README.md

SHRP for Tolino eInk reader devices

State

SHRP builds and is fully functional (hopefully).

Known working devices

• Tolino Page
• Tolino Page 2
• Tolino Shine 2 HD
• Tolino Vision 2 HD
• Tolino Vision 3 HD
• Tolino Vision 4 HD
• Tolino Epos

Test without installation

1. enter fastboot;
2. in cmd do fastboot boot <path_to_recovery_image>

Installation

1. enter fastboot;
2. in cmd do fastboot flash recovery <path_to_recovery_image>

How to enter recovery

1. completely turn off device;
2. press and hold "back" button;
3. press and hold "glowlight" button;
4. turn device on;
5. wait while device turns on while holding both buttons;

How to enter fastboot

1. completely turn off device;
2. press and hold "glowlight" button;
3. press and hold "power" button;
4. wait while device turns on while holding both buttons;

How to build TWRP

1. repo init --depth=1 -u https://github.com/SHRP/manifest.git -b v3_9.0
2. `repo sync -c -j$(nproc --all) --force-sync --no-clone-bundle --no-tags
3. clone this repo to <shrp_repo>/device/TOLINO/tolino_generic
4. apply patches from <shrp_repo>/device/TOLINO/tolino_generic/patches directory
5. open terminal in <shrp_repo> directory;
6. . build/envsetup.sh
7. lunch omni_tolino_generic-userdebug
8. mka recoveryimage

if you want to enable A2 mode:

1. clone monochrome theme repo into <shrp_repo>/device/TOLINO/tolino_generic/theme
2. uncomment TW_IMX_EINK_MONOCHROME in BoardConfig.mk

if everything is successful you should find built recovery by path <twrp_repo>/out/target/product/tolino_generic/recovery.img