From 999ec0a7f2f88cb50d6cf55949c707f63c4f0528 Mon Sep 17 00:00:00 2001 From: Pradchaya Phucharoen Date: Thu, 9 May 2019 14:05:21 +0700 Subject: [PATCH] [devices]: Add HLX a dps200 psu driver (#2871) --- .../debian/platform-modules-haliburton.init | 4 + .../haliburton/modules/Makefile | 2 +- .../haliburton/modules/dps200.c | 128 ++++++ .../haliburton/modules/pmbus.h | 425 ++++++++++++++++++ 4 files changed, 558 insertions(+), 1 deletion(-) create mode 100644 platform/broadcom/sonic-platform-modules-cel/haliburton/modules/dps200.c create mode 100644 platform/broadcom/sonic-platform-modules-cel/haliburton/modules/pmbus.h diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.init b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.init index db0e8cfdb820..af74da87d5d3 100644 --- a/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.init +++ b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.init @@ -17,6 +17,7 @@ start) modprobe smc modprobe hlx_gpio_ich + modprobe dps200 found=0 for devnum in 0 1; do @@ -51,6 +52,9 @@ start) echo max6697 0x1a > /sys/bus/i2c/devices/i2c-3/new_device echo max6697 0x1a > /sys/bus/i2c/devices/i2c-11/new_device + # Attach PSUs + echo dps200 0x5a > /sys/bus/i2c/devices/i2c-12/new_device + echo dps200 0x5b > /sys/bus/i2c/devices/i2c-13/new_device # Attach fans echo emc2305 0x4d > /sys/bus/i2c/devices/i2c-23/new_device diff --git a/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/Makefile b/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/Makefile index b34cf2cabe20..415d1b5e62f0 100644 --- a/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/Makefile +++ b/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/Makefile @@ -1 +1 @@ -obj-m := mc24lc64t.o emc2305.o smc.o hlx_gpio_ich.o +obj-m := mc24lc64t.o emc2305.o smc.o hlx_gpio_ich.o dps200.o diff --git a/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/dps200.c b/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/dps200.c new file mode 100644 index 000000000000..6d5afdfb78b0 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/dps200.c @@ -0,0 +1,128 @@ +/* + * Hardware monitoring driver for Delta DPS200 + * + * (C) Copyright 2019, Celestica Inc. + * Author: Pradchaya Phucharoen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "pmbus.h" + + +static int dps200_read_word_data(struct i2c_client *client, int page, int reg) +{ + + if (reg >= PMBUS_VIRT_BASE || + reg == PMBUS_VOUT_OV_FAULT_LIMIT || + reg == PMBUS_VOUT_OV_WARN_LIMIT || + reg == PMBUS_VOUT_UV_WARN_LIMIT || + reg == PMBUS_VOUT_UV_FAULT_LIMIT || + reg == PMBUS_IOUT_OC_LV_FAULT_LIMIT || + reg == PMBUS_IOUT_UC_FAULT_LIMIT || + reg == PMBUS_UT_WARN_LIMIT || + reg == PMBUS_UT_FAULT_LIMIT || + reg == PMBUS_VIN_OV_FAULT_LIMIT || + reg == PMBUS_VIN_OV_WARN_LIMIT || + reg == PMBUS_IIN_OC_FAULT_LIMIT || + reg == PMBUS_POUT_MAX) + return -ENXIO; + + /* + * WARNING: The following