my Vaillant Recovair Unit VAR 260/4 - Boost

[Hexcodes]

Before requesting a new feature / a new sensor

• The feature I'm requesting exists in the myVAILLANT app, and I attached a screenshot
• I tested the latest release, and it's missing there
• I've attached exported data of my system

Describe the feature you want

In my Vaillant im able to set the Speed (1-6) of my Recovair Unit VAR 260/4 and also enbale the boot mode of the devices.
When I try to do the boosst mode in Home Assistant using the addon I only get "Not supported on VRC700 controllers for the function "ventilation boost".
I would expect to at least enable the boost function, but better would be to also be able to set the speed level in home assistant.

[signalkraft]

Since I don't have a recovair unit, I would need a lot more information to help with this.

For each state (speed levels, boost) I would need test data and a screenshot of the app that shows how it's displayed.

[Hexcodes]

Hey,
no problem :)
I added some testfiles in the attachment.
Seems the settings are in:
ventilations: - index: 0 maximumDayFanStage: 2 maximumNightFanStage: 5 operationModeVentilation: AUTO
whereby maximumDayFanStage means the ventilation setting for day, maximumNightFanStage means the ventilation setting at night.
operationModeVentilation -> AUTO for automatic change between day and night, DAY for forced day mode, SET_BACK for night (don't know why it's named like that?)

Besides this we have another block for boost mode:
ventilations: - index: 0 currentSpecialFunction: VENTILATION_BOOST
whereby the currentSpecialFunction of ventilation is changed.
yaml.zip

[Hexcodes]

Besides this i noticed that i can get the cycles and also working time in myvaillant app, which is also indicated in the output above
rts: statistics: - deviceId: xxx operationTime: 2366 onOffCycles: 48 - deviceId: xxx operationTime: 72 onOffCycles: 1
but missing in HomeAssistant - so seems like this information is not getting through home assistant? I only see the cycles and working time of the hydraulic station and this information seems to be somehow reseted by the device in case of power outtage, whereby the outdoor unit counts correctly.

[Hexcodes]

Same for mpc: devices: - deviceId: xxx currentPower: 409 - deviceId: xxx currentPower: 3
which isn't getting trough to home assistant.