ironic.conf

[DEFAULT]
auth_strategy = noauth
debug = true
default_boot_interface = ipxe
default_deploy_interface = direct
default_inspect_interface = inspector
default_network_interface = noop
enabled_bios_interfaces = idrac-wsman,no-bios
enabled_boot_interfaces = pxe,ipxe,fake,redfish-virtual-media,idrac-redfish-virtual-media
enabled_deploy_interfaces = direct,fake
# NOTE(dtantsur): when changing this, make sure to update the driver
# dependencies in Dockerfile.
enabled_hardware_types = ipmi,idrac,irmc,fake-hardware,redfish,ibmc
enabled_inspect_interfaces = inspector,idrac,irmc,fake,redfish
enabled_management_interfaces = ipmitool,idrac,irmc,fake,redfish,idrac-redfish,ibmc
enabled_power_interfaces = ipmitool,idrac,irmc,fake,redfish,idrac-redfish,ibmc
enabled_raid_interfaces = no-raid,irmc,agent,fake,ibmc,idrac-wsman
enabled_vendor_interfaces = ipmitool,no-vendor,idrac,fake,ibmc
rpc_transport = json-rpc
use_stderr = true
require_agent_token = true
# NOTE(dtantsur): the default md5 is not compatible with FIPS mode
hash_ring_algorithm = sha256

[agent]
deploy_logs_collect = always
deploy_logs_local_path = /shared/log/ironic/deploy
# NOTE(dtantsur): in some environments temporary networking issues can cause
# the whole deployment to fail on inability to reach the ramdisk. Increasing
# retries here works around such problems without affecting the normal path.
# See https://bugzilla.redhat.com/show_bug.cgi?id=1822763
max_command_attempts = 30

[conductor]
automated_clean = true
# NOTE(dtantsur): keep aligned with [pxe]boot_retry_timeout below.
deploy_callback_timeout = 4800
send_sensor_data = true
# NOTE(TheJulia): Do not lower this value below 120 seconds.
# Power state is checked every 60 seconds and BMC activity should
# be avoided more often than once every sixty seconds.
send_sensor_data_interval = 160

[json_rpc]
auth_strategy = noauth
host_ip = localhost

[deploy]
default_boot_option = local
erase_devices_metadata_priority = 10
erase_devices_priority = 0
http_root = /shared/html/

[dhcp]
dhcp_provider = none

[oslo_messaging_notifications]
driver = prometheus_exporter
location = /shared/ironic_prometheus_exporter
transport_url = fake://

[pxe]
# NOTE(dtantsur): keep this value at least 3x lower than
# [conductor]deploy_callback_timeout so that at least some retries happen.
# The default settings enable 3 retries after 20 minutes each.
boot_retry_timeout = 1200
images_path = /shared/html/tmp
instance_master_path = /shared/html/master_images
ipxe_enabled = true
pxe_config_template = $pybasedir/drivers/modules/ipxe_config.template
tftp_master_path = /shared/tftpboot
tftp_root = /shared/tftpboot
uefi_pxe_config_template = $pybasedir/drivers/modules/ipxe_config.template

[redfish]
use_swift = false

[ipmi]
# use_ipmitool_retries transfers the responsibility of retrying to ipmitool
# when supported. If set to false, then ipmitool is called as follows :
#    $ipmitool -R 1 -N 1 ...
# and Ironic handles the retry loop.
use_ipmitool_retries = true
# The following parameters are the defaults in Ironic. They are used in the
# following way if use_ipmitool_retries is set to true:
#    $ipmitool -R <X> -N <Y> ...
# where :
#    X = command_retry_timeout / min_command_interval
#    Y = min_command_interval
# If use_ipmitool_retries is false, then ironic retries X times, with an
# interval of Y in between each tries.
min_command_interval = 5
command_retry_timeout = 60