feild have coinstant driver value. + * If the register are + * PMBUS_IOUT_OC_WARN_LIMIT or PMBUS_IOUT_OC_FAULT_LIMIT convert + * the constant value from linear to direct fomat. + */ + if (reg == PMBUS_IOUT_OC_WARN_LIMIT) + return 0xb4; + else if (reg == PMBUS_IOUT_OC_FAULT_LIMIT) + return 0xc8; + else + return pmbus_read_word_data(client, page, reg); +} + +/* + * Form DPS-200 datasheet the supported sensors format defined as: + * VOUT: direct mode with one decimal place. + * + * Other sensors: + * IOUT: direct mode with one decimal place. + * IOUT Limits: linear mode, which difference from IOUT. + * VIN, IIN, POWER, TEMP, & FAN: linear mode. + */ +static struct pmbus_driver_info dps200_info = { + .pages = 1, + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT + | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT + | PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 + | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_TEMP + | PMBUS_HAVE_STATUS_INPUT, + .format = { + [PSC_VOLTAGE_OUT] = direct, + [PSC_CURRENT_OUT] = direct, + }, + .m = { + [PSC_VOLTAGE_OUT] = 10, + [PSC_CURRENT_OUT] = 10, + }, + .b = { + [PSC_VOLTAGE_OUT] = 0, + [PSC_CURRENT_OUT] = 0, + }, + .R = { + [PSC_VOLTAGE_OUT] = 0, + [PSC_CURRENT_OUT] = 0, + }, + .read_word_data = &dps200_read_word_data, +}; + +static int pmbus_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + return pmbus_do_probe(client, id, &dps200_info); +} +/* user driver datat to pass the grpup */ +static const struct i2c_device_id dps200_id[] = { + {"dps200", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, dps200_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver dps200_driver = { + .driver = { + .name = "dps200", + }, + .probe = pmbus_probe, + .remove = pmbus_do_remove, + .id_table = dps200_id, +}; + +module_i2c_driver(dps200_driver); + +MODULE_AUTHOR("Pradchaya Phucharoen"); +MODULE_DESCRIPTION("PMBus driver for Delta DPS200"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/pmbus.h b/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/pmbus.h new file mode 100644 index 000000000000..521baf6da49a --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/pmbus.h @@ -0,0 +1,425 @@ +/* + * pmbus.h - Common defines and structures for PMBus devices + * + * Copyright (c) 2010, 2011 Ericsson AB. + * Copyright (c) 2012 Guenter Roeck + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef PMBUS_H +#define PMBUS_H + +#include +#include + +/* + * Registers + */ +enum pmbus_regs { + PMBUS_PAGE = 0x00, + PMBUS_OPERATION = 0x01, + PMBUS_ON_OFF_CONFIG = 0x02, + PMBUS_CLEAR_FAULTS = 0x03, + PMBUS_PHASE = 0x04, + + PMBUS_CAPABILITY = 0x19, + PMBUS_QUERY = 0x1A, + + PMBUS_VOUT_MODE = 0x20, + PMBUS_VOUT_COMMAND = 0x21, + PMBUS_VOUT_TRIM = 0x22, + PMBUS_VOUT_CAL_OFFSET = 0x23, + PMBUS_VOUT_MAX = 0x24, + PMBUS_VOUT_MARGIN_HIGH = 0x25, + PMBUS_VOUT_MARGIN_LOW = 0x26, + PMBUS_VOUT_TRANSITION_RATE = 0x27, + PMBUS_VOUT_DROOP = 0x28, + PMBUS_VOUT_SCALE_LOOP = 0x29, + PMBUS_VOUT_SCALE_MONITOR = 0x2A, + + PMBUS_COEFFICIENTS = 0x30, + PMBUS_POUT_MAX = 0x31, + + PMBUS_FAN_CONFIG_12 = 0x3A, + PMBUS_FAN_COMMAND_1 = 0x3B, + PMBUS_FAN_COMMAND_2 = 0x3C, + PMBUS_FAN_CONFIG_34 = 0x3D, + PMBUS_FAN_COMMAND_3 = 0x3E, + PMBUS_FAN_COMMAND_4 = 0x3F, + + PMBUS_VOUT_OV_FAULT_LIMIT = 0x40, + PMBUS_VOUT_OV_FAULT_RESPONSE = 0x41, + PMBUS_VOUT_OV_WARN_LIMIT = 0x42, + PMBUS_VOUT_UV_WARN_LIMIT = 0x43, + PMBUS_VOUT_UV_FAULT_LIMIT = 0x44, + PMBUS_VOUT_UV_FAULT_RESPONSE = 0x45, + PMBUS_IOUT_OC_FAULT_LIMIT = 0x46, + PMBUS_IOUT_OC_FAULT_RESPONSE = 0x47, + PMBUS_IOUT_OC_LV_FAULT_LIMIT = 0x48, + PMBUS_IOUT_OC_LV_FAULT_RESPONSE = 0x49, + PMBUS_IOUT_OC_WARN_LIMIT = 0x4A, + PMBUS_IOUT_UC_FAULT_LIMIT = 0x4B, + PMBUS_IOUT_UC_FAULT_RESPONSE = 0x4C, + + PMBUS_OT_FAULT_LIMIT = 0x4F, + PMBUS_OT_FAULT_RESPONSE = 0x50, + PMBUS_OT_WARN_LIMIT = 0x51, + PMBUS_UT_WARN_LIMIT = 0x52, + PMBUS_UT_FAULT_LIMIT = 0x53, + PMBUS_UT_FAULT_RESPONSE = 0x54, + PMBUS_VIN_OV_FAULT_LIMIT = 0x55, + PMBUS_VIN_OV_FAULT_RESPONSE = 0x56, + PMBUS_VIN_OV_WARN_LIMIT = 0x57, + PMBUS_VIN_UV_WARN_LIMIT = 0x58, + PMBUS_VIN_UV_FAULT_LIMIT = 0x59, + + PMBUS_IIN_OC_FAULT_LIMIT = 0x5B, + PMBUS_IIN_OC_WARN_LIMIT = 0x5D, + + PMBUS_POUT_OP_FAULT_LIMIT = 0x68, + PMBUS_POUT_OP_WARN_LIMIT = 0x6A, + PMBUS_PIN_OP_WARN_LIMIT = 0x6B, + + PMBUS_STATUS_BYTE = 0x78, + PMBUS_STATUS_WORD = 0x79, + PMBUS_STATUS_VOUT = 0x7A, + PMBUS_STATUS_IOUT = 0x7B, + PMBUS_STATUS_INPUT = 0x7C, + PMBUS_STATUS_TEMPERATURE = 0x7D, + PMBUS_STATUS_CML = 0x7E, + PMBUS_STATUS_OTHER = 0x7F, + PMBUS_STATUS_MFR_SPECIFIC = 0x80, + PMBUS_STATUS_FAN_12 = 0x81, + PMBUS_STATUS_FAN_34 = 0x82, + + PMBUS_READ_VIN = 0x88, + PMBUS_READ_IIN = 0x89, + PMBUS_READ_VCAP = 0x8A, + PMBUS_READ_VOUT = 0x8B, + PMBUS_READ_IOUT = 0x8C, + PMBUS_READ_TEMPERATURE_1 = 0x8D, + PMBUS_READ_TEMPERATURE_2 = 0x8E, + PMBUS_READ_TEMPERATURE_3 = 0x8F, + PMBUS_READ_FAN_SPEED_1 = 0x90, + PMBUS_READ_FAN_SPEED_2 = 0x91, + PMBUS_READ_FAN_SPEED_3 = 0x92, + PMBUS_READ_FAN_SPEED_4 = 0x93, + PMBUS_READ_DUTY_CYCLE = 0x94, + PMBUS_READ_FREQUENCY = 0x95, + PMBUS_READ_POUT = 0x96, + PMBUS_READ_PIN = 0x97, + + PMBUS_REVISION = 0x98, + PMBUS_MFR_ID = 0x99, + PMBUS_MFR_MODEL = 0x9A, + PMBUS_MFR_REVISION = 0x9B, + PMBUS_MFR_LOCATION = 0x9C, + PMBUS_MFR_DATE = 0x9D, + PMBUS_MFR_SERIAL = 0x9E, + +/* + * Virtual registers. + * Useful to support attributes which are not supported by standard PMBus + * registers but exist as manufacturer specific registers on individual chips. + * Must be mapped to real registers in device specific code. + * + * Semantics: + * Virtual registers are all word size. + * READ registers are read-only; writes are either ignored or return an error. + * RESET registers are read/write. Reading reset registers returns zero + * (used for detection), writing any value