init.lua

-- Set <space> as the leader key
-- See `:help mapleader`
--  NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used)
vim.g.mapleader = ' '
vim.g.maplocalleader = ' '

-- Set to true if you have a Nerd Font installed
vim.g.have_nerd_font = true

-- [[ Setting options ]]

-- Make line numbers default
vim.opt.number = true
vim.opt.relativenumber = true

-- Enable mouse mode, can be useful for resizing splits for example!
vim.opt.mouse = 'a'

-- Don't show the mode, since it's already in the status line
vim.opt.showmode = false

-- Enable break indent
vim.opt.breakindent = true

-- Save undo history
vim.opt.undofile = true

-- Case-insensitive searching UNLESS \C or one or more capital letters in the search term
vim.opt.ignorecase = true
vim.opt.smartcase = true

-- Keep signcolumn on by default
vim.opt.signcolumn = 'yes'

-- Decrease update time
vim.opt.updatetime = 250

-- Decrease mapped sequence wait time
-- Displays which-key popup sooner
vim.opt.timeoutlen = 300

-- Configure how new splits should be opened
vim.opt.splitright = true
vim.opt.splitbelow = true

-- Sets how neovim will display certain whitespace characters in the editor.
vim.opt.list = true
vim.opt.listchars = { eol = '¶', tab = '→·', trail = '·', nbsp = '␣' }

-- Preview substitutions live, as you type!
vim.opt.inccommand = 'split'

-- Show which line your cursor is on
vim.opt.cursorline = true

-- Minimal number of screen lines to keep above and below the cursor.
vim.opt.scrolloff = 10

-- Set <EOL> to <CR> by default
vim.opt.fileformat = 'unix'

-- Allow the detection of <CR><LF> <EOL>
vim.opt.fileformats = { 'unix', 'dos' }

-- Add workdir to the search path
vim.opt.path:append '**'

-- Set PowerShell Core as the default shell
vim.cmd [[
let &shell = executable('pwsh') ? 'pwsh' : 'powershell'
let &shellcmdflag = '-NoLogo -ExecutionPolicy RemoteSigned -Command [Console]::InputEncoding=[Console]::OutputEncoding=[System.Text.UTF8Encoding]::new();$PSDefaultParameterValues[''Out-File:Encoding'']=''utf8'';Remove-Alias -Force -ErrorAction SilentlyContinue tee;'
let &shellredir = '2>&1 | %%{ "$_" } | Out-File %s; exit $LastExitCode'
let &shellpipe  = '2>&1 | %%{ "$_" } | tee %s; exit $LastExitCode'
set shellquote= shellxquote=
]]

-- [[ Basic Keymaps ]]

-- Set highlight on search, but clear on pressing <Esc> in normal mode
vim.opt.hlsearch = true
vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')

-- Diagnostic keymaps
vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous [D]iagnostic message' })
vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next [D]iagnostic message' })
vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' })
vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })

-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
-- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which
-- is not what someone will guess without a bit more experience.
vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })

-- Keybinds to make split navigation easier.
vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })

-- Builtin search tools
vim.keymap.set('n', '<C-b>', ':buffer ', { desc = 'Invoke the buffer search' })
vim.keymap.set('n', '<C-p>', ':find ', { desc = 'Invoke the file search' })

-- Avoid <C-v>, as it is the Paste hotkey in the Windows Terminal
vim.keymap.set('n', 'vv', '<C-v>', { desc = 'Enter the Visual Block mode' })

vim.keymap.set({ 'n', 'v' }, 'Y', '"*y', { desc = '[Y]ank into the OS clipboard' })

if vim.fn.executable 'lazygit' then
  vim.keymap.set('n', '<leader>gg', function()
    local bufnr = vim.fn.bufadd 'term://lazygit'
    vim.keymap.set('t', 'gt', '<C-\\><C-n>gt', { buffer = bufnr, silent = true, desc = 'Exit terminal mode and switch tabs' })
    vim.keymap.set('t', 'gT', '<C-\\><C-n>gT', { buffer = bufnr, silent = true, desc = 'Exit terminal mode and switch tabs' })
    vim.cmd('$tab sbuffer ' .. bufnr .. '|startinsert')
  end, { desc = 'Open `lazygit` in a new tab' })
end

