Skip to content

Latest commit

 

History

History
35 lines (23 loc) · 1.8 KB

README.md

File metadata and controls

35 lines (23 loc) · 1.8 KB
Raw
Speeduino

License Sponsors https://img.shields.io/discord/879495735912071269

A low cost, DIY friendly Engine Management System (ECU) based on the Arduino framework

Speeduino Airbear

Airbear is an add-on board for Speeduino based ECUs based on the ESP32-C3 chip.It is designed to add a bluetooth and wifi interface to Speeduino ECUs, including a web based dash.

It is currently in VERY early stages of development and is not yet ready for use.

Documentation

In progress

Hardware

Any ESP32-C3 board will work, however the intended target board is the low cost ESP32-C3 Supermini This can be found on many retailers including AliExpress and eBay.

Usage

Airbear consists of 2 main components, the firmware on the board itself and the web based dashboard.

The firmware should be installed via PlatformIO:

  1. Open the project folder in PlatformIO
  2. Go to the PlatformIO tab on the left hand side
  3. From within the 'Project Tasks' menu, select 'Upload'
  4. From within the same menu, select 'Upload Filesystem Image'

Once the firmware is loaded on the board, configuration can be performed via the web interface. Initially the board will create a wifi AP with the SSID 'Speeduino Dash' and no password. Connect to this wifi network and then open a browser to http://speeduino.local/config in order to configure the unit.