From 77805a10d6c8a5690b22e9a6e202eb37668bc3d9 Mon Sep 17 00:00:00 2001 From: Zack Roadhouse Date: Tue, 21 Apr 2020 20:20:20 -0500 Subject: [PATCH] Ender 3 Turbo = Ender 3 Pro + BTT SKR v1.4 Turbo + TMC2208 + BLTouch v1.2 --- Marlin/Configuration.h | 48 +++++++++++++++++++------------------- Marlin/Configuration_adv.h | 44 +++++++++++++++++----------------- platformio.ini | 2 +- 3 files changed, 47 insertions(+), 47 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index c3aa62e9e302..07fedea36f85 100755 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -71,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(zroadhouse, Ender-3-Turbo)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -110,7 +110,7 @@ * Select a secondary serial port on the board to use for communication with the host. * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * This setting determines the communication speed of the printer. @@ -128,11 +128,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MELZI_CREALITY + #define MOTHERBOARD BOARD_BTT_SKR_V1_4_TURBO #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Ender-3" +#define CUSTOM_MACHINE_NAME "Ender-3-Turbo" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like http://www.uuidgenerator.net/version4 @@ -674,15 +674,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208 +#define Y_DRIVER_TYPE TMC2208 +#define Z_DRIVER_TYPE TMC2208 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -816,7 +816,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -832,10 +832,10 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -891,7 +891,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -963,14 +963,14 @@ * * Specify a Probe position as { X, Y, Z } */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -44, -5, -2.9 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 +#define MIN_PROBE_EDGE 20 // X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 +#define XY_PROBE_SPEED 10000 // Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z @@ -1058,7 +1058,7 @@ // @section extruder #define DISABLE_E false // For all extruders -//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine @@ -1212,14 +1212,14 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable * this option to have G28 restore the prior leveling state. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 /** * Enable detailed logging of G28, G29, M48, etc. @@ -1243,7 +1243,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. @@ -1291,7 +1291,7 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 15 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle @@ -1362,7 +1362,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). @@ -1370,8 +1370,8 @@ #endif // Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) -#define HOMING_FEEDRATE_Z (4*60) +#define HOMING_FEEDRATE_XY (40*60) +#define HOMING_FEEDRATE_Z (8*60) // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1500,7 +1500,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index e8be7934c435..a109fed5cfd6 100755 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -429,7 +429,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN P2_04 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -638,7 +638,7 @@ // Safety: The probe needs time to recognize the command. // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 + #define BLTOUCH_DELAY 200 /** * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: @@ -664,7 +664,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - #define BLTOUCH_SET_5V_MODE + //#define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -1507,26 +1507,26 @@ //#define BABYSTEP_WITHOUT_HOMING //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 + #define BABYSTEP_MULTIPLICATOR_Z 2 // Babysteps are very small. Increase for faster motion. + #define BABYSTEP_MULTIPLICATOR_XY 2 #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. #endif #endif - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 + #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor + #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif @@ -1799,7 +1799,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -1831,7 +1831,7 @@ * Note that M207 / M208 / M209 settings are saved to EEPROM. * */ -//#define FWRETRACT +#define FWRETRACT #if ENABLED(FWRETRACT) #define FWRETRACT_AUTORETRACT // Override slicer retractions #if ENABLED(FWRETRACT_AUTORETRACT) @@ -1931,7 +1931,7 @@ * Requires NOZZLE_PARK_FEATURE. * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -1969,7 +1969,7 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. @@ -2108,7 +2108,7 @@ #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 #if AXIS_IS_TMC(X) - #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 760 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2124,7 +2124,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 580 + #define Y_CURRENT 760 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2140,7 +2140,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 580 + #define Z_CURRENT 760 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2172,7 +2172,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 650 + #define E0_CURRENT 900 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2330,7 +2330,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] @@ -2345,7 +2345,7 @@ * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. * M913 X/Y/Z/E to live tune the setting */ - //#define HYBRID_THRESHOLD + #define HYBRID_THRESHOLD #define X_HYBRID_THRESHOLD 100 // [mm/s] #define X2_HYBRID_THRESHOLD 100 @@ -2403,13 +2403,13 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continous reporting. */ - //#define TMC_DEBUG + #define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions. @@ -3047,7 +3047,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS +#define CANCEL_OBJECTS /** * I2C position encoders for closed loop control. diff --git a/platformio.ini b/platformio.ini index 9a6dbad1f1ec..399570fb8593 100644 --- a/platformio.ini +++ b/platformio.ini @@ -18,7 +18,7 @@ [platformio] src_dir = Marlin boards_dir = buildroot/share/PlatformIO/boards -default_envs = mega2560 +default_envs = LPC1769 [common] default_src_filter = + - - +