-- [[ Abbreviations ]]

-- Open `:help` in a vertical split to the right by default
vim.cmd [[
cnoreabbrev help vertical botright help
]]

-- [[ Basic Autocommands ]]

-- Highlight when yanking (copying) text
vim.api.nvim_create_autocmd('TextYankPost', {
  desc = 'Highlight when yanking (copying) text',
  group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
  callback = function() vim.highlight.on_yank() end,
})

-- [[ Install `lazy.nvim` plugin manager ]]

local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
if not vim.loop.fs_stat(lazypath) then
  local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
  vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
end ---@diagnostic disable-next-line: undefined-field
vim.opt.rtp:prepend(lazypath)

-- [[ Lazy Keymaps ]]

vim.keymap.set('n', '<leader>pp', function() require('lazy').home() end, { desc = 'Plugins Status' })
vim.keymap.set('n', '<leader>pS', function() require('lazy').sync() end, { desc = 'Plugins Sync' })

-- [[ Configure and install plugins ]]

require('lazy').setup({
  'tpope/vim-sleuth', -- Detect tabstop and shiftwidth automatically

  -- NOTE: Use `opts = {}` to force a plugin to be loaded.

  { -- Adds git related signs to the gutter, as well as utilities for managing changes
    'lewis6991/gitsigns.nvim',
    opts = {
      signs = {
        add = { text = '+' },
        change = { text = '~' },
        delete = { text = '_' },
        topdelete = { text = '‾' },
        changedelete = { text = '~' },
      },
    },
    event = 'User VeryLazy',
    keys = {
      { '<leader>g', desc = '[G]it' },
      { ']g', function() require('gitsigns').next_hunk() end, desc = 'Next Git hunk' },
      { '[g', function() require('gitsigns').prev_hunk() end, desc = 'Previous Git hunk' },
      { '<leader>gl', function() require('gitsigns').blame_line() end, desc = 'View Git blame' },
      { '<leader>gL', function() require('gitsigns').blame_line { full = true } end, desc = 'View full Git blame' },
      { '<leader>gp', function() require('gitsigns').preview_hunk_inline() end, desc = 'Preview Git hunk inline' },
      { '<leader>gP', function() require('gitsigns').preview_hunk() end, desc = 'Preview Git hunk' },
      { '<leader>gh', function() require('gitsigns').reset_hunk() end, desc = 'Reset Git hunk' },
      { '<leader>gr', function() require('gitsigns').reset_buffer() end, desc = 'Reset Git buffer' },
      { '<leader>gs', function() require('gitsigns').stage_hunk() end, desc = 'Stage Git hunk' },
      { '<leader>gS', function() require('gitsigns').stage_buffer() end, desc = 'Stage Git buffer' },
      { '<leader>gu', function() require('gitsigns').undo_stage_hunk() end, desc = 'Unstage Git hunk' },
      { '<leader>gd', function() require('gitsigns').diffthis() end, desc = 'View Git diff' },
    },
  },

  { -- Useful plugin to show you pending keybinds.
    'folke/which-key.nvim',
    event = 'VimEnter', -- Sets the loading event to 'VimEnter'
    config = function() -- This is the function that runs, AFTER loading
      require('which-key').setup()

      -- Document existing key chains
      require('which-key').register {
        ['<leader>c'] = { name = '[C]ode', _ = 'which_key_ignore' },
        ['<leader>d'] = { name = '[D]ocument', _ = 'which_key_ignore' },
        ['<leader>p'] = { name = '[P]ackages', _ = 'which_key_ignore' },
        ['<leader>r'] = { name = '[R]ename', _ = 'which_key_ignore' },
        ['<leader>s'] = { name = '[S]earch', _ = 'which_key_ignore' },
        ['<leader>w'] = { name = '[W]orkspace', _ = 'which_key_ignore' },
      }
    end,
  },

