Mesh api: Added PHY mode, channel plan IDs and configuration functions

connectivity/nanostack/mbed-mesh-api/mbed-mesh-api/WisunInterface.h

@@ -157,6 +157,48 @@ class WisunInterface final : public MeshInterfaceNanostack {
      * */
     mesh_error_t validate_network_regulatory_domain(uint8_t regulatory_domain, uint8_t operating_class, uint8_t operating_mode);
 
+    /**
+     * \brief Set Wi-SUN network regulatory domain, PHY mode ID and channel plan ID.
+     *
+     * Function stores new parameters to mbed-mesh-api and uses them when connect() is called next time.
+     * If device is already connected to the Wi-SUN network then device will restart network discovery after
+     * changing the regulatory_domain, phy_mode_id or channel_plan_id.
+     *
+     * \param regulatory_domain Values defined in Wi-SUN PHY-specification. Use 0 to leave parameter unchanged or 0xff to use default value.
+     * \param phy_mode_id Values defined in Wi-SUN PHY-specification. Use 0 to leave parameter unchanged or 0xff to use default value.
+     * \param channel_plan_id Values defined in Wi-SUN PHY-specification. Use 0 to leave parameter unchanged or 0xff to use default value.
+     * \return MESH_ERROR_NONE on success.
+     * \return MESH_ERROR_UNKNOWN in case of failure.
+     * */
+    mesh_error_t set_network_domain_configuration(uint8_t regulatory_domain, uint8_t phy_mode_id, uint8_t channel_plan_id);
+
+    /**
+     * \brief Get Wi-SUN network regulatory domain, PHY mode ID and channel plan ID.
+     *
+     * Function reads regulatory_domain, phy_mode_id and channel_plan_id from mbed-mesh-api.
+     *
+     * \param regulatory_domain Values defined in Wi-SUN PHY-specification.
+     * \param phy_mode_id Values defined in Wi-SUN PHY-specification.
+     * \param channel_plan_id Values defined in Wi-SUN PHY-specification.
+     * \return MESH_ERROR_NONE on success.
+     * \return MESH_ERROR_UNKNOWN in case of failure.
+     * */
+    mesh_error_t get_network_domain_configuration(uint8_t *regulatory_domain, uint8_t *phy_mode_id, uint8_t *channel_plan_id);
+
+    /**
+     * \brief Validate Wi-SUN network regulatory domain, PHY mode ID and channel plan ID.
+     *
+     * Function validates regulatory_domain, phy_mode_id and channel_plan_id. Function can be used to test that values that will
+     * be used on set function are valid.
+     *
+     * \param regulatory_domain Values defined in Wi-SUN PHY-specification.
+     * \param phy_mode_id Values defined in Wi-SUN PHY-specification.
+     * \param channel_plan_id Values defined in Wi-SUN PHY-specification.
+     * \return MESH_ERROR_NONE on success.
+     * \return MESH_ERROR_UNKNOWN in case of failure.
+     * */
+    mesh_error_t validate_network_domain_configuration(uint8_t regulatory_domain, uint8_t phy_mode_id, uint8_t channel_plan_id);
+
     /**
      * \brief Set Wi-SUN network size.
      *

connectivity/nanostack/mbed-mesh-api/mbed_lib.json

@@ -136,6 +136,14 @@
             "help": "Operating mode as specified in the Wi-SUN PHY Specification. Wi-SUN stack uses operating-mode suitable for EU-region if value 255 is used.",
             "value": "255"
         },
+        "wisun-phy-mode-id": {
+            "help": "PHY mode ID as specified in the Wi-SUN PHY Specification. With default value 255, parameter is not used.",
+            "value": "255"
+        },
+        "wisun-channel-plan-id": {
+            "help": "Channel plan ID as specified in the Wi-SUN PHY Specification. With default value 255, parameter is not used.",
+            "value": "255"
+        },
         "wisun-uc-channel-function": {
             "help": "Unicast channel function as specified in the Wi-SUN FAN specification. Wi-SUN stack will select channel function if value 255 is used.",
             "value": 255

connectivity/nanostack/mbed-mesh-api/source/WisunInterface.cpp

@@ -98,6 +98,16 @@ nsapi_error_t WisunInterface::configure()
     }
 #endif
 
+#if (MBED_CONF_MBED_MESH_API_WISUN_PHY_MODE_ID != 255) || (MBED_CONF_MBED_MESH_API_WISUN_CHANNEL_PLAN_ID != 255)
+    status = set_network_domain_configuration(MBED_CONF_MBED_MESH_API_WISUN_REGULATORY_DOMAIN,
+                                              MBED_CONF_MBED_MESH_API_WISUN_PHY_MODE_ID,
+                                              MBED_CONF_MBED_MESH_API_WISUN_CHANNEL_PLAN_ID);
+    if (status != MESH_ERROR_NONE) {
+        tr_error("Failed to set domain configuration!");
+        return NSAPI_ERROR_PARAMETER;
+    }
+#endif
+
 #if (MBED_CONF_MBED_MESH_API_WISUN_UC_CHANNEL_FUNCTION != 255)
     status = set_unicast_channel_function(static_cast<mesh_channel_function_t>(MBED_CONF_MBED_MESH_API_WISUN_UC_CHANNEL_FUNCTION),
                                           MBED_CONF_MBED_MESH_API_WISUN_UC_FIXED_CHANNEL,
@@ -308,6 +318,36 @@ mesh_error_t WisunInterface::validate_network_regulatory_domain(uint8_t regulato
     return MESH_ERROR_NONE;
 }
 
+mesh_error_t WisunInterface::set_network_domain_configuration(uint8_t regulatory_domain, uint8_t phy_mode_id, uint8_t channel_plan_id)
+{
+    int status = ws_management_domain_configuration_set(get_interface_id(), regulatory_domain, phy_mode_id, channel_plan_id);
+    if (status != 0) {
+        return MESH_ERROR_UNKNOWN;
+    }
+
+    return MESH_ERROR_NONE;
+}
+
+mesh_error_t WisunInterface::get_network_domain_configuration(uint8_t *regulatory_domain, uint8_t *phy_mode_id, uint8_t *channel_plan_id)
+{
+    int status = ws_management_domain_configuration_get(get_interface_id(), regulatory_domain, phy_mode_id, channel_plan_id);
+    if (status != 0) {
+        return MESH_ERROR_UNKNOWN;
+    }
+
+    return MESH_ERROR_NONE;
+}
+
+mesh_error_t WisunInterface::validate_network_domain_configuration(uint8_t regulatory_domain, uint8_t phy_mode_id, uint8_t channel_plan_id)
+{
+    int status = ws_management_domain_configuration_validate(get_interface_id(), regulatory_domain, phy_mode_id, channel_plan_id);
+    if (status != 0) {
+        return MESH_ERROR_UNKNOWN;
+    }
+
+    return MESH_ERROR_NONE;
+}
+
 mesh_error_t WisunInterface::set_network_size(uint8_t network_size)
 {
     if (network_size == 0xff) {