causes the associated history to be + * reset. + * Virtual registers have to be handled in device specific driver code. Chip + * driver code returns non-negative register values if a virtual register is + * supported, or a negative error code if not. The chip driver may return + * -ENODATA or any other error code in this case, though an error code other + * than -ENODATA is handled more efficiently and thus preferred. Either case, + * the calling PMBus core code will abort if the chip driver returns an error + * code when reading or writing virtual registers. + */ + PMBUS_VIRT_BASE = 0x100, + PMBUS_VIRT_READ_TEMP_AVG, + PMBUS_VIRT_READ_TEMP_MIN, + PMBUS_VIRT_READ_TEMP_MAX, + PMBUS_VIRT_RESET_TEMP_HISTORY, + PMBUS_VIRT_READ_VIN_AVG, + PMBUS_VIRT_READ_VIN_MIN, + PMBUS_VIRT_READ_VIN_MAX, + PMBUS_VIRT_RESET_VIN_HISTORY, + PMBUS_VIRT_READ_IIN_AVG, + PMBUS_VIRT_READ_IIN_MIN, + PMBUS_VIRT_READ_IIN_MAX, + PMBUS_VIRT_RESET_IIN_HISTORY, + PMBUS_VIRT_READ_PIN_AVG, + PMBUS_VIRT_READ_PIN_MIN, + PMBUS_VIRT_READ_PIN_MAX, + PMBUS_VIRT_RESET_PIN_HISTORY, + PMBUS_VIRT_READ_POUT_AVG, + PMBUS_VIRT_READ_POUT_MIN, + PMBUS_VIRT_READ_POUT_MAX, + PMBUS_VIRT_RESET_POUT_HISTORY, + PMBUS_VIRT_READ_VOUT_AVG, + PMBUS_VIRT_READ_VOUT_MIN, + PMBUS_VIRT_READ_VOUT_MAX, + PMBUS_VIRT_RESET_VOUT_HISTORY, + PMBUS_VIRT_READ_IOUT_AVG, + PMBUS_VIRT_READ_IOUT_MIN, + PMBUS_VIRT_READ_IOUT_MAX, + PMBUS_VIRT_RESET_IOUT_HISTORY, + PMBUS_VIRT_READ_TEMP2_AVG, + PMBUS_VIRT_READ_TEMP2_MIN, + PMBUS_VIRT_READ_TEMP2_MAX, + PMBUS_VIRT_RESET_TEMP2_HISTORY, + + PMBUS_VIRT_READ_VMON, + PMBUS_VIRT_VMON_UV_WARN_LIMIT, + PMBUS_VIRT_VMON_OV_WARN_LIMIT, + PMBUS_VIRT_VMON_UV_FAULT_LIMIT, + PMBUS_VIRT_VMON_OV_FAULT_LIMIT, + PMBUS_VIRT_STATUS_VMON, +}; + +/* + * OPERATION + */ +#define PB_OPERATION_CONTROL_ON BIT(7) + +/* + * CAPABILITY + */ +#define PB_CAPABILITY_SMBALERT BIT(4) +#define PB_CAPABILITY_ERROR_CHECK BIT(7) + +/* + * VOUT_MODE + */ +#define PB_VOUT_MODE_MODE_MASK 0xe0 +#define PB_VOUT_MODE_PARAM_MASK 0x1f + +#define PB_VOUT_MODE_LINEAR 0x00 +#define PB_VOUT_MODE_VID 0x20 +#define PB_VOUT_MODE_DIRECT 0x40 + +/* + * Fan configuration + */ +#define PB_FAN_2_PULSE_MASK (BIT(0) | BIT(1)) +#define PB_FAN_2_RPM BIT(2) +#define PB_FAN_2_INSTALLED BIT(3) +#define PB_FAN_1_PULSE_MASK (BIT(4) | BIT(5)) +#define PB_FAN_1_RPM BIT(6) +#define PB_FAN_1_INSTALLED BIT(7) + +/* + * STATUS_BYTE, STATUS_WORD (lower) + */ +#define PB_STATUS_NONE_ABOVE BIT(0) +#define PB_STATUS_CML BIT(1) +#define PB_STATUS_TEMPERATURE BIT(2) +#define PB_STATUS_VIN_UV BIT(3) +#define PB_STATUS_IOUT_OC BIT(4) +#define PB_STATUS_VOUT_OV BIT(5) +#define PB_STATUS_OFF BIT(6) +#define PB_STATUS_BUSY BIT(7) + +/* + * STATUS_WORD (upper) + */ +#define PB_STATUS_UNKNOWN BIT(8) +#define PB_STATUS_OTHER BIT(9) +#define PB_STATUS_FANS BIT(10) +#define PB_STATUS_POWER_GOOD_N BIT(11) +#define PB_STATUS_WORD_MFR BIT(12) +#define