  { -- Fuzzy Finder (files, lsp, etc)
    'nvim-telescope/telescope.nvim',
    event = 'VimEnter',
    branch = '0.1.x',
    dependencies = {
      'nvim-lua/plenary.nvim',
      { -- If encountering errors, see telescope-fzf-native README for installation instructions
        'nvim-telescope/telescope-fzf-native.nvim',
        build = 'cmake -S. -Bbuild -DCMAKE_BUILD_TYPE=Release && cmake --build build --config Release && cmake --install build --prefix build',
        ---@diagnostic disable-next-line: redundant-parameter
        cond = function(self) return #vim.fs.find('libfzf.dll', { path = self.dir .. '/build' }) > 0 or vim.fn.executable 'cmake' == 1 end,
      },
      { 'nvim-telescope/telescope-ui-select.nvim' },

      -- Useful for getting pretty icons, but requires a Nerd Font.
      { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font },
    },
    config = function()
      -- Telescope is a fuzzy finder that comes with a lot of different things that
      -- it can fuzzy find! It's more than just a "file finder", it can search
      -- many different aspects of Neovim, your workspace, LSP, and more!
      --
      -- The easiest way to use Telescope, is to start by doing something like:
      --  :Telescope help_tags
      --
      -- After running this command, a window will open up and you're able to
      -- type in the prompt window. You'll see a list of `help_tags` options and
      -- a corresponding preview of the help.
      --
      -- Two important keymaps to use while in Telescope are:
      --  - Insert mode: <c-/>
      --  - Normal mode: ?
      --
      -- This opens a window that shows you all of the keymaps for the current
      -- Telescope picker. This is really useful to discover what Telescope can
      -- do as well as how to actually do it!

      -- [[ Configure Telescope ]]
      -- See `:help telescope` and `:help telescope.setup()`
      require('telescope').setup {
        -- You can put your default mappings / updates / etc. in here
        --  All the info you're looking for is in `:help telescope.setup()`
        --
        -- defaults = {
        --   mappings = {
        --     i = { ['<c-enter>'] = 'to_fuzzy_refine' },
        --   },
        -- },
        -- pickers = {}
        extensions = {
          ['ui-select'] = {
            require('telescope.themes').get_dropdown(),
          },
        },
      }

      -- Enable Telescope extensions if they are installed
      pcall(require('telescope').load_extension, 'fzf')
      pcall(require('telescope').load_extension, 'ui-select')

      -- See `:help telescope.builtin`
      local builtin = require 'telescope.builtin'
      vim.keymap.set('n', '<leader>sh', builtin.help_tags, { desc = '[S]earch [H]elp' })
      vim.keymap.set('n', '<leader>sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' })
      vim.keymap.set('n', '<leader>sf', builtin.find_files, { desc = '[S]earch [F]iles' })
      vim.keymap.set('n', '<leader>ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' })
      vim.keymap.set('n', '<leader>sw', builtin.grep_string, { desc = '[S]earch current [W]ord' })
      vim.keymap.set('n', '<leader>sg', builtin.live_grep, { desc = '[S]earch by [G]rep' })
      vim.keymap.set('n', '<leader>sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' })
      vim.keymap.set('n', '<leader>sr', builtin.resume, { desc = '[S]earch [R]esume' })
      vim.keymap.set('n', '<leader>s.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' })
      vim.keymap.set('n', '<leader><leader>', builtin.buffers, { desc = '[ ] Find existing buffers' })

      -- Slightly advanced example of overriding default behavior and theme
      vim.keymap.set('n', '<leader>/', function()
        -- You can pass additional configuration to Telescope to change the theme, layout, etc.
        builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown {
          winblend = 10,
          previewer = false,
        })
      end, { desc = '[/] Fuzzily search in current buffer' })

      -- It's also possible to pass additional configuration options.
      --  See `:help telescope.builtin.live_grep()` for information about particular keys
      vim.keymap.set(
        'n',
        '<leader>s/',
        function()
          builtin.live_grep {
            grep_open_files = true,
            prompt_title = 'Live Grep in Open Files',
          }
        end,
        { desc = '[S]earch [/] in Open Files' }
      )

