Support for ESP 3.0 core

• Support for ESP 3.0 by akellai.
• restartTimer() now uses variable sMicrosAtLastStopTimer to keep track of uncounted ticks between stopTimer() and restartTimer().
• Removed functions addTicksToInternalTickCounter() and addMicrosToInternalTickCounter(), which were added in 4.1.0.
• Version 2.2.0 of TinyIR with new TinyReceiverDecode() function to be used as drop in for IrReceiver.decode().
• Support of RC6A.

Using 8 bit raw timing buffer for all timings except frame gap (former rawbuf[0]).

• Using 8 bit raw timing buffer for all timings except frame gap (former rawbuf[0]).
• Renamed decodedIRData.initialGap to decodedIRData.initialGapTicks.
• sendNEC() and sendNEC2() now accepts 16 bit command to better map to NECext protocol found in IRDB databases.
• ir_DistanceWidthProtocol() now decodes up to 10 ms mark or spaces if RAM is bigger than 2 k.
• Improved sensitivity and decoding of PULSE_DISTANCE + PULSE_WIDTH protocols.
• Changed TOLERANCE_FOR_DECODERS_MARK_OR_SPACE_MATCHING to TOLERANCE_FOR_DECODERS_MARK_OR_SPACE_MATCHING_PERCENT.
• Improved examples AllProtocolsOnLCD, UnitTest and SimpleReceiver.
• New functions decodePulseDistanceWidthData() with 6 parameters and decodePulseDistanceWidthDataStrict() with 7 parameters.

Added ESP32 core 3.x error message

• Added sendSonyMSB(unsigned long data, int nbits) as a clone of sendSony(unsigned long data, int nbits) to be more consistent.
• Added sendSamsungMSB(unsigned long data, int nbits) as a clone of sendSAMSUNG(unsigned long data, int nbits) to be more consistent.
• Added ESP32 core 3.x error message.

Fixed overflow bug for rawlen > 254

• Fixed overflow bug for rawlen > 254.
• Removed deprecated sendPulseDistance... functions with parameter aSendStopBit.

Removed default value USE_DEFAULT_FEEDBACK_LED_PIN for last parameter of IRsend::begin(...)

• Removed default value USE_DEFAULT_FEEDBACK_LED_PIN for last parameter of IRsend::begin(bool aEnableLEDFeedback, uint_fast8_t aFeedbackLEDPin).
  Therefore IrSender.begin(DISABLE_LED_FEEDBACK) will not longer work!
• Added convenience function isIRReceiverAttachedForTinyReceiver().
• Added Extended NEC Protocol macro to TinyIR by Buzzerb.
• Fixed sendSamsung() / sendSamsungLG() bug.
• Added functions stopTimer(), restartTimer() and restartTimerWithTicksToAdd().
• Added rawlen and initialGap to IRData.
• Added ReceiveAndSendHobToHood example.
• Changed RECORD_GAP_MICROS default value from 5000 to 8000.

Fixes and TinyReceiver 2.0

• Fix wrong type of tEnableLEDFeedback in IRSend.hpp and IRReceive.hpp.
• TinyReceiver 2.0
  • New TinyIRReceiverData which is filled with address, command and flags.
  • Removed parameters address, command and flags from callback handleReceivedTinyIRData() and printTinyReceiverResultMinimal().
  • Callback function now only enabled if USE_CALLBACK_FOR_TINY_RECEIVER is activated.
• Fix changing IR_SEND_PIN dynamically for ESP32.
• Fix wrong type of tEnableLEDFeedback.
• Support for ESP32-C3.

Old decode() prints a message now. Added untested Uno R4 support.

• The old decode function is renamed to decode_old(decode_results *aResults). decode (decode_results *aResults) is only available in IRremote.h and prints a message.
• Added DECODE_ONKYO, to force 16 bit command and data decoding.
• Enable Bang&Olufsen 455 kHz if SEND_PWM_BY_TIMER is defined.
• Fixed bug: TinyReceiver throwing ISR not in IRAM on ESP8266.
• Usage of ATTinyCore pin numbering scheme e.g. PIN_PB2.
• Added ARDUINO_ARCH_NRF52 to support Seeed XIAO nRF52840 Sense.
• First untested support of Uno R4.
• Extraced version macros to IRVersion.h.

Workaround for ESP32 RTOS delay() timing bug influencing the mark() function.

v4.1.2

V4.1.2. Workaround for ESP32 RTOS delay() timing bug influencing the …

Disabled #define LOCAL_DEBUG in IRReceive.hpp, which was accidently enabled at 4.1.0

• SAMD51 use timer3 if timer5 not available.
• Disabled #define LOCAL_DEBUG in IRReceive.hpp, which was accidently enabled at 4.1.0.

Added FAST Protocol. Changed some function signatures. Improved handling of PULSE_DISTANCE + PULSE_WIDTH protocols.

• Fixed bug in printing durations > 64535 in printIRResultRawFormatted().
• Narrowed constraints for RC5 RC6 number of bits.
• Changed the first parameter of printTinyReceiverResultMinimal() to &Serial.
• Removed 3 Serial prints for deprecation warnings to fix #1094.
• Version 1.2.0 of TinyIR. Now FAST protocol with 40 ms period and shorter header space.
• Removed field bool hasStopBit and parameter bool aSendStopBit from PulseDistanceWidthProtocolConstants structure and related functions.
• Changed a lot of unsigned int types to uint16_t types.
• Improved overflow handling.
• Improved software PWM generation.
• Added FAST protocol.
• Improved handling of PULSE_DISTANCE + PULSE_WIDTH protocols.
• New example ReceiveAndSendDistanceWidth.
• Removed the automatic restarting of the receiver timer after sending with SEND_PWM_BY_TIMER enabled.
• Split ISR into ISR and function IRPinChangeInterruptHandler().
• Added functions addTicksToInternalTickCounter() and addMicrosToInternalTickCounter().