PB_STATUS_INPUT BIT(13) +#define PB_STATUS_IOUT_POUT BIT(14) +#define PB_STATUS_VOUT BIT(15) + +/* + * STATUS_IOUT + */ +#define PB_POUT_OP_WARNING BIT(0) +#define PB_POUT_OP_FAULT BIT(1) +#define PB_POWER_LIMITING BIT(2) +#define PB_CURRENT_SHARE_FAULT BIT(3) +#define PB_IOUT_UC_FAULT BIT(4) +#define PB_IOUT_OC_WARNING BIT(5) +#define PB_IOUT_OC_LV_FAULT BIT(6) +#define PB_IOUT_OC_FAULT BIT(7) + +/* + * STATUS_VOUT, STATUS_INPUT + */ +#define PB_VOLTAGE_UV_FAULT BIT(4) +#define PB_VOLTAGE_UV_WARNING BIT(5) +#define PB_VOLTAGE_OV_WARNING BIT(6) +#define PB_VOLTAGE_OV_FAULT BIT(7) + +/* + * STATUS_INPUT + */ +#define PB_PIN_OP_WARNING BIT(0) +#define PB_IIN_OC_WARNING BIT(1) +#define PB_IIN_OC_FAULT BIT(2) + +/* + * STATUS_TEMPERATURE + */ +#define PB_TEMP_UT_FAULT BIT(4) +#define PB_TEMP_UT_WARNING BIT(5) +#define PB_TEMP_OT_WARNING BIT(6) +#define PB_TEMP_OT_FAULT BIT(7) + +/* + * STATUS_FAN + */ +#define PB_FAN_AIRFLOW_WARNING BIT(0) +#define PB_FAN_AIRFLOW_FAULT BIT(1) +#define PB_FAN_FAN2_SPEED_OVERRIDE BIT(2) +#define PB_FAN_FAN1_SPEED_OVERRIDE BIT(3) +#define PB_FAN_FAN2_WARNING BIT(4) +#define PB_FAN_FAN1_WARNING BIT(5) +#define PB_FAN_FAN2_FAULT BIT(6) +#define PB_FAN_FAN1_FAULT BIT(7) + +/* + * CML_FAULT_STATUS + */ +#define PB_CML_FAULT_OTHER_MEM_LOGIC BIT(0) +#define PB_CML_FAULT_OTHER_COMM BIT(1) +#define PB_CML_FAULT_PROCESSOR BIT(3) +#define PB_CML_FAULT_MEMORY BIT(4) +#define PB_CML_FAULT_PACKET_ERROR BIT(5) +#define PB_CML_FAULT_INVALID_DATA BIT(6) +#define PB_CML_FAULT_INVALID_COMMAND BIT(7) + +enum pmbus_sensor_classes { + PSC_VOLTAGE_IN = 0, + PSC_VOLTAGE_OUT, + PSC_CURRENT_IN, + PSC_CURRENT_OUT, + PSC_POWER, + PSC_TEMPERATURE, + PSC_FAN, + PSC_NUM_CLASSES /* Number of power sensor classes */ +}; + +#define PMBUS_PAGES 32 /* Per PMBus specification */ + +/* Functionality bit mask */ +#define PMBUS_HAVE_VIN BIT(0) +#define PMBUS_HAVE_VCAP BIT(1) +#define PMBUS_HAVE_VOUT BIT(2) +#define PMBUS_HAVE_IIN BIT(3) +#define PMBUS_HAVE_IOUT BIT(4) +#define PMBUS_HAVE_PIN BIT(5) +#define PMBUS_HAVE_POUT BIT(6) +#define PMBUS_HAVE_FAN12 BIT(7) +#define PMBUS_HAVE_FAN34 BIT(8) +#define PMBUS_HAVE_TEMP BIT(9) +#define PMBUS_HAVE_TEMP2 BIT(10) +#define PMBUS_HAVE_TEMP3 BIT(11) +#define PMBUS_HAVE_STATUS_VOUT BIT(12) +#define PMBUS_HAVE_STATUS_IOUT BIT(13) +#define PMBUS_HAVE_STATUS_INPUT BIT(14) +#define PMBUS_HAVE_STATUS_TEMP BIT(15) +#define PMBUS_HAVE_STATUS_FAN12 BIT(16) +#define PMBUS_HAVE_STATUS_FAN34 BIT(17) +#define PMBUS_HAVE_VMON BIT(18) +#define PMBUS_HAVE_STATUS_VMON BIT(19) + +enum pmbus_data_format { linear = 0, direct, vid }; +enum vrm_version { vr11 = 0, vr12 }; + +struct pmbus_driver_info { + int pages; /* Total number of pages */ + enum pmbus_data_format format[PSC_NUM_CLASSES]; + enum vrm_version vrm_version; + /* + * Support one set of coefficients for each sensor type + * Used for chips providing data in direct mode. + */ + int m[PSC_NUM_CLASSES]; /* mantissa for direct data format */ + int b[PSC_NUM_CLASSES]; /* offset */ + int R[PSC_NUM_CLASSES]; /* exponent */ + + u32 func[PMBUS_PAGES]; /* Functionality, per page */ + /* + * The following functions map manufacturing specific register values + * to PMBus standard register values. Specify only if mapping is + * necessary. + * Functions return the register value (read) or zero (write) if + * successful. A return value of -ENODATA indicates that there is no + * manufacturer specific register, but that a standard PMBus register + * may exist. Any other negative return value indicates that the + * register does not exist, and that no attempt should be made to read + * the standard register. + */ + int (*read_byte_data)(struct i2c_client *client, int page, int reg); + int (*read_word_data)(struct i2c_client *client, int page, int reg); + int (*write_word_data)(struct i2c_client *client, int page, int reg, + u16 word); + int (*write_byte)(struct i2c_client *client, int page, u8 value); + /* + * The identify function determines supported PMBus functionality. + * This function is only necessary if a chip driver supports multiple + * chips, and the chip functionality is not pre-determined. + */ + int (*identify)(struct i2c_client *client, + struct pmbus_driver_info *info); + + /* Regulator functionality, if supported by this chip driver. */ + int num_regulators; + const struct regulator_desc *reg_desc; +}; + +/* Regulator ops */ + +extern const struct regulator_ops pmbus_regulator_ops; + +/* Macro for filling in array of struct regulator_desc */ +#define PMBUS_REGULATOR(_name, _id) \ + [_id] = { \ + .name = (_name # _id), \ + .id = (_id), \ + .of_match = of_match_ptr(_name # _id), \ + .regulators_node = of_match_ptr("regulators"), \ + .ops = &pmbus_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + } + +/* Function declarations */ + +void pmbus_clear_cache(struct i2c_client *client); +int pmbus_set_page(struct i2c_client *client, u8 page); +int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg); +int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word); +int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg); +int pmbus_write_byte(struct i2c_client *client, int page, u8 value); +int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg, + u8 value); +int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg, + u8 mask, u8 value); +void pmbus_clear_faults(struct i2c_client *client); +bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg); +bool pmbus_check_word_register(struct i2c_client *client, int page, int reg); +int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, + struct pmbus_driver_info *info); +int pmbus_do_remove(struct i2c_client *client); +const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client + *client); + +#endif /* PMBUS_H */ \ No newline at end of file