      -- Shortcut for searching your Neovim configuration files
      vim.keymap.set('n', '<leader>sn', function() builtin.find_files { cwd = vim.fn.stdpath 'config' } end, { desc = '[S]earch [N]eovim files' })
    end,
  },

  { -- LSP Configuration & Plugins
    'neovim/nvim-lspconfig',
    dependencies = {
      -- Automatically install LSPs and related tools to stdpath for Neovim
      'williamboman/mason.nvim',
      'williamboman/mason-lspconfig.nvim',
      'WhoIsSethDaniel/mason-tool-installer.nvim',

      -- Useful status updates for LSP.
      { 'j-hui/fidget.nvim', opts = {} },

      -- `neodev` configures Lua LSP for your Neovim config, runtime and plugins
      -- used for completion, annotations and signatures of Neovim apis
      { 'folke/neodev.nvim', opts = {} },
    },
    config = function()
      --  This function gets run when an LSP attaches to a particular buffer.
      --    That is to say, every time a new file is opened that is associated with
      --    an lsp (for example, opening `main.rs` is associated with `rust_analyzer`) this
      --    function will be executed to configure the current buffer
      vim.api.nvim_create_autocmd('LspAttach', {
        group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }),
        callback = function(event)
          local map = function(keys, func, desc) vim.keymap.set('n', keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc }) end

          -- Jump to the definition of the word under your cursor.
          --  This is where a variable was first declared, or where a function is defined, etc.
          --  To jump back, press <C-t>.
          map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
          map('<C-]>', vim.lsp.buf.definition, '[G]oto [D]efinition')

          -- Find references for the word under your cursor.
          map('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')

          -- Jump to the implementation of the word under your cursor.
          --  Useful when your language has ways of declaring types without an actual implementation.
          map('gI', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')

          -- Jump to the type of the word under your cursor.
          --  Useful when you're not sure what type a variable is and you want to see
          --  the definition of its *type*, not where it was *defined*.
          map('<leader>D', require('telescope.builtin').lsp_type_definitions, 'Type [D]efinition')

          -- Fuzzy find all the symbols in your current document.
          --  Symbols are things like variables, functions, types, etc.
          map('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols')

          -- Fuzzy find all the symbols in your current workspace.
          --  Similar to document symbols, except searches over your entire project.
          map('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols')

          -- Rename the variable under your cursor.
          --  Most Language Servers support renaming across files, etc.
          map('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')

          -- Execute a code action, usually your cursor needs to be on top of an error
          -- or a suggestion from your LSP for this to activate.
          map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction')

          -- Opens a popup that displays documentation about the word under your cursor
          --  See `:help K` for why this keymap.
          map('K', vim.lsp.buf.hover, 'Hover Documentation')
          map('gh', vim.lsp.buf.hover, '[H]over Documentation')

          -- Opens a popup that displays diagnostic messages about the line under your cursor
          map('gl', function()
            vim.diagnostic.open_float {
              format = function(diagnostic) return string.format('%s: %s', diagnostic.code, diagnostic.message) end,
            }
          end, 'Hover Diagnostics')

          -- WARN: This is not Goto Definition, this is Goto Declaration.
          --  For example, in C this would take you to the header.
          map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')

          map('<Leader>lll', vim.diagnostic.setloclist, 'Add buffer Diagnostics to the [L]ocation [L]ist')
          map('<Leader>llq', vim.diagnostic.setqflist, 'Add all Diagnostics to the [Q]uickfix [L]ist')

          vim.keymap.set('i', '<C-g>', vim.lsp.buf.signature_help, { buffer = event.buf, desc = 'LSP: Show Signature Help' })

          -- The following two autocommands are used to highlight references of the
          -- word under your cursor when your cursor rests there for a little while.
          --    See `:help CursorHold` for information about when this is executed
          --
          -- When you move your cursor, the highlights will be cleared (the second autocommand).
          local client = vim.lsp.get_client_by_id(event.data.client_id)
          if client and client.server_capabilities.documentHighlightProvider then
            vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
              buffer = event.buf,
              callback = vim.lsp.buf.document_highlight,
            })

            vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, {
              buffer = event.buf,
              callback = vim.lsp.buf.clear_references,
            })
          end
        end,
      })

