High-Frequency Space Diffusion Model for Accelerated MRI

Official code for the paper "High-Frequency Space Diffusion Model for Accelerated MRI", published in TMI 2024.

by Chentao Cao*, Zhuo-Xu Cui*, Yue Wang*, Shaonan Liu, Taijin Chen, Hairong Zheng, Dong Liang, and Yanjie Zhu⁺(*denotes equal contribution, ⁺denotes corresponding author).

Illustration

Abstract

Diffusion models with continuous stochastic differential equations (SDEs) can serve as a deep generative prior to solving the inverse problem in magnetic resonance (MR) reconstruction. However, low-frequency regions of k-space data are typically fully sampled in fast MR imaging, while existing diffusion models are performed throughout the entire image or k-space, inevitably introducing uncertainty in the reconstruction of low-frequency regions. Additionally, existing diffusion models often demand substantial iterations to converge, resulting in time-consuming reconstructions. To address these challenges, we propose a novel SDE tailored specifically for MR reconstruction with the diffusion process in high-frequency space (referred to as HFS-SDE). This approach ensures determinism in the fully sampled low-frequency regions and accelerates the sampling procedure of reverse diffusion. Experiments conducted on the publicly available fastMRI dataset demonstrate that the proposed HFS-SDE method outperforms traditional parallel imaging methods, supervised deep learning, and existing diffusion models in terms of reconstruction accuracy and stability. The fast convergence properties are also confirmed through theoretical and experimental validation.

Adv

Checkout our

• 🔥🔥🔥 TMI'24 Work SPIRiT-Diffusion, by employing an optimization model in MRI, we guide the formulation of forward and reverse diffusion equations with inherent physical significance. This process facilitates the reconstruction of MR images or the completion of missing k-space data under imposed physical constraints.

Setup

The following will introduce environment setup, data preparation, usage instructions, experiment weights, and a quick start guide. In the quick start guide, we provide experiment weights and synthetic data for easy model validation without the need for lengthy data downloads. Additionally, the quick start guide will offer guidance on parameter settings for generating high-quality reconstruction samples.

Dependencies

Run the following to install a subset of necessary python packages for our code.

conda env create -f environment.yml

• Note: if your CUDA version is lower than 11.6, you may check on the freeinstall.sh. In this shell script, we provide all of Python packages we needed.

Data Preparation

Phantom dataset

To facilitate a quick start, we provide sample data located at data/photom.

fastMRI dataset

Download

For the training dataset, we used 973 individuals from the fastMRI multi-coil knee dataset. A total of 28904 T1- and T2-weighted images were finally involved in the training dataset. We selected two datasets for testing. One was the knee data from 3 individuals(file1000976.h5, file1001064.h5, and file1001077.h5) selected randomly from knee_multicoil_val (approximately 93.8 GB) dataset, and the other one was the brain data from 1 individual(file_brain_AXT2_200_2000019.h5).

These datasets can be downloaded here.

Preprocess

In the image domain, crop the data to 320x320 and perform sensitivity estimation using the BART toolbox. The Auto-Calibration Signal(ACS) region is set to 24x24.

Sensitivity Estimation Workflow

• Sensitivity Estimation: We employ the BART toolbox to estimate the sensitivity maps for the raw data(h5 files downloaded above). The ACS region for this estimation is set to 24x24 pixels.

• The sensitivity maps are essential for parallel imaging techniques, such as parallel MRI (magnetic resonance imaging), to improve image reconstruction by accounting for the sensitivity of each coil element.

• Code Location: You can find the code for sensitivity estimation in the data_prepare/generate_smaps_phantom.py and data_prepare/generate_smaps_fastMRI.py.

Please ensure that you have the necessary libraries and tools, including BART, installed and configured to perform these operations on your data.

Data Slice Saving

Since fastmri dataset is too large, we save its index as a pkl file for quick loading.

• The code for generating this pkl file is in data_prepare/save_data_slice.py. Execute the script to save data slices.

Mask Preparation

• The code for generating undersampling mask is in utils\generate_mask.py.
• The low-frequency mask and undersampling masks are provided in mask\.

Usage

Train and evaluate our models through main.py.

main.py:
  --config: Training configuration.
    (default: 'None')
  --mode: <train|sample>: Running mode: train or sample
  --workdir: Working directory

• config is the path to the config file. Our prescribed config files are provided in configs/. They are formatted according to ml_collections and should be quite self-explanatory.

  Naming conventions of config files: the path of a config file is a combination of the following dimensions:

  config
  ├── ve
  │   └── ddpm_continuous.py
  ├── vp
  │   └── ddpm_continuous.py
  └── hfssde
      └── ddpm_continuous.py
  

  • method: One of ve, vp, hfssde, corresponding to VE-SDE, VP-SDE, HFS-SDE, respectively.
  • model: One of ncsnpp, ddpm.
  • Note that we use ddpm_continuous.py in all experiments(hfssde, vpsde, and vesde).

• workdir is the path that stores all artifacts of one experiment, like checkpoints, samples, and evaluation results.

• mode is either "train" or "sample". When set to "train", it starts the training of a new model. When set to "sample", it can do an arbitrary combination of the following

  • In this process, MRI reconstruction is performed on undersampled k-space data, and the following metrics are computed: NMSE (Normalized Mean Squared Error), PSNR (Peak Signal-to-Noise Ratio), and SSIM (Structural Similarity Index). The results are saved at the path results/model_name.

Pretrained checkpoints

All checkpoints are provided here.

Quick Start Guide

Training

We provided the training script train_fastMRI.sh , just as Usage provided.

Navigate to the default configuration file located at configs\default_fastMRI_configs.py.

• In this file, modify the following parameters:training.epochs, optim.lr, config.training.batch_size. Adjust config.training.batch_size according to your GPU memory capacity.
• It's worth noting that we have not made any changes to these parameters in our publicly available experiment weight training.

To make changes to the configuration file, configs\hfssde\ddpm_continuous.py, follow these steps and adjust the following parameters:

• Open the configuration file located at configs\hfssde\ddpm_continuous.py.

• Set the following parameters with their respective meanings based on the table below:

Parameter	Meaning	Example Value
training.mask_type	Type of data undersampling mask	low_frequency (if 1D-sample),center(if 2D-sample)
training.acc	Acceleration factor for undersampling	4 or every positive value
training.acs	Auto-Calibration Signal (ACS) region size	24 or every positive value

Please update these parameters in the configuration file according to your requirements.

Note: Make sure that the relative mask exists. check your mask dir, the mask name rule is followed next:

training.mask_type + _length + training.acs + .mat

Run the next code to train your model.

bash train_fastMRI.sh hfssde

• hfssde is one of the choices; you can replace it with another parameter, such as vesde or vpsde.

• If you just want to apply our model, you have a better choice in using our checkpoint. Please download our checkpoint and start to sample or reconstruct the MRI image.

Sampling

We prepare to apply our model and use phantom data referred to below to reconstruct a high-quality image.

Note: Please make sure that you download the checkpoint or you have trained a model.

• Open the configuration file located at configs\hfssde\ddpm_continuous.py.
• Set parameters related to undersampling: sampling.mask_type, sampling.acc, sampling.acs. Make sure that the related mask exists.
• If you want to speed up the sampling process, you should also adjust the settings for sampling.N and sampling.accelerated_sampling.
• Set sampling parameters in the the table below:

Parameter	Meaning	Example Value
sampling.snr	Adjust SNR: Higher values mean more noise, lower values mean more undersampling artifacts	between 0 and 1
sampling.mse	Control the overall error of the predictor, where a larger value increases the weight of the score.	non-negative value
sampling.corrector_mse	Control the overall error of the corrector, where a larger value gives more weight to the score.	non-negative value
sampling.N	Set the sampling steps to a lower value to accelerate the sampling process.	positive integer
sampling.accelerated_sampling	Enable accelerated sampling to improve speed. Set to 'true' for faster sampling.	'true' or 'false'

• Execute the following code.

bash test_fastMRI.sh hfssde

Tuning Guidelines:

Training

• Note: Due to the limitation of computational resources, the pre-training weights we provide are all 190 epochs. We believe that a larger training epoch can further improve the performance of the model

Sampling

• After reconstruction, examine the corresponding image.
• If there are artifacts, increase the sampling.snr value.
• If the image appears blurry or has excessive noise, decrease the sampling.snr value.
• If the reconstruction quality is good but there's a global brightness issue, adjust sampling.corrector_mse or sampling.mse values.
• For sampling.snr, we recommend trying values in increments of 0.1, using 0.01 or 0.02 as step intervals for a greedy search.
• For sampling.corrector_mse or sampling.mse values, no exact solution is required. Use an exponential search approach, for example, 0.01, 0.1, 1.0, 10.0...
• If using accelerated sampling, it is recommended to set the value of sampling.N to be greater than 100. Setting it below 100 will result in poor image quality.

These guidelines will help you fine-tune the parameters effectively.

References

If you find the code useful for your research, please consider citing

@article{cao2024hfs,
  author={Cao, Chentao and Cui, Zhuo-Xu and Wang, Yue and Liu, Shaonan and Chen, Taijin and Zheng, Hairong and Liang, Dong and Zhu, Yanjie},
  journal={IEEE Transactions on Medical Imaging}, 
  title={High-Frequency Space Diffusion Model for Accelerated MRI}, 
  year={2024},
  volume={43},
  number={5},
  pages={1853-1865},
  doi={10.1109/TMI.2024.3351702}}

Our implementation is based on Score-based SDE by Dr. Yang Song. And we also borrowed some code from csgm-mri-langevin. Thanks for their great works!

Questions

If you have any problem, please contact [email protected]