Troubles with espurna-1.9.4-itead-sonoff-basic.bin

[xoseperez]

Originally reported by: Christophe (Bitbucket: cmpi, GitHub: cmpi)

---

Hello,

espurna-1.9.1-itead-sonoff-basic.bin
and
espurna-1.9.2-itead-sonoff-basic.bin
work well on my two sonoff basic, but not
espurna-1.9.4-itead-sonoff-basic.bin

Impossible to connect to modules in AP mode

Best regards,

[xoseperez]

Hi
I'm not experiencing any connection issue with the testing sonoff basic I have. What is exactly the problem? Can you see anything strange in the debug log?

[xoseperez]

Original comment by Christophe (Bitbucket: cmpi, GitHub: cmpi):

---

Log version 1.9.2
Connects
Everything works fine

[xoseperez]

Original comment by Christophe (Bitbucket: cmpi, GitHub: cmpi):

---

Version 1.9.4
Fail to connect to the WiFi netword
Impossible to connect to the created AP

[xoseperez]

Original comment by Christophe (Bitbucket: cmpi, GitHub: cmpi):

---

Hi Xose,
How to get more useful information ?

[xoseperez]

Original comment by Daniel Silva (Bitbucket: dreamfalcon, GitHub: dreamfalcon):

---

Add some problems also after upgrading, the sonoff started the AP but was unable to connect.
After a few minutes start working again in STA mode.

[xoseperez]

Original comment by Daniel Silva (Bitbucket: dreamfalcon, GitHub: dreamfalcon):

---

And it continues giving problems, the webpage doesn't load and sometimes the MQTT commands have a small delay.

[xoseperez]

Original comment by Daniel Silva (Bitbucket: dreamfalcon, GitHub: dreamfalcon):

---

Can't even return to 1.9.2 using the OTA.
Is always giving "ERR_CONNECTION_RESET".

[xoseperez]

Original comment by Daniel Silva (Bitbucket: dreamfalcon, GitHub: dreamfalcon):

---

Meanwhile it just "died".
I had to flash the original SDK and the 1.9.2 version again.
Appears to be working.

[xoseperez]

Original comment by adorzjh (Bitbucket: adorzjh, GitHub: adorzjh):

---

I had the same problem.
Checkout of commit a46fbf8 solved the problem (pre JustWiFi 1.1.5).

[xoseperez]

Thanks for your reports.
Wll rollback that commit and release a new version ASAP.

[xoseperez]

Original comment by Vincèn PUJOL (Bitbucket: vincegre, GitHub: vincegre):

---

Just discovered Espurna and falshed one of my Sonoff basic to discover same issue as reported here :( On my cellphone I see the AP but unable to connect to it (once typed password for wifi phone tries to connect without success) and on my laptop I don't even see the Wifi SSID :(

Should I install previous version after a flash reset ? or wait for a very soon update that correct these issues ?

[xoseperez]

Original comment by Daniel Silva (Bitbucket: dreamfalcon, GitHub: dreamfalcon):

---

The AiLight was also giving some problems.
Back to 1.9.2 and its working great.
Not sure if the problem was the same.

@vincèn PUJOL the version 1.9.2 its working with no problems.

[xoseperez]

Original comment by Vincèn PUJOL (Bitbucket: vincegre, GitHub: vincegre):

---

Yep flashed the 1.9.2 and at least it starts but unable to do more than change admin pass :( Unable to save Wifi settings, completely lost by web interface....

[xoseperez]

Original comment by Daniel Silva (Bitbucket: dreamfalcon, GitHub: dreamfalcon):

---

You need to click on Update to save.

[xoseperez]

I have released 1.9.5 reverting the JustWifi change.

[xoseperez]

Original comment by Daniel Silva (Bitbucket: dreamfalcon, GitHub: dreamfalcon):

---

sonoff basic is working with 1.9.5, but AiLight no.

[xoseperez]

Original comment by Daniel Silva (Bitbucket: dreamfalcon, GitHub: dreamfalcon):

---

And the AiLight died while flashing 1.9.2.
Will have to solder again.

[xoseperez]

Mmm... that's weird. Most of the times it's a matter of time that it opens an AP connection, you can then flash the binary from the webUI.

[xoseperez]

Original comment by kvpdesperado (Bitbucket: kvpdesperado, GitHub: kvpdesperado):

---

My sonoff basic still makes trouble. The wifi connection is completely unstable and it is not possible to connect to the sonoff web interface.

[xoseperez]

Original comment by Daniel Silva (Bitbucket: dreamfalcon, GitHub: dreamfalcon):

---

With 1.9.4/5 only works fine during a few seconds after turning on the power. The first time was able to flash after a dozen tries, but this time something went wrong during the flash process.

[xoseperez]

Original comment by Christophe (Bitbucket: cmpi, GitHub: cmpi):

---

Same for me tried 1.9.5 then reverted to 1.9.2

[xoseperez]

Original comment by Peter Wollenberg (Bitbucket: Maestro74, GitHub: Unknown):

---

Would like to agree. I also changed from 1.9.5 again to 1.9.2. Version 1.9.2 seems to be most stable to run.

[xoseperez]

Original comment by thomasvt97 (Bitbucket: thomasvt97, GitHub: Unknown):

---

I'm running version 1.9.5 now, which runs stable as 1.9.7 has problems with connecting to WiFi. 1.9.2 also works fine.

Edit: After setting the settings to my liking and upgrading to 1.9.7 via the web interface it seems to work.