      -- LSP servers and clients are able to communicate to each other what features they support.
      --  By default, Neovim doesn't support everything that is in the LSP specification.
      --  When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities.
      --  So, we create new capabilities with nvim cmp, and then broadcast that to the servers.
      local capabilities = vim.lsp.protocol.make_client_capabilities()
      capabilities = vim.tbl_deep_extend('force', capabilities, require('cmp_nvim_lsp').default_capabilities())

      -- Enable the following language servers
      --  Feel free to add/remove any LSPs that you want here. They will automatically be installed.
      --
      --  Add any additional override configuration in the following tables. Available keys are:
      --  - cmd (table): Override the default command used to start the server
      --  - filetypes (table): Override the default list of associated filetypes for the server
      --  - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features.
      --  - settings (table): Override the default settings passed when initializing the server.
      --        For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
      local servers = {
        -- clangd = {},
        -- gopls = {},
        -- pyright = {},
        -- rust_analyzer = {},
        -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
        --
        -- Some languages (like typescript) have entire language plugins that can be useful:
        --    https://github.com/pmizio/typescript-tools.nvim
        --
        -- But for many setups, the LSP (`tsserver`) will work just fine
        -- tsserver = {},
        --

        lua_ls = {
          -- cmd = {...},
          -- filetypes = { ...},
          -- capabilities = {},
          settings = {
            Lua = {
              completion = {
                callSnippet = 'Replace',
              },
              -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings
              -- diagnostics = { disable = { 'missing-fields' } },
            },
          },
        },
        prettierd = {},
        stylua = {}, -- Used to format Lua code
        yamlls = {
          settings = {
            yaml = {
              schemas = {
                ['https://raw.githubusercontent.com/SigmaHQ/sigma-specification/main/sigma-schema.json'] = '*/sigma/**/*.yaml',
              },
            },
          },
        },
      }

      -- Ensure the servers and tools above are installed
      --  To check the current status of installed tools and/or manually install
      --  other tools, you can run
      --    :Mason
      --
      --  You can press `g?` for help in this menu.
      local path = require 'mason-core.path'
      require('mason').setup { install_root_dir = path.concat { os.getenv 'USERPROFILE', 'Tools', 'mason' } }

      -- You can add other tools here that you want Mason to install
      -- for you, so that they are available from within Neovim.
      local ensure_installed = vim.tbl_keys(servers or {})
      require('mason-tool-installer').setup { ensure_installed = ensure_installed }

      require('mason-lspconfig').setup {
        handlers = {
          function(server_name)
            local server = servers[server_name] or {}
            -- This handles overriding only values explicitly passed
            -- by the server configuration above. Useful when disabling
            -- certain features of an LSP (for example, turning off formatting for tsserver)
            server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {})
            require('lspconfig')[server_name].setup(server)
          end,
        },
      }
    end,
  },

  { -- Autoformat
    'stevearc/conform.nvim',
    opts = {
      notify_on_error = false,
      format_on_save = function(bufnr)
        -- Disable "format_on_save lsp_fallback" for languages that don't
        -- have a well standardized coding style. You can add additional
        -- languages here or re-enable it for the disabled ones.
        local disable_filetypes = { c = true, cpp = true }
        return {
          timeout_ms = 500,
          lsp_fallback = not disable_filetypes[vim.bo[bufnr].filetype],
        }
      end,
      formatters_by_ft = {
        lua = { 'stylua' },
        -- Conform can also run multiple formatters sequentially
        python = { 'isort', 'black' },
        --
        -- You can use a sub-list to tell conform to run *until* a formatter
        -- is found.
        -- javascript = { { "prettierd", "prettier" } },
        yaml = { { 'prettierd', 'prettier' } },
      },
    },
  },

