, the option IDENTITY_API_VERSION +# will to be set to ``3`` in order to make DevStack register the Identity +# endpoint as v3. This flag is experimental and will be used as basis to +# identify the projects which still have issues to operate with Identity v3. +ENABLE_IDENTITY_V2=$(trueorfalse False ENABLE_IDENTITY_V2) +if [ "$ENABLE_IDENTITY_V2" == "False" ]; then + IDENTITY_API_VERSION=3 +fi + +# Enable use of Python virtual environments. Individual project use of +# venvs are controlled by the PROJECT_VENV array; every project with +# an entry in the array will be installed into the named venv. +# By default this will put each project into its own venv. +USE_VENV=$(trueorfalse False USE_VENV) + +# Add packages that need to be installed into a venv but are not in any +# requirmenets files here, in a comma-separated list +ADDITIONAL_VENV_PACKAGES=${ADITIONAL_VENV_PACKAGES:-""} + +# This can be used to turn database query logging on and off +# (currently only implemented for MySQL backend) +DATABASE_QUERY_LOGGING=$(trueorfalse False DATABASE_QUERY_LOGGING) + +# Set a timeout for git operations. If git is still running when the +# timeout expires, the command will be retried up to 3 times. This is +# in the format for timeout(1); +# +# DURATION is a floating point number with an optional suffix: 's' +# for seconds (the default), 'm' for minutes, 'h' for hours or 'd' +# for days. +# +# Zero disables timeouts +GIT_TIMEOUT=${GIT_TIMEOUT:-0} + +# How should we be handling WSGI deployments. By default we're going +# to allow for 2 modes, which is "uwsgi" which runs with an apache +# proxy uwsgi in front of it, or "mod_wsgi", which runs in +# apache. mod_wsgi is deprecated, don't use it. +WSGI_MODE=${WSGI_MODE:-"uwsgi"} + +# Repositories +# ------------ + +# Base GIT Repo URL +# Another option is https://git.openstack.org +GIT_BASE=${GIT_BASE:-git://git.openstack.org} + +# The location of REQUIREMENTS once cloned +REQUIREMENTS_DIR=$DEST/requirements + +# Which libraries should we install from git instead of using released +# versions on pypi? +# +# By default DevStack is now installing libraries from pypi instead of +# from git repositories by default. This works great if you are +# developing server components, but if you want to develop libraries +# and see them live in DevStack you need to tell DevStack it should +# install them from git. +# +# ex: LIBS_FROM_GIT=python-keystoneclient,oslo.config +# +# Will install those 2 libraries from git, the rest from pypi. +# +# Setting the variable to 'ALL' will activate the download for all +# libraries. + +DEVSTACK_SERIES="stein" + +############## +# +# OpenStack Server Components +# +############## + +# block storage service +CINDER_REPO=${CINDER_REPO:-${GIT_BASE}/openstack/cinder.git} +CINDER_BRANCH=${CINDER_BRANCH:-$TARGET_BRANCH} + +# image catalog service +GLANCE_REPO=${GLANCE_REPO:-${GIT_BASE}/openstack/glance.git} +GLANCE_BRANCH=${GLANCE_BRANCH:-$TARGET_BRANCH} + +# django powered web control panel for openstack +HORIZON_REPO=${HORIZON_REPO:-${GIT_BASE}/openstack/horizon.git} +HORIZON_BRANCH=${HORIZON_BRANCH:-$TARGET_BRANCH} + +# unified auth system (manages accounts/tokens) +KEYSTONE_REPO=${KEYSTONE_REPO:-${GIT_BASE}/openstack/keystone.git} +KEYSTONE_BRANCH=${KEYSTONE_BRANCH:-$TARGET_BRANCH} + +# neutron service +NEUTRON_REPO=${NEUTRON_REPO:-${GIT_BASE}/openstack/neutron.git} +NEUTRON_BRANCH=${NEUTRON_BRANCH:-$TARGET_BRANCH} + +# neutron fwaas service +NEUTRON_FWAAS_REPO=${NEUTRON_FWAAS_REPO:-${GIT_BASE}/openstack/neutron-fwaas.git} +NEUTRON_FWAAS_BRANCH=${NEUTRON_FWAAS_BRANCH:-$TARGET_BRANCH} + +# compute service +NOVA_REPO=${NOVA_REPO:-${GIT_BASE}/openstack/nova.git} +NOVA_BRANCH=${NOVA_BRANCH:-$TARGET_BRANCH} + +# object storage service +SWIFT_REPO=${SWIFT_REPO:-${GIT_BASE}/openstack/swift.git} +SWIFT_BRANCH=${SWIFT_BRANCH:-$TARGET_BRANCH} + +# placement service +PLACEMENT_REPO=${PLACEMENT_REPO:-${GIT_BASE}/openstack/placement.git} +PLACEMENT_BRANCH=${PLACEMENT_BRANCH:-$TARGET_BRANCH} + +############## +# +# Testing Components +# +############## + +# consolidated