what happen i dont have speed

[Noeleth]

hi friends, im tryng to mining with gpu but i cant

i have all updated, only works with cmd or bat file, because if i run the exe dont run and put on the algo line auto, no kawpow.

edit with new images, i take the json file and put the trheads of kawpow from 256 to 64, and have the next results....in last image you can see the use of gpu 3 of 4 gb. its that posible? its really working??


.

[Spudz76]

Yes it's working with reduced intensity, but the 4295M difficulty from the pool jobs is way too high for you to ever get a result in time. That needs 143MH/s while you have 0.53646MH/s

Your correct job diff is more like 16M so find a pool that has autodiff that goes that low. I don't think Unmineable has forced diff on anything but their rx/0 pool, but you could try adding +16093800 onto the end of your user/wallet string since that's how it works if it works.

Otherwise use something like MoneroOcean which will take KawPow work (with full autodiff) and pay XMR.

[Noeleth]

Thanks, jajaja 0,5MH to the infinity. In this pool ill never do nothing. Changed the diff to +16093800 dont do nothing.

[Noeleth]

One more question, like you can see where profile say 1 thread and in the cuda say 256, is posible change and puts more threads in profile? So i know i can change threads in kawpow line but, in profile dont change nothing.

[Noeleth]

Yes it's working with reduced intensity, but the 4295M difficulty from the pool jobs is way too high for you to ever get a result in time. That needs 143MH/s while you have 0.53646MH/s

Your correct job diff is more like 16M so find a pool that has autodiff that goes that low. I don't think Unmineable has forced diff on anything but their rx/0 pool, but you could try adding +16093800 onto the end of your user/wallet string since that's how it works if it works.

Otherwise use something like MoneroOcean which will take KawPow work (with full autodiff) and pay XMR.

About the issue, i try to change pool for have autodiff but dont do nothing, i write to you because i can see you understand. Thesedays i have Being overclocking my GPU, so, having results, puting the coreclock at Max +135 and taking 1258 mhz, and memclock at +199 having 1200 mhz, because if i put 200 Or more the laptop crash and restart, send you the images where you can see at medium more or less the red message END OF FILE.

In the pool at this time start working to 14MH/S , having profits of course, then the grafic felt down to 2,3 and the ñame of worker dont have color like you can see, so i have this peaks when is end of file and xmrig start to work. But it hasnt continuous. Its posible do something to this works.

I dont no matters that it works at 14 mh/s. But isnt continuous. Thanks for all. And for your attention.

[Noeleth]

And today 1/04/22 a take this pic

how you can see i have peaks about 2-3 hours, so can i have the same Speed continuous during 24h? need change something at json?

[Spudz76]

You must switch pools, it's still 4295M difficulty and you will never get a smooth result stream.

There MUST be an accept every ~30 seconds.

[Noeleth]

Ok Thanks, one more question, is posible change the number of threads??? You can see at the picture 1, where puts USE PROFILE kawpow (1 thread)….

Is posible growup this ?

[Spudz76]

The actual threads are 64 as seen just below that in the GPU layout.

The one thread on the CPU is for shuttling data to the GPU and back only.

[wapik]

как вам удалось достичь столь высокой скорости ~500000 H/s работы? у меня всего 1018 H/s

[Spudz76]

Их скорость не совсем то, что показано на экране, неправильное измерение.