  { -- Autocompletion
    'hrsh7th/nvim-cmp',
    event = 'InsertEnter',
    dependencies = {
      -- Snippet Engine & its associated nvim-cmp source
      {
        'L3MON4D3/LuaSnip',
        build = (function()
          -- Build Step is needed for regex support in snippets.
          -- This step is not supported in many windows environments.
          -- Remove the below condition to re-enable on windows.
          if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then return end
          return 'make install_jsregexp'
        end)(),
        dependencies = {
          -- `friendly-snippets` contains a variety of premade snippets.
          --    See the README about individual language/framework/plugin snippets:
          --    https://github.com/rafamadriz/friendly-snippets
          {
            'rafamadriz/friendly-snippets',
            config = function() require('luasnip.loaders.from_vscode').lazy_load() end,
          },
        },
      },
      'saadparwaiz1/cmp_luasnip',

      -- Adds other completion capabilities.
      --  nvim-cmp does not ship with all sources by default. They are split
      --  into multiple repos for maintenance purposes.
      'hrsh7th/cmp-nvim-lsp',
      'hrsh7th/cmp-path',
    },
    config = function()
      -- See `:help cmp`
      local cmp = require 'cmp'
      local luasnip = require 'luasnip'
      luasnip.config.setup {}

      cmp.setup {
        snippet = {
          expand = function(args) luasnip.lsp_expand(args.body) end,
        },
        completion = { completeopt = 'menu,menuone,noinsert' },

        -- For an understanding of why these mappings were
        -- chosen, you will need to read `:help ins-completion`
        --
        -- No, but seriously. Please read `:help ins-completion`, it is really good!
        mapping = cmp.mapping.preset.insert {
          -- Select the [n]ext item
          ['<C-n>'] = cmp.mapping.select_next_item(),
          -- Select the [p]revious item
          ['<C-p>'] = cmp.mapping.select_prev_item(),

          -- Scroll the documentation window [b]ack / [f]orward
          ['<C-b>'] = cmp.mapping.scroll_docs(-4),
          ['<C-f>'] = cmp.mapping.scroll_docs(4),

          -- Accept ([y]es) the completion.
          --  This will auto-import if your LSP supports it.
          --  This will expand snippets if the LSP sent a snippet.
          ['<C-y>'] = cmp.mapping.confirm { select = true },

          -- Manually trigger a completion from nvim-cmp.
          --  Generally you don't need this, because nvim-cmp will display
          --  completions whenever it has completion options available.
          ['<C-Space>'] = cmp.mapping.complete {},

          -- Think of <c-l> as moving to the right of your snippet expansion.
          --  So if you have a snippet that's like:
          --  function $name($args)
          --    $body
          --  end
          --
          -- <c-l> will move you to the right of each of the expansion locations.
          -- <c-h> is similar, except moving you backwards.
          ['<C-l>'] = cmp.mapping(function()
            if luasnip.expand_or_locally_jumpable() then luasnip.expand_or_jump() end
          end, { 'i', 's' }),
          ['<C-h>'] = cmp.mapping(function()
            if luasnip.locally_jumpable(-1) then luasnip.jump(-1) end
          end, { 'i', 's' }),

          -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see:
          --    https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
        },
        sources = {
          { name = 'nvim_lsp' },
          { name = 'luasnip' },
          { name = 'path' },
        },
      }
    end,
  },

  { 'folke/tokyonight.nvim' },

  { -- Colorscheme
    'AlexvZyl/nordic.nvim',
    priority = 1000,
    init = function(_) vim.cmd.colorscheme 'nordic' end,
  },

  -- Highlight todo, notes, etc in comments
  { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } },

  { -- Collection of various small independent plugins/modules
    'echasnovski/mini.nvim',
    config = function()
      -- Better Around/Inside textobjects
      --
      -- Examples:
      --  - va)  - [V]isually select [A]round [)]paren
      --  - yinq - [Y]ank [I]nside [N]ext [']quote
      --  - ci'  - [C]hange [I]nside [']quote
      require('mini.ai').setup { n_lines = 500 }

      -- Add/delete/replace surroundings (brackets, quotes, etc.)
      --
      -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren
      -- - sd'   - [S]urround [D]elete [']quotes
      -- - sr)'  - [S]urround [R]eplace [)] [']
      require('mini.surround').setup()