openstack requirements +REQUIREMENTS_REPO=${REQUIREMENTS_REPO:-${GIT_BASE}/openstack/requirements.git} +REQUIREMENTS_BRANCH=${REQUIREMENTS_BRANCH:-$TARGET_BRANCH} + +# Tempest test suite +TEMPEST_REPO=${TEMPEST_REPO:-${GIT_BASE}/openstack/tempest.git} +TEMPEST_BRANCH=${TEMPEST_BRANCH:-$BRANCHLESS_TARGET_BRANCH} + + +############## +# +# OpenStack Client Library Components +# Note default install is from pip, see LIBS_FROM_GIT +# +############## + +# volume client +GITREPO["python-cinderclient"]=${CINDERCLIENT_REPO:-${GIT_BASE}/openstack/python-cinderclient.git} +GITBRANCH["python-cinderclient"]=${CINDERCLIENT_BRANCH:-$TARGET_BRANCH} + +# os-brick client for local volume attachement +GITREPO["python-brick-cinderclient-ext"]=${BRICK_CINDERCLIENT_REPO:-${GIT_BASE}/openstack/python-brick-cinderclient-ext.git} +GITBRANCH["python-brick-cinderclient-ext"]=${BRICK_CINDERCLIENT_BRANCH:-$TARGET_BRANCH} + +# python barbican client library +GITREPO["python-barbicanclient"]=${BARBICANCLIENT_REPO:-${GIT_BASE}/openstack/python-barbicanclient.git} +GITBRANCH["python-barbicanclient"]=${BARBICANCLIENT_BRANCH:-$TARGET_BRANCH} +GITDIR["python-barbicanclient"]=$DEST/python-barbicanclient + +# python glance client library +GITREPO["python-glanceclient"]=${GLANCECLIENT_REPO:-${GIT_BASE}/openstack/python-glanceclient.git} +GITBRANCH["python-glanceclient"]=${GLANCECLIENT_BRANCH:-$TARGET_BRANCH} + +# ironic client +GITREPO["python-ironicclient"]=${IRONICCLIENT_REPO:-${GIT_BASE}/openstack/python-ironicclient.git} +GITBRANCH["python-ironicclient"]=${IRONICCLIENT_BRANCH:-$TARGET_BRANCH} +# ironic plugin is out of tree, but nova uses it. set GITDIR here. +GITDIR["python-ironicclient"]=$DEST/python-ironicclient + +# the base authentication plugins that clients use to authenticate +GITREPO["keystoneauth"]=${KEYSTONEAUTH_REPO:-${GIT_BASE}/openstack/keystoneauth.git} +GITBRANCH["keystoneauth"]=${KEYSTONEAUTH_BRANCH:-$TARGET_BRANCH} + +# python keystone client library to nova that horizon uses +GITREPO["python-keystoneclient"]=${KEYSTONECLIENT_REPO:-${GIT_BASE}/openstack/python-keystoneclient.git} +GITBRANCH["python-keystoneclient"]=${KEYSTONECLIENT_BRANCH:-$TARGET_BRANCH} + +# neutron client +GITREPO["python-neutronclient"]=${NEUTRONCLIENT_REPO:-${GIT_BASE}/openstack/python-neutronclient.git} +GITBRANCH["python-neutronclient"]=${NEUTRONCLIENT_BRANCH:-$TARGET_BRANCH} + +# python client library to nova that horizon (and others) use +GITREPO["python-novaclient"]=${NOVACLIENT_REPO:-${GIT_BASE}/openstack/python-novaclient.git} +GITBRANCH["python-novaclient"]=${NOVACLIENT_BRANCH:-$TARGET_BRANCH} + +# python swift client library +GITREPO["python-swiftclient"]=${SWIFTCLIENT_REPO:-${GIT_BASE}/openstack/python-swiftclient.git} +GITBRANCH["python-swiftclient"]=${SWIFTCLIENT_BRANCH:-$TARGET_BRANCH} + +# consolidated openstack python client +GITREPO["python-openstackclient"]=${OPENSTACKCLIENT_REPO:-${GIT_BASE}/openstack/python-openstackclient.git} +GITBRANCH["python-openstackclient"]=${OPENSTACKCLIENT_BRANCH:-$TARGET_BRANCH} +# this doesn't exist in a lib file, so set it here +GITDIR["python-openstackclient"]=$DEST/python-openstackclient + +# placement-api CLI +GITREPO["osc-placement"]=${OSC_PLACEMENT_REPO:-${GIT_BASE}/openstack/osc-placement.git} +GITBRANCH["osc-placement"]=${OSC_PLACEMENT_BRANCH:-$TARGET_BRANCH} + + +################### +# +# Oslo Libraries +# Note default install is from pip, see LIBS_FROM_GIT +# +################### + +# castellan key manager interface +GITREPO["castellan"]=${CASTELLAN_REPO:-${GIT_BASE}/openstack/castellan.git} +GITBRANCH["castellan"]=${CASTELLAN_BRANCH:-$TARGET_BRANCH} + +# cliff command line framework +GITREPO["cliff"]=${CLIFF_REPO:-${GIT_BASE}/openstack/cliff.git} +GITBRANCH["cliff"]=${CLIFF_BRANCH:-$TARGET_BRANCH} + +# async framework/helpers +GITREPO["futurist"]=${FUTURIST_REPO:-${GIT_BASE}/openstack/futurist.git} +GITBRANCH["futurist"]=${FUTURIST_BRANCH:-$TARGET_BRANCH} + +# debtcollector deprecation framework/helpers +GITREPO["debtcollector"]=${DEBTCOLLECTOR_REPO:-${GIT_BASE}/openstack/debtcollector.git} +GITBRANCH["debtcollector"]=${DEBTCOLLECTOR_BRANCH:-$TARGET_BRANCH} + +# helpful