STM32F1: add MCU_STM32F103xG support

targets/TARGET_STM/PeripheralPins.h

@@ -52,6 +52,11 @@
 #define AFIO_REMAP_TIM2_PARTIAL_1 14
 #define AFIO_REMAP_TIM2_PARTIAL_2 15
 #define AFIO_REMAP_TIM4_ENABLE    16
+#define AFIO_REMAP_TIM9_ENABLE    17
+#define AFIO_REMAP_TIM10_ENABLE   18
+#define AFIO_REMAP_TIM11_ENABLE   19
+#define AFIO_REMAP_TIM13_ENABLE   20
+#define AFIO_REMAP_TIM14_ENABLE   21
 #endif
 
 

targets/TARGET_STM/TARGET_STM32F1/CMakeLists.txt

@@ -6,6 +6,7 @@ add_subdirectory(TARGET_STM32F103xB EXCLUDE_FROM_ALL)
 add_subdirectory(TARGET_STM32F103xC EXCLUDE_FROM_ALL)
 add_subdirectory(TARGET_STM32F103xD EXCLUDE_FROM_ALL)
 add_subdirectory(TARGET_STM32F103xE EXCLUDE_FROM_ALL)
+add_subdirectory(TARGET_STM32F103xG EXCLUDE_FROM_ALL)
 add_subdirectory(STM32Cube_FW EXCLUDE_FROM_ALL)
 
 add_library(mbed-stm32f1 INTERFACE)

targets/TARGET_STM/TARGET_STM32F1/TARGET_STM32F103xG/CMakeLists.txt

@@ -0,0 +1,26 @@
+# Copyright (c) 2020 ARM Limited. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+
+if(${MBED_TOOLCHAIN} STREQUAL "GCC_ARM")
+    set(STARTUP_FILE TOOLCHAIN_GCC_ARM/startup_stm32f103xg.S)
+    set(LINKER_FILE TOOLCHAIN_GCC_ARM/stm32f103xg.ld)
+elseif(${MBED_TOOLCHAIN} STREQUAL "ARM")
+    set(STARTUP_FILE TOOLCHAIN_ARM/startup_stm32f103xg.S)
+    set(LINKER_FILE TOOLCHAIN_ARM/stm32f103xg.sct)
+endif()
+
+add_library(mbed-stm32f103xg INTERFACE)
+
+target_include_directories(mbed-stm32f103xg
+    INTERFACE
+        .
+)
+
+target_sources(mbed-stm32f103xg
+    INTERFACE
+        ${STARTUP_FILE}
+)
+
+mbed_set_linker_script(mbed-stm32f103xg ${CMAKE_CURRENT_SOURCE_DIR}/${LINKER_FILE})
+
+target_link_libraries(mbed-stm32f103xg INTERFACE mbed-stm32f1)

targets/TARGET_STM/TARGET_STM32F1/TARGET_STM32F103xG/PeripheralNames.h

@@ -0,0 +1,98 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    ADC_1 = (int)ADC1_BASE,
+    ADC_2 = (int)ADC2_BASE,
+    ADC_3 = (int)ADC3_BASE
+} ADCName;
+
+typedef enum {
+    DAC_1 = (int)DAC_BASE
+} DACName;
+
+typedef enum {
+    UART_1 = (int)USART1_BASE,
+    UART_2 = (int)USART2_BASE,
+    UART_3 = (int)USART3_BASE,
+    UART_4 = (int)UART4_BASE,
+    UART_5 = (int)UART5_BASE
+} UARTName;
+
+#define DEVICE_SPI_COUNT 3
+typedef enum {
+    SPI_1 = (int)SPI1_BASE,
+    SPI_2 = (int)SPI2_BASE,
+    SPI_3 = (int)SPI3_BASE
+} SPIName;
+
+typedef enum {
+    I2C_1 = (int)I2C1_BASE,
+    I2C_2 = (int)I2C2_BASE
+} I2CName;
+
+typedef enum {
+    PWM_1  = (int)TIM1_BASE,
+    PWM_2  = (int)TIM2_BASE,
+    PWM_3  = (int)TIM3_BASE,
+    PWM_4  = (int)TIM4_BASE,
+    PWM_5  = (int)TIM5_BASE,
+    PWM_6  = (int)TIM6_BASE,
+    PWM_7  = (int)TIM7_BASE,
+    PWM_8  = (int)TIM8_BASE,
+    PWM_9  = (int)TIM9_BASE,
+    PWM_10  = (int)TIM10_BASE,
+    PWM_11  = (int)TIM11_BASE,
+    PWM_12  = (int)TIM12_BASE,
+    PWM_13  = (int)TIM13_BASE,
+    PWM_14  = (int)TIM14_BASE,
+} PWMName;
+
+typedef enum {
+    CAN_1 = (int)CAN1_BASE
+} CANName;
+
+typedef enum {
+    USB_FS = (int)USB_BASE
+} USBName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif