Merge pull request #192 from srg74/main

Firmware links update

docs/basics/compatible-controllers.md

@@ -49,7 +49,7 @@ In the following some third-party controllers are listed. Please use a decent an
 [Domestic Automation LLC](www.domestic-automation.com) | Plug in design makes it the easiest and quickest preinstalled WLED controller to setup! Modular design allows for simple plug-in addition of Motion sensors, Button control, 12V lights and more. Snap track makes for universal mounting. Includes built in fuses and power relay for safety and control. Available on Amazon [here](https://amzn.to/3XFTjpb)
 [ESP8266 Pixel Controller](https://www.maltepoeggel.de/?site=pixelcontroller) | DIY board for 5V/12V LED strips with TTL or RS485 output using a Wemos D1 mini, integrated fuse, pluggable terminal block, 3D printed module case
 [ESPthings.io ET-AL01](https://www.espthings.io/AL01) | DIY board for 5 Analog channels and/or up to 5 Digital LED channels (or a combination of the latter as required), Integrated level shifter, 5v/12/24v compatibility, 4x pull-up/down GPIO, serial interface and power distribution terminals. Can be used with Wemos D1-style ESP8266 or ESP32 boards.
-![Gold Member](../assets/images/content/akemi_gold.png)<br/> [ESP32 WLED Pico Board](https://www.tindie.com/products/28276/) | ESP32 WLED pico board,super small form factor, ready to buy on [Tindie](https://www.tindie.com/products/28276/) and [Tindie EU](https://www.tindie.com/products/moonmodules/esp32-pico-board-with-digital-microphone/). Integrated level shifter, exposed pins for extending functionality , on board I2S microphone, [Firmware is here](https://github.com/srg74/WLED-ESP32-pico/tree/main/Firmware). Project page is [here](https://github.com/srg74/WLED-ESP32-pico)
+![Gold Member](../assets/images/content/akemi_gold.png)<br/> [ESP32 WLED Pico Board](https://www.tindie.com/products/28276/) | ESP32 WLED pico board,super small form factor, ready to buy on [Tindie](https://www.tindie.com/products/28276/) and [Tindie EU](https://www.tindie.com/products/moonmodules/esp32-pico-board-with-digital-microphone/). Integrated level shifter, exposed pins for extending functionality , on board I2S microphone, [Firmware is here](https://github.com/srg74/WLED-wemos-shield/tree/master/resources/Firmware/%40Aircoookie/Latest). Project page is [here](https://github.com/srg74/WLED-ESP32-pico)
 [Hikari](https://github.com/goodmicros/hikari) | Pocket-sized, battery powered RGBW light
 [HighSet WLED Controller India](https://highset.in/eshop/WLED-India/wled-controller-India) | ESP32 Based Ready to use WLED device for 5V Pixel LEDs with Shift Resistor Pre-Installed & 4 Outputs in Premium Quality Sealed Enclosure, Customized Orders also Welcomed.
 [IOT4WLED](https://iot4.eu/product/iot4wled/) | Ready to use hardware for WLED!
@@ -66,7 +66,7 @@ In the following some third-party controllers are listed. Please use a decent an
 [Simple WLED Board](https://github.com/wladwnt/wled) | Very simple DIY board, minimum of required components, option for 5V/12V LEDs. Easy to solder (no SMT components). Simple to understand connection schematics and pictures. Can be used with ESP8266 or ESP32 in D1 mini Format.
 ![Gold Member](../assets/images/content/akemi_gold.png)<br/> [SJM Autoprod rgbw, rgbw2+, rgbw4](https://sjmautoprod.com/RGB-Controllers/rgbwX-Wi-Fi-Controllers.html) | Complete, fully-sealed, analog and digital controllers for vehicular use. rgbw has one RGBW channel, rgbw2+ has two analog, RGBW channels plus two/four addressable outputs (requires external 5V source for 5V LEDs). rgbw4 has four analog RGBW channels. 2+ and 4 support 12V or PWM/analog inputs and have internal PTC "fuses".
 [WiFi Controlled Desk Lamp](https://github.com/stanoba/wifi-desk-lamp) | Open source PCB for WLED
-![Gold Member](../assets/images/content/akemi_gold.png)<br/> [WLED ESP32 Universal Controller](https://github.com/srg74/WLED-ESP32-universal-controller) | ready to buy on [Tindie](https://www.tindie.com/products/27056/), 100% compatible with WLED project. Integrated level shifter, 2 outputs for LEDs strips, 1 fused out for LED strip, relay for energy-saving, temperature sensor, PWM fan header, USB port for re-programing. Headers for shields to extend functionality. Available [shields for controller is here](https://www.tindie.com/stores/serg74/),  [Firmware is here](https://github.com/srg74/WLED-ESP32-universal-controller/tree/main/Firmware).
+![Gold Member](../assets/images/content/akemi_gold.png)<br/> [WLED ESP32 Universal Controller](https://github.com/srg74/WLED-ESP32-universal-controller) | ready to buy on [Tindie](https://www.tindie.com/products/27056/), 100% compatible with WLED project. Integrated level shifter, 2 outputs for LEDs strips, 1 fused out for LED strip, relay for energy-saving, temperature sensor, PWM fan header, USB port for re-programing. Headers for shields to extend functionality. Available [shields for controller is here](https://www.tindie.com/stores/serg74/),  [Firmware is here](https://github.com/srg74/WLED-wemos-shield/tree/master/resources/Firmware/%40Aircoookie/Latest/esp32_wled_dev_board).
 ![Gold Member](../assets/images/content/akemi_gold.png)<br/> [WLED Waterproof Controller with external antenna](https://github.com/srg74/Controller-for-WLED-firmware) | DIY board, designed for use outside permanently and for longer range Wi-Fi connection. No SMD components means it is easier to solder for DIYers. 100% compatible with WLED project. Level shifter, fuse for LED strip, resettable fuse for Wi-Fi module, exposed I2C interface for display or sensors, relay for energy-saving and 1-wire temperature sensor. Build around ESP-07S module. [Firmware is here](https://github.com/srg74/WLED-wemos-shield/tree/master/resources/Firmware/WLED_wemos_shield)
 ![Gold Member](../assets/images/content/akemi_gold.png)<br/> [WLED Wemos Mini Shield](https://github.com/srg74/WLED-wemos-shield/tree/master/resources/mini_shield) | shield board, ready to buy on [Tindie](https://www.tindie.com/products/22680/) also [Tindie EU](https://www.tindie.com/products/28777/). Integrated level shifter, 2 outputs for LEDs strips, 1 fused out for LED strip, resettable fuse for the development board, exposed I2C interface for display or sensors. Exposed pins Digital microphones. Works with Wemos D1 mini and D1-style ESP32 boards. [Firmware is here](https://github.com/srg74/WLED-wemos-shield/tree/master/resources/Firmware/WLED_wemos_shield).
 [Yet Another WLED Controller](https://github.com/lizardsystems/yawl-controller) | Small and simple device for 5V addressable LED strips with minimum components and fully assembled by PCB manufacturing service in standard case. [Firmware is here](https://github.com/lizardsystems/yawl-controller/tree/main/firmware/WLED)
@@ -88,8 +88,8 @@ SP501e | ESP8285 | 8285-based 1M Controller that supports both Addressable and P
 | Name | Description |
 |---|---|
 [ABC! WLED Shield, all-purpose, for ESP8266/ESP32](https://shop.myhome-control.de/ABC-WLED-Basis-Board-fuer-5V-und-12V-LED-universell/HW10008) | Commercial WLED Shield for 5V/12V LED strips. To be used with ESP8266 or ESP32 in D1 mini format. Two outputs. Option for digital microphone or [line-in-to-I2S Adapter](https://shop.myhome-control.de/Line-In-zu-I2S-Adapter-fuer-WLED-Controller/HW10013) for sound reactive WLED (with ESP32 only!). Automatic 5V/12V recognition (no jumper/switch etc. required). Enclosure is available too. German shop & shipping currently only within Germany.
-![Gold Member](../assets/images/content/akemi_gold.png)<br/> [ESP-01 WLED shield](https://www.tindie.com/products/24901/) | shield board for ESP-01 board, ready to buy on [Tindie](https://www.tindie.com/products/24901/). Integrated level shifter, 3 outputs for various configurations, mosfet for 1 analog channel, [Firmware is here](https://github.com/srg74/WLED-wemos-shield/tree/master/resources/Firmware/WLED_wemos_shield).
-![Gold Member](../assets/images/content/akemi_gold.png)<br/> [WLED Wemos shield](https://github.com/srg74/WLED-wemos-shield) | shield board, ready to buy on [Tindie](https://www.tindie.com/products/22307/) also [Tindie EU](https://www.tindie.com/products/28787/) or DIY 100% compatible with WLED project and WLED [sound reactive fork](https://github.com/atuline/WLED). Integrated level shifter, 4 outputs for LEDs strips, 1 fused out for LED strip, resettable fuse for the development board, exposed I2C interface for display or sensors, relay for energy-saving and 1-wire temperature sensor. Exposed pins for Analog and Digital microphones. Works with Wemos D1 mini and D1-style ESP32 boards. [Firmware is here](https://github.com/srg74/WLED-wemos-shield/tree/master/resources/Firmware/WLED_wemos_shield).
+![Gold Member](../assets/images/content/akemi_gold.png)<br/> [ESP-01 WLED shield](https://www.tindie.com/products/24901/) | shield board for ESP-01 board, ready to buy on [Tindie](https://www.tindie.com/products/24901/). Integrated level shifter, 3 outputs for various configurations, mosfet for 1 analog channel, [Firmware is here](https://github.com/srg74/WLED-wemos-shield/tree/master/resources/Firmware/%40Aircoookie/Latest).
+![Gold Member](../assets/images/content/akemi_gold.png)<br/> [WLED Wemos shield](https://github.com/srg74/WLED-wemos-shield) | shield board, ready to buy on [Tindie](https://www.tindie.com/products/22307/) also [Tindie EU](https://www.tindie.com/products/28787/) or DIY 100% compatible with WLED project and WLED [sound reactive fork](https://github.com/atuline/WLED). Integrated level shifter, 4 outputs for LEDs strips, 1 fused out for LED strip, resettable fuse for the development board, exposed I2C interface for display or sensors, relay for energy-saving and 1-wire temperature sensor. Exposed pins for Analog and Digital microphones. Works with Wemos D1 mini and D1-style ESP32 boards. [Firmware is here](https://github.com/srg74/WLED-wemos-shield/tree/master/resources/Firmware/%40Aircoookie/Latest/universal_shield).
 
 ## Other products WLED can be installed to