state machines +GITREPO["automaton"]=${AUTOMATON_REPO:-${GIT_BASE}/openstack/automaton.git} +GITBRANCH["automaton"]=${AUTOMATON_BRANCH:-$TARGET_BRANCH} + +# oslo.cache +GITREPO["oslo.cache"]=${OSLOCACHE_REPO:-${GIT_BASE}/openstack/oslo.cache.git} +GITBRANCH["oslo.cache"]=${OSLOCACHE_BRANCH:-$TARGET_BRANCH} + +# oslo.concurrency +GITREPO["oslo.concurrency"]=${OSLOCON_REPO:-${GIT_BASE}/openstack/oslo.concurrency.git} +GITBRANCH["oslo.concurrency"]=${OSLOCON_BRANCH:-$TARGET_BRANCH} + +# oslo.config +GITREPO["oslo.config"]=${OSLOCFG_REPO:-${GIT_BASE}/openstack/oslo.config.git} +GITBRANCH["oslo.config"]=${OSLOCFG_BRANCH:-$TARGET_BRANCH} + +# oslo.context +GITREPO["oslo.context"]=${OSLOCTX_REPO:-${GIT_BASE}/openstack/oslo.context.git} +GITBRANCH["oslo.context"]=${OSLOCTX_BRANCH:-$TARGET_BRANCH} + +# oslo.db +GITREPO["oslo.db"]=${OSLODB_REPO:-${GIT_BASE}/openstack/oslo.db.git} +GITBRANCH["oslo.db"]=${OSLODB_BRANCH:-$TARGET_BRANCH} + +# oslo.i18n +GITREPO["oslo.i18n"]=${OSLOI18N_REPO:-${GIT_BASE}/openstack/oslo.i18n.git} +GITBRANCH["oslo.i18n"]=${OSLOI18N_BRANCH:-$TARGET_BRANCH} + +# oslo.log +GITREPO["oslo.log"]=${OSLOLOG_REPO:-${GIT_BASE}/openstack/oslo.log.git} +GITBRANCH["oslo.log"]=${OSLOLOG_BRANCH:-$TARGET_BRANCH} + +# oslo.messaging +GITREPO["oslo.messaging"]=${OSLOMSG_REPO:-${GIT_BASE}/openstack/oslo.messaging.git} +GITBRANCH["oslo.messaging"]=${OSLOMSG_BRANCH:-$TARGET_BRANCH} + +# oslo.middleware +GITREPO["oslo.middleware"]=${OSLOMID_REPO:-${GIT_BASE}/openstack/oslo.middleware.git} +GITBRANCH["oslo.middleware"]=${OSLOMID_BRANCH:-$TARGET_BRANCH} + +# oslo.policy +GITREPO["oslo.policy"]=${OSLOPOLICY_REPO:-${GIT_BASE}/openstack/oslo.policy.git} +GITBRANCH["oslo.policy"]=${OSLOPOLICY_BRANCH:-$TARGET_BRANCH} + +# oslo.privsep +GITREPO["oslo.privsep"]=${OSLOPRIVSEP_REPO:-${GIT_BASE}/openstack/oslo.privsep.git} +GITBRANCH["oslo.privsep"]=${OSLOPRIVSEP_BRANCH:-$TARGET_BRANCH} + +# oslo.reports +GITREPO["oslo.reports"]=${OSLOREPORTS_REPO:-${GIT_BASE}/openstack/oslo.reports.git} +GITBRANCH["oslo.reports"]=${OSLOREPORTS_BRANCH:-$TARGET_BRANCH} + +# oslo.rootwrap +GITREPO["oslo.rootwrap"]=${OSLORWRAP_REPO:-${GIT_BASE}/openstack/oslo.rootwrap.git} +GITBRANCH["oslo.rootwrap"]=${OSLORWRAP_BRANCH:-$TARGET_BRANCH} + +# oslo.serialization +GITREPO["oslo.serialization"]=${OSLOSERIALIZATION_REPO:-${GIT_BASE}/openstack/oslo.serialization.git} +GITBRANCH["oslo.serialization"]=${OSLOSERIALIZATION_BRANCH:-$TARGET_BRANCH} + +# oslo.service +GITREPO["oslo.service"]=${OSLOSERVICE_REPO:-${GIT_BASE}/openstack/oslo.service.git} +GITBRANCH["oslo.service"]=${OSLOSERVICE_BRANCH:-$TARGET_BRANCH} + +# oslo.utils +GITREPO["oslo.utils"]=${OSLOUTILS_REPO:-${GIT_BASE}/openstack/oslo.utils.git} +GITBRANCH["oslo.utils"]=${OSLOUTILS_BRANCH:-$TARGET_BRANCH} + +# oslo.versionedobjects +GITREPO["oslo.versionedobjects"]=${OSLOVERSIONEDOBJECTS_REPO:-${GIT_BASE}/openstack/oslo.versionedobjects.git} +GITBRANCH["oslo.versionedobjects"]=${OSLOVERSIONEDOBJECTS_BRANCH:-$TARGET_BRANCH} + +# oslo.vmware +GITREPO["oslo.vmware"]=${OSLOVMWARE_REPO:-${GIT_BASE}/openstack/oslo.vmware.git} +GITBRANCH["oslo.vmware"]=${OSLOVMWARE_BRANCH:-$TARGET_BRANCH} + +# osprofiler +GITREPO["osprofiler"]=${OSPROFILER_REPO:-${GIT_BASE}/openstack/osprofiler.git} +GITBRANCH["osprofiler"]=${OSPROFILER_BRANCH:-$TARGET_BRANCH} + +# pycadf auditing library +GITREPO["pycadf"]=${PYCADF_REPO:-${GIT_BASE}/openstack/pycadf.git} +GITBRANCH["pycadf"]=${PYCADF_BRANCH:-$TARGET_BRANCH} + +# stevedore plugin manager +GITREPO["stevedore"]=${STEVEDORE_REPO:-${GIT_BASE}/openstack/stevedore.git} +GITBRANCH["stevedore"]=${STEVEDORE_BRANCH:-$TARGET_BRANCH} + +# taskflow plugin manager +GITREPO["taskflow"]=${TASKFLOW_REPO:-${GIT_BASE}/openstack/taskflow.git} +GITBRANCH["taskflow"]=${TASKFLOW_BRANCH:-$TARGET_BRANCH} + +# tooz plugin manager +GITREPO["tooz"]=${TOOZ_REPO:-${GIT_BASE}/openstack/tooz.git} +GITBRANCH["tooz"]=${TOOZ_BRANCH:-$TARGET_BRANCH} + +# pbr drives the setuptools configs +GITREPO["pbr"]=${PBR_REPO:-${GIT_BASE}/openstack-dev/pbr.git} +GITBRANCH["pbr"]=${PBR_BRANCH:-$TARGET_BRANCH} + + +################## +# +# Libraries managed by OpenStack programs (non oslo) +# +################## + +# cursive library +GITREPO["cursive"]=${CURSIVE_REPO:-${GIT_BASE}/openstack/cursive.git} +GITBRANCH["cursive"]=${CURSIVE_BRANCH:-$TARGET_BRANCH} + +# glance store library +GITREPO["glance_store"]=${GLANCE_STORE_REPO:-${GIT_BASE}/openstack/glance_store.git} +GITBRANCH["glance_store"]=${GLANCE_STORE_BRANCH:-$TARGET_BRANCH} + +# keystone middleware +GITREPO["keystonemiddleware"]=${KEYSTONEMIDDLEWARE_REPO:-${GIT_BASE}/openstack/keystonemiddleware.git} +GITBRANCH["keystonemiddleware"]=${KEYSTONEMIDDLEWARE_BRANCH:-$TARGET_BRANCH} + +# s3 support for swift +SWIFT3_REPO=${SWIFT3_REPO:-${GIT_BASE}/openstack/swift3.git} +SWIFT3_BRANCH=${SWIFT3_BRANCH:-$TARGET_BRANCH} + +# ceilometer middleware +GITREPO["ceilometermiddleware"]=${CEILOMETERMIDDLEWARE_REPO:-${GIT_BASE}/openstack/ceilometermiddleware.git} +GITBRANCH["ceilometermiddleware"]=${CEILOMETERMIDDLEWARE_BRANCH:-$TARGET_BRANCH} +GITDIR["ceilometermiddleware"]=$DEST/ceilometermiddleware + +# openstacksdk OpenStack Python SDK +GITREPO["openstacksdk"]=${OPENSTACKSDK_REPO:-${GIT_BASE}/openstack/openstacksdk.git} +GITBRANCH["openstacksdk"]=${OPENSTACKSDK_BRANCH:-$TARGET_BRANCH} + +# os-brick library to manage local volume attaches +GITREPO["os-brick"]=${OS_BRICK_REPO:-${GIT_BASE}/openstack/os-brick.git} +GITBRANCH["os-brick"]=${OS_BRICK_BRANCH:-$TARGET_BRANCH} + +# os-client-config to manage clouds.yaml and friends +GITREPO["os-client-config"]=${OS_CLIENT_CONFIG_REPO:-${GIT_BASE}/openstack/os-client-config.git} +GITBRANCH["os-client-config"]=${OS_CLIENT_CONFIG_BRANCH:-$TARGET_BRANCH} +GITDIR["os-client-config"]=$DEST/os-client-config + +# os-vif library to communicate between Neutron to Nova +GITREPO["os-vif"]=${OS_VIF_REPO:-${GIT_BASE}/openstack/os-vif.git} +GITBRANCH["os-vif"]=${OS_VIF_BRANCH:-$TARGET_BRANCH} + +# osc-lib OpenStackClient common lib +GITREPO["osc-lib"]=${OSC_LIB_REPO:-${GIT_BASE}/openstack/osc-lib.git} +GITBRANCH["osc-lib"]=${OSC_LIB_BRANCH:-$TARGET_BRANCH} + +# ironic common lib +GITREPO["ironic-lib"]=${IRONIC_LIB_REPO:-${GIT_BASE}/openstack/ironic-lib.git} +GITBRANCH["ironic-lib"]=${IRONIC_LIB_BRANCH:-$TARGET_BRANCH} +# this doesn't exist in a lib file, so set it here +GITDIR["ironic-lib"]=$DEST/ironic-lib + +# diskimage-builder tool +GITREPO["diskimage-builder"]=${DIB_REPO:-${GIT_BASE}/openstack/diskimage-builder.git} +GITBRANCH["diskimage-builder"]=${DIB_BRANCH:-$TARGET_BRANCH} +GITDIR["diskimage-builder"]=$DEST/diskimage-builder + +# neutron-lib library containing neutron stable non-REST interfaces +GITREPO["neutron-lib"]=${NEUTRON_LIB_REPO:-${GIT_BASE}/openstack/neutron-lib.git} +GITBRANCH["neutron-lib"]=${NEUTRON_LIB_BRANCH:-$TARGET_BRANCH} +GITDIR["neutron-lib"]=$DEST/neutron-lib + +# os-traits library for resource provider traits in the placement service +GITREPO["os-traits"]=${OS_TRAITS_REPO:-${GIT_BASE}/openstack/os-traits.git} +GITBRANCH["os-traits"]=${OS_TRAITS_BRANCH:-$TARGET_BRANCH} + +################## +# +# TripleO / Heat Agent Components +# +################## + +# run-parts script required by os-refresh-config +DIB_UTILS_REPO=${DIB_UTILS_REPO:-${GIT_BASE}/openstack/dib-utils.git} +DIB_UTILS_BRANCH=${DIB_UTILS_BRANCH:-$BRANCHLESS_TARGET_BRANCH} + +# os-apply-config configuration template tool +OAC_REPO=${OAC_REPO:-${GIT_BASE}/openstack/os-apply-config.git} +OAC_BRANCH=${OAC_BRANCH:-$TRAILING_TARGET_BRANCH} + +# os-collect-config configuration agent +OCC_REPO=${OCC_REPO:-${GIT_BASE}/openstack/os-collect-config.git} +OCC_BRANCH=${OCC_BRANCH:-$TRAILING_TARGET_BRANCH} + +# os-refresh-config configuration run-parts tool +ORC_REPO=${ORC_REPO:-${GIT_BASE}/openstack/os-refresh-config.git} +ORC_BRANCH=${ORC_BRANCH:-$TRAILING_TARGET_BRANCH} + + +################# +# +# 3rd Party Components (non pip installable) +# +# NOTE(sdague): these should be converted to release version installs or removed +# +################# + +# ironic python agent +IRONIC_PYTHON_AGENT_REPO=${IRONIC_PYTHON_AGENT_REPO:-${GIT_BASE}/openstack/ironic-python-agent.git} +IRONIC_PYTHON_AGENT_BRANCH=${IRONIC_PYTHON_AGENT_BRANCH:-$TARGET_BRANCH} + +# a websockets/html5 or flash powered VNC console for vm instances +NOVNC_REPO=${NOVNC_REPO:-https://github.com/novnc/noVNC.git} +NOVNC_BRANCH=${NOVNC_BRANCH:-stable/v0.6} + +# a websockets/html5 or flash powered SPICE console for vm instances +SPICE_REPO=${SPICE_REPO:-http://anongit.freedesktop.org/git/spice/spice-html5.git} +SPICE_BRANCH=${SPICE_BRANCH:-$BRANCHLESS_TARGET_BRANCH} + +# Global flag used to configure Tempest and potentially other services if +# volume multiattach is supported. In Queens, only the libvirt compute driver +# and lvm volume driver support multiattach, and qemu must be less than 2.10 +# or libvirt must be greater than or equal to 3.10. +ENABLE_VOLUME_MULTIATTACH=$(trueorfalse False ENABLE_VOLUME_MULTIATTACH) + +# Nova hypervisor configuration. We default to libvirt with **kvm** but will +# drop back to **qemu** if we are unable to load the kvm module. ``stack.sh`` can +# also install an **LXC**, **OpenVZ** or **XenAPI** based system. If xenserver-core +# is installed, the default will be XenAPI +DEFAULT_VIRT_DRIVER=libvirt +is_package_installed xenserver-core && DEFAULT_VIRT_DRIVER=xenserver +VIRT_DRIVER=${VIRT_DRIVER:-$DEFAULT_VIRT_DRIVER} +case "$VIRT_DRIVER" in + ironic|libvirt) + LIBVIRT_TYPE=${LIBVIRT_TYPE:-kvm} + if [[ "$os_VENDOR" =~ (Debian|Ubuntu) ]]; then + # The groups change with newer libvirt. Older Ubuntu used + # 'libvirtd', but now uses libvirt like Debian. Do a quick check + # to see if libvirtd group already exists to handle grenade's case. + LIBVIRT_GROUP=$(cut -d ':' -f 1 /etc/group | grep 'libvirtd$' || true) + LIBVIRT_GROUP=${LIBVIRT_GROUP:-libvirt} + else + LIBVIRT_GROUP=libvirtd + fi + ;; + lxd) + LXD_GROUP=${LXD_GROUP:-"lxd"} + ;; + docker|zun) + DOCKER_GROUP=${DOCKER_GROUP:-"docker"} + ;; + fake) + NUMBER_FAKE_NOVA_COMPUTE=${NUMBER_FAKE_NOVA_COMPUTE:-1} + ;; + xenserver) + # Xen config common to nova and neutron + XENAPI_USER=${XENAPI_USER:-"root"} + # This user will be used for dom0 - domU communication + # should be able to log in to dom0 without a password + # will be used to install the plugins + DOMZERO_USER=${DOMZERO_USER:-"domzero"} + ;; + *) + ;; +esac + +# By default, devstack will use Ubuntu Cloud Archive. +ENABLE_UBUNTU_CLOUD_ARCHIVE=$(trueorfalse True ENABLE_UBUNTU_CLOUD_ARCHIVE) + +# Images +# ------ + +# Specify a comma-separated list of images to download and install into glance. +# Supported urls here are: +# * "uec-style" images: +# If the file ends in .tar.gz, uncompress the tarball and and select the first +# .img file inside it as the image. If present, use "*-vmlinuz*" as the kernel +# and "*-initrd*" as the ramdisk +# example: http://cloud-images.ubuntu.com/releases/precise/release/ubuntu-12.04-server-cloudimg-amd64.tar.gz +# * disk image (*.img,*.img.gz) +# if file ends in .img, then it will be uploaded and registered as a to +# glance as a disk image. If it ends in .gz, it is uncompressed first. +# example: +# http://cloud-images.ubuntu.com/releases/precise/release/ubuntu-12.04-server-cloudimg-armel-disk1.img +# http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-rootfs.img.gz +# * OpenVZ image: +# OpenVZ uses its own format of image, and does not support UEC style images + +#IMAGE_URLS="http://smoser.brickies.net/ubuntu/ttylinux-uec/ttylinux-uec-amd64-11.2_2.6.35-15_1.tar.gz" # old ttylinux-uec image +#IMAGE_URLS="http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-disk.img" # cirros full disk image + +CIRROS_VERSION=${CIRROS_VERSION:-"0.3.5"} +CIRROS_ARCH=${CIRROS_ARCH:-"x86_64"} + +# Set default image based on ``VIRT_DRIVER`` and ``LIBVIRT_TYPE``, either of +# which may be set in ``local.conf``. Also allow ``DEFAULT_IMAGE_NAME`` and +# ``IMAGE_URLS`` to be set in the `localrc` section of ``local.conf``. +DOWNLOAD_DEFAULT_IMAGES=$(trueorfalse True DOWNLOAD_DEFAULT_IMAGES) +if [[ "$DOWNLOAD_DEFAULT_IMAGES" == "True" ]]; then + if [[ -n "$IMAGE_URLS" ]]; then + IMAGE_URLS+="," + fi + case "$VIRT_DRIVER" in + libvirt) + case "$LIBVIRT_TYPE" in + lxc) # the cirros root disk in the uec tarball is empty, so it will not work for lxc + DEFAULT_IMAGE_NAME=${DEFAULT_IMAGE_NAME:-cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-rootfs} + DEFAULT_IMAGE_FILE_NAME=${DEFAULT_IMAGE_FILE_NAME:-cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-rootfs.img.gz} + IMAGE_URLS+="http://download.cirros-cloud.net/${CIRROS_VERSION}/${DEFAULT_IMAGE_FILE_NAME}";; + *) # otherwise, use the qcow image + DEFAULT_IMAGE_NAME=${DEFAULT_IMAGE_NAME:-cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-disk} + DEFAULT_IMAGE_FILE_NAME=${DEFAULT_IMAGE_FILE_NAME:-cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-disk.img} + IMAGE_URLS+="http://download.cirros-cloud.net/${CIRROS_VERSION}/${DEFAULT_IMAGE_FILE_NAME}";; + esac + ;; + vsphere) + DEFAULT_IMAGE_NAME=${DEFAULT_IMAGE_NAME:-cirros-0.3.2-i386-disk.vmdk} + DEFAULT_IMAGE_FILE_NAME=${DEFAULT_IMAGE_FILE_NAME:-$DEFAULT_IMAGE_NAME} + IMAGE_URLS+="http://partnerweb.vmware.com/programs/vmdkimage/${DEFAULT_IMAGE_FILE_NAME}";; + xenserver) + DEFAULT_IMAGE_NAME=${DEFAULT_IMAGE_NAME:-cirros-0.3.5-x86_64-disk} + DEFAULT_IMAGE_FILE_NAME=${DEFAULT_IMAGE_NAME:-cirros-0.3.5-x86_64-disk.vhd.tgz} + IMAGE_URLS+="http://ca.downloads.xensource.com/OpenStack/cirros-0.3.5-x86_64-disk.vhd.tgz" + IMAGE_URLS+=",http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-x86_64-uec.tar.gz";; + fake) + # Use the same as the default for libvirt + DEFAULT_IMAGE_NAME=${DEFAULT_IMAGE_NAME:-cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-disk} + DEFAULT_IMAGE_FILE_NAME=${DEFAULT_IMAGE_FILE_NAME:-cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-disk.img} + IMAGE_URLS+="http://download.cirros-cloud.net/${CIRROS_VERSION}/${DEFAULT_IMAGE_FILE_NAME}";; + esac + DOWNLOAD_DEFAULT_IMAGES=False +fi + +# This is a comma separated list of extra URLS to be listed for +# download by the tools/image_list.sh script. CI environments can +# pre-download these URLS and place them in $FILES. Later scripts can +# then use "get_extra_file " which will print out the path to the +# file; it will either be downloaded on demand or acquired from the +# cache if there. +EXTRA_CACHE_URLS="" + +# etcd3 defaults +ETCD_VERSION=${ETCD_VERSION:-v3.2.17} +ETCD_SHA256_AMD64=${ETCD_SHA256_AMD64:-"0a75e794502e2e76417b19da2807a9915fa58dcbf0985e397741d570f4f305cd"} +ETCD_SHA256_ARM64=${ETCD_SHA256_ARM64:-"0ab4621c44c79d17d94e43bd184d0f23b763a3669056ce4ae2d0b2942410a98f"} +ETCD_SHA256_PPC64=${ETCD_SHA256_PPC64:-"69e1279c4a2a52256b78d2a8dd23346ac46b836e678b971a459f2afaef3c275e"} +# etcd v3.2.x doesn't have anything for s390x +ETCD_SHA256_S390X=${ETCD_SHA256_S390X:-""} +# Make sure etcd3 downloads the correct architecture +if is_arch "x86_64"; then + ETCD_ARCH="amd64" + ETCD_SHA256=${ETCD_SHA256:-$ETCD_SHA256_AMD64} +elif is_arch "aarch64"; then + ETCD_ARCH="arm64" + ETCD_SHA256=${ETCD_SHA256:-$ETCD_SHA256_ARM64} +elif is_arch "ppc64le"; then + ETCD_ARCH="ppc64le" + ETCD_SHA256=${ETCD_SHA256:-$ETCD_SHA256_PPC64} +elif is_arch "s390x"; then + # An etcd3 binary for s390x is not available on github like it is + # for other arches. Only continue if a custom download URL was + # provided. + if [[ -n "${ETCD_DOWNLOAD_URL}" ]]; then + ETCD_ARCH="s390x" + ETCD_SHA256=${ETCD_SHA256:-$ETCD_SHA256_S390X} + else + exit_distro_not_supported "etcd3. No custom ETCD_DOWNLOAD_URL provided." + fi +else + exit_distro_not_supported "invalid hardware type - $ETCD_ARCH" +fi +ETCD_PORT=${ETCD_PORT:-2379} +ETCD_PEER_PORT=${ETCD_PEER_PORT:-2380} +ETCD_DOWNLOAD_URL=${ETCD_DOWNLOAD_URL:-https://github.com/coreos/etcd/releases/download} +ETCD_NAME=etcd-$ETCD_VERSION-linux-$ETCD_ARCH +ETCD_DOWNLOAD_FILE=$ETCD_NAME.tar.gz +ETCD_DOWNLOAD_LOCATION=$ETCD_DOWNLOAD_URL/$ETCD_VERSION/$ETCD_DOWNLOAD_FILE +# etcd is always required, so place it into list of pre-cached downloads +EXTRA_CACHE_URLS+=",$ETCD_DOWNLOAD_LOCATION" + +# Detect duplicate values in IMAGE_URLS +for image_url in ${IMAGE_URLS//,/ }; do + if [ $(echo "$IMAGE_URLS" | grep -o -F "$image_url" | wc -l) -gt 1 ]; then + die $LINENO "$image_url is duplicate, please remove it from IMAGE_URLS." + fi +done + +# 24Gb default volume backing file size +VOLUME_BACKING_FILE_SIZE=${VOLUME_BACKING_FILE_SIZE:-24G} + +# Prefixes for volume and instance names +VOLUME_NAME_PREFIX=${VOLUME_NAME_PREFIX:-volume-} +INSTANCE_NAME_PREFIX=${INSTANCE_NAME_PREFIX:-instance-} + +# Set default port for nova-objectstore +S3_SERVICE_PORT=${S3_SERVICE_PORT:-3333} + +# Common network names +PRIVATE_NETWORK_NAME=${PRIVATE_NETWORK_NAME:-"private"} +PUBLIC_NETWORK_NAME=${PUBLIC_NETWORK_NAME:-"public"} + +PUBLIC_INTERFACE=${PUBLIC_INTERFACE:-""} + +# Allow the use of an alternate protocol (such as https) for service endpoints +SERVICE_PROTOCOL=${SERVICE_PROTOCOL:-http} + +# Sets the maximum number of workers for most services to reduce +# the memory used where there are a large number of CPUs present +# (the default number of workers for many services is the number of CPUs) +# Also sets the minimum number of workers to 2. +API_WORKERS=${API_WORKERS:=$(( ($(nproc)/4)<2 ? 2 : ($(nproc)/4) ))} + +# Service startup timeout +SERVICE_TIMEOUT=${SERVICE_TIMEOUT:-60} + +# Timeout for compute node registration in Nova +NOVA_READY_TIMEOUT=${NOVA_READY_TIMEOUT:-$SERVICE_TIMEOUT} + +# Service graceful shutdown timeout +SERVICE_GRACEFUL_SHUTDOWN_TIMEOUT=${SERVICE_GRACEFUL_SHUTDOWN_TIMEOUT:-5} + +# Service graceful shutdown timeout +WORKER_TIMEOUT=${WORKER_TIMEOUT:-90} + +# Choose DNF on RedHat/Fedora platforms with it, or otherwise default +# to YUM. Can remove this when only dnf is supported (i.e. centos7 +# disappears) +if [[ -e /usr/bin/dnf ]]; then + YUM=${YUM:-dnf} +else + YUM=${YUM:-yum} +fi + +# Common Configuration +# -------------------- + +# Set ``OFFLINE`` to ``True`` to configure ``stack.sh`` to run cleanly without +# Internet access. ``stack.sh`` must have been previously run with Internet +# access to install prerequisites and fetch repositories. +OFFLINE=$(trueorfalse False OFFLINE) + +# Set ``ERROR_ON_CLONE`` to ``True`` to configure ``stack.sh`` to exit if +# the destination git repository does not exist during the ``git_clone`` +# operation. +ERROR_ON_CLONE=$(trueorfalse False ERROR_ON_CLONE) + +# Whether to enable the debug log level in OpenStack services +ENABLE_DEBUG_LOG_LEVEL=$(trueorfalse True ENABLE_DEBUG_LOG_LEVEL) + +# Set fixed and floating range here so we can make sure not to use addresses +# from either range when attempting to guess the IP to use for the host. +# Note that setting ``FIXED_RANGE`` may be necessary when running DevStack +# in an OpenStack cloud that uses either of these address ranges internally. +FLOATING_RANGE=${FLOATING_RANGE:-172.24.4.0/24} +IPV4_ADDRS_SAFE_TO_USE=${IPV4_ADDRS_SAFE_TO_USE:-10.0.0.0/22} +FIXED_RANGE=${FIXED_RANGE:-$IPV4_ADDRS_SAFE_TO_USE} +FIXED_NETWORK_SIZE=${FIXED_NETWORK_SIZE:-256} +HOST_IP_IFACE=${HOST_IP_IFACE:-} +HOST_IP=${HOST_IP:-} +HOST_IPV6=${HOST_IPV6:-} + +HOST_IP=$(get_default_host_ip "$FIXED_RANGE" "$FLOATING_RANGE" "$HOST_IP_IFACE" "$HOST_IP" "inet") +if [ "$HOST_IP" == "" ]; then + die $LINENO "Could not determine host ip address. See local.conf for suggestions on setting HOST_IP." +fi + +HOST_IPV6=$(get_default_host_ip "" "" "$HOST_IP_IFACE" "$HOST_IPV6" "inet6") + +# Whether or not the port_security extension should be enabled for Neutron. +NEUTRON_PORT_SECURITY=$(trueorfalse True NEUTRON_PORT_SECURITY) + +# SERVICE IP version +# This is the IP version that services should be listening on, as well +# as using to register their endpoints with keystone. +SERVICE_IP_VERSION=${SERVICE_IP_VERSION:-4} + +# Validate SERVICE_IP_VERSION +# It would be nice to support "4+6" here as well, but that will require +# multiple calls into keystone to register endpoints, so for now let's +# just support one or the other. +if [[ $SERVICE_IP_VERSION != "4" ]] && [[ $SERVICE_IP_VERSION != "6" ]]; then + die $LINENO "SERVICE_IP_VERSION must be either 4 or 6" +fi + +if [[ "$SERVICE_IP_VERSION" == 4 ]]; then + DEF_SERVICE_HOST=$HOST_IP + DEF_SERVICE_LOCAL_HOST=127.0.0.1 + DEF_SERVICE_LISTEN_ADDRESS=0.0.0.0 +fi + +if [[ "$SERVICE_IP_VERSION" == 6 ]]; then + if [ "$HOST_IPV6" == "" ]; then + die $LINENO "Could not determine host IPv6 address. See local.conf for suggestions on setting HOST_IPV6." + fi + + DEF_SERVICE_HOST=[$HOST_IPV6] + DEF_SERVICE_LOCAL_HOST=::1 + DEF_SERVICE_LISTEN_ADDRESS="[::]" +fi + +# This is either 0.0.0.0 for IPv4 or [::] for IPv6 +SERVICE_LISTEN_ADDRESS=${SERVICE_LISTEN_ADDRESS:-${DEF_SERVICE_LISTEN_ADDRESS}} + +# Allow the use of an alternate hostname (such as localhost/127.0.0.1) for +# service endpoints. Default is dependent on SERVICE_IP_VERSION above. +SERVICE_HOST=${SERVICE_HOST:-${DEF_SERVICE_HOST}} +# This is either 127.0.0.1 for IPv4 or ::1 for IPv6 +SERVICE_LOCAL_HOST=${SERVICE_LOCAL_HOST:-${DEF_SERVICE_LOCAL_HOST}} + +REGION_NAME=${REGION_NAME:-RegionOne} + +# Configure services to use syslog instead of writing to individual log files +SYSLOG=$(trueorfalse False SYSLOG) +SYSLOG_HOST=${SYSLOG_HOST:-$HOST_IP} +SYSLOG_PORT=${SYSLOG_PORT:-516} + +# Set global ``GIT_DEPTH=`` to limit the history depth of the git clone +# Set to 0 to disable shallow cloning +GIT_DEPTH=${GIT_DEPTH:-0} + +# We may not need to recreate database in case 2 Keystone services +# sharing the same database. It would be useful for multinode Grenade tests. +RECREATE_KEYSTONE_DB=$(trueorfalse True RECREATE_KEYSTONE_DB) + +# Following entries need to be last items in file + +# New way is LOGDIR for all logs and LOGFILE for stack.sh trace log, but if not fully-qualified will be in LOGDIR +# LOGFILE LOGDIR output +# not set not set (new) set LOGDIR from default +# set not set stack.sh log to LOGFILE, (new) set LOGDIR from LOGFILE +# not set set screen logs to LOGDIR +# set set stack.sh log to LOGFILE, screen logs to LOGDIR + +# Set up new logging defaults +if [[ -z "${LOGDIR:-}" ]]; then + default_logdir=$DEST/logs + if [[ -z "${LOGFILE:-}" ]]; then + # Nothing is set, we need a default + LOGDIR="$default_logdir" + else + # Set default LOGDIR + LOGDIR="${LOGFILE%/*}" + logfile="${LOGFILE##*/}" + if [[ -z "$LOGDIR" || "$LOGDIR" == "$logfile" ]]; then + # LOGFILE had no path, set a default + LOGDIR="$default_logdir" + fi + fi + unset default_logdir logfile +fi + +# ``LOGDIR`` is always set at this point so it is not useful as a 'enable' for service logs + +# System-wide ulimit file descriptors override +ULIMIT_NOFILE=${ULIMIT_NOFILE:-2048} + +# Local variables: +# mode: shell-script +# End: diff --git a/devstack/install.sls b/devstack/install.sls index fdf0470..edf8098 100644 --- a/devstack/install.sls +++ b/devstack/install.sls @@ -24,6 +24,19 @@ openstack-devstack git cloned: - user: openstack-devstack ensure user and group exist - pkg: openstack-devstack ensure package dependencies +openstack-devstack configure stackrc: + file.managed: + - name: {{ devstack.dir.dest }}/stackrc + - source: salt://devstack/files/stackrc.j2 + - user: {{ devstack.local.username }} + - group: {{ devstack.local.username }} + - makedirs: True + - mode: {{ devstack.mode }} + - template: jinja + - context: + data: {{ devstack.local|json }} + dir: {{ devstack.dir|json }} + openstack-devstack configure local_conf: file.managed: - name: {{ devstack.dir.dest }}/local.conf @@ -38,16 +51,15 @@ openstack-devstack configure local_conf: dir: {{ devstack.dir|json }} cmd.run: - names: - - chown -R {{ devstack.local.username }}:{{ devstack.local.username }} {{ devstack.dir.dest }} + - chown -R {{devstack.local.username}}:{{devstack.local.username}} {{devstack.dir.dest}} openstack-devstack run stack: cmd.run: - - names: - - {{ devstack.dir.dest }}/stack.sh + - name: {{ devstack.dir.dest }}/stack.sh - hide_output: {{ devstack.hide_output }} - env: - HOST_IP: {{ grains.ipv4[-1] if not devstack.local.host_ip else devstack.local.host_ip }} - - HOST_IPV6: {{ grains.ipv6[-1] if not devstack.local.host_ipv6 else devstack.local.host_ipv6 }} + - HOST_IPV6: {{grains.ipv6[-1] if not devstack.local.host_ipv6 else devstack.local.host_ipv6}} - runas: {{ devstack.local.username }} - require: - file: openstack-devstack configure local_conf