      -- Simple and easy statusline.
      --  You could remove this setup call if you don't like it,
      --  and try some other statusline plugin
      local statusline = require 'mini.statusline'
      -- set use_icons to true if you have a Nerd Font
      statusline.setup { use_icons = vim.g.have_nerd_font }

      -- You can configure sections in the statusline by overriding their
      -- default behavior. For example, here we set the section for
      -- cursor location to LINE:COLUMN
      ---@diagnostic disable-next-line: duplicate-set-field
      statusline.section_location = function() return '%2l:%-2v' end

      -- ... and there is more!
      --  Check out: https://github.com/echasnovski/mini.nvim
      require('mini.files').setup {
        mappings = {
          go_in = '',
          go_in_plus = '',
          go_out = '',
          go_out_plus = 'h',
          reset = '',
          synchronize = 'R',
        },
      }
      vim.keymap.set('n', '-', function()
        require('mini.files').open(vim.api.nvim_buf_get_name(0))
        require('mini.files').reveal_cwd()
      end)
      vim.api.nvim_create_autocmd('User', {
        group = vim.api.nvim_create_augroup('kickstart-mini-files', { clear = true }),
        pattern = 'MiniFilesBufferCreate',
        callback = function(event)
          local map = function(keys, func) vim.keymap.set('n', keys, func, { buffer = event.data.buf_id }) end
          map('l', function() require('mini.files').go_in { close_on_file = true } end)
          map('<cr>', function() require('mini.files').go_in { close_on_file = true } end)
          map('r', function()
            require('mini.files').reset()
            require('mini.files').reveal_cwd()
          end)
        end,
      })
    end,
  },
  { -- Highlight, edit, and navigate code
    'nvim-treesitter/nvim-treesitter',
    build = ':TSUpdate',
    opts = {
      ensure_installed = { 'bash', 'c', 'html', 'lua', 'markdown', 'vim', 'vimdoc' },
      highlight = {
        enable = true,
        -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules.
        --  If you are experiencing weird indenting issues, add the language to
        --  the list of additional_vim_regex_highlighting and disabled languages for indent.
        additional_vim_regex_highlighting = { 'ruby' },
      },
      indent = { enable = true, disable = { 'ruby' } },
    },
    config = function(_, opts)
      -- [[ Configure Treesitter ]] See `:help nvim-treesitter`

      ---@diagnostic disable-next-line: missing-fields
      require('nvim-treesitter.configs').setup(opts)

      -- There are additional nvim-treesitter modules that you can use to interact
      -- with nvim-treesitter. You should go explore a few and see what interests you:
      --
      --    - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod`
      --    - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
      --    - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
    end,
  },

  -- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the
  -- init.lua. If you want these files, they are in the repository, so you can just download them and
  -- place them in the correct locations.

  -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for Kickstart
  --
  --  Here are some example plugins that I've included in the Kickstart repository.
  --  Uncomment any of the lines below to enable them (you will need to restart nvim).
  --
  -- require 'kickstart.plugins.debug',
  -- require 'kickstart.plugins.indent_line',
  -- require 'kickstart.plugins.lint',

  -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
  --    This is the easiest way to modularize your config.
  --
  --  Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
  --    For additional information, see `:help lazy.nvim-lazy.nvim-structuring-your-plugins`
  -- { import = 'custom.plugins' },
}, {
  install = { missing = false },
  ui = {
    -- If you are using a Nerd Font: set icons to an empty table which will use the
    -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table
    icons = vim.g.have_nerd_font and {} or {
      cmd = '⌘',
      config = '🛠',
      event = '📅',
      ft = '📂',
      init = '⚙',
      keys = '🗝',
      plugin = '🔌',
      runtime = '💻',
      require = '🌙',
      source = '📄',
      start = '🚀',
      task = '📌',
      lazy = '💤 ',
    },
  },
})

-- [[ Tools ]]

-- `ripgrep`
if vim.fn.executable 'rg' then
  vim.opt.grepformat:append '%f:%l:%c:%m'
  vim.opt.grepprg = 'rg --hidden --no-heading --smart-case --vimgrep'
end

-- The line beneath this is called `modeline`. See `:help modeline`
-- vim: ts=2 sts=2 sw=2 et