Fixes for emmc unreliability (sonic-net#270)

patch/driver-arista-mmcblk-not-working-on-AMD-platforms.patch

@@ -0,0 +1,58 @@
+amd/mmc: mmcblk not working on some AMD platforms
+
+ADMA and ADMA-64 seem to be broken on AMD. This patch enables the
+following quirks (for AMD only):
+    SDHCI_QUIRK_BROKEN_ADMA
+    SDHCI_QUIRK2_BROKEN_64_BIT_DMA
+
+This fixes issues that would manifest in the following fashion.
+
+mmc0: Timeout waiting for hardware interrupt.
+sdhci: =========== REGISTER DUMP (mmc0)===========
+sdhci: Sys addr: 0x00000078 | Version:  0x00001002
+sdhci: Blk size: 0x00007200 | Blk cnt:  0x00000078
+sdhci: Argument: 0x000ab148 | Trn mode: 0x0000003b
+sdhci: Present:  0x01ff0001 | Host ctl: 0x00000019
+sdhci: Power:    0x0000000f | Blk gap:  0x00000000
+sdhci: Wake-up:  0x00000000 | Clock:    0x0000fa07
+sdhci: Timeout:  0x0000000c | Int stat: 0x00000000
+sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
+sdhci: AC12 err: 0x00000002 | Slot int: 0x000000ff
+sdhci: Caps:     0x75fec8b2 | Caps_1:   0x00002501
+sdhci: Cmd:      0x0000123a | Max curr: 0x00c80064
+sdhci: Host ctl2: 0x00000000
+sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x000000020f97b20c
+sdhci: ===========================================
+mmcblk0: error -110 sending status command, retrying
+mmcblk0: error -110 sending status command, retrying
+mmcblk0: error -110 sending status command, aborting
+mmc0: cache flush error -110
+mmc0: tried to reset card, got error -110
+blk_update_request: I/O error, dev mmcblk0, sector 700744
+blk_update_request: I/O error, dev mmcblk0, sector 700752
+
+Signed-off-by: Radu Rendec <[email protected]>
+Signed-off-by: Samuel Angebault <[email protected]>
+---
+ drivers/mmc/host/sdhci-pci-core.c |    7 ++++++-
+ 1 file changed, 6 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
+index bf04a08ee..c10790dd6 100644
+--- a/drivers/mmc/host/sdhci-pci-core.c
++++ b/drivers/mmc/host/sdhci-pci-core.c
+@@ -1791,8 +1791,13 @@ static int amd_probe(struct sdhci_pci_chip *chip)
+ 		}
+ 	}
+
+-	if (gen == AMD_CHIPSET_BEFORE_ML || gen == AMD_CHIPSET_CZ)
++	dev_info(&chip->pdev->dev, "identified AMD generation %d chip\n", gen);
++
++	if (gen == AMD_CHIPSET_BEFORE_ML || gen == AMD_CHIPSET_CZ) {
++		chip->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
++		chip->quirks2 |= SDHCI_QUIRK2_BROKEN_64_BIT_DMA;
+ 		chip->quirks2 |= SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD;
++	}
+
+ 	return 0;
+ }

patch/driver-arista-restrict-eMMC-drive-to-50Mhz-from-userland.patch

@@ -0,0 +1,70 @@
+mmc: restrict eMMC drive to 50Mhz from userland
+
+This issue was fixed for kernel 3.18 by setting sdhci.debug_quirks2=0x40
+from Aboot boot0 (conditionally, for specific Aboot versions).
+
+For kernel 4.9, however, we need SDHCI_QUIRK2_BROKEN_64_BIT_DMA, which
+is also in quirks2. The problem is that debug_quirks2 overwrites whatever
+is written to host->quirks2 during device probing (see __sdhci_read_caps).
+Since we set both SDHCI_QUIRK_BROKEN_DMA and
+SDHCI_QUIRK2_BROKEN_64_BIT_DMA (but the former is in quirks while the
+latter is in quirks2) and Aboot overwrites quirks2, we end up with only
+SDHCI_QUIRK_BROKEN_DMA being set. This causes some strange behavior with
+AMD devices, where the sdhci driver stalls for a while and eventually
+falls back to PIO mode. We need both quirk flags to be set in order for
+the controller to work in SDMA mode.
+
+This patch is a workaround for the quirks2 overwrite problem. It adds a
+set of new sdhci module parameters (append_quirks and append_quirks2)
+that *append* bits (i.e. logical "or") instead of overwriting the
+values. Then Aboot can use these parameters instead in order to set
+SDHCI_QUIRK2_BROKEN_HS200. Note that both quirk2 flags are set
+conditionally and independently by Aboot and the sdhci-pci probe code.
+
+Advantages of this approach:
+* This patch by itself doesn't change any kernel behavior: it just adds
+  two module parameters that default to zero and will have no effect
+  unless explicitly set to a different value from outside the driver.
+* SDHCI_QUIRK2_BROKEN_HS200 can be still controlled from Aboot and
+  conditionally (depending on the Aboot version).
+* SDHCI_QUIRK2_BROKEN_64_BIT_DMA can be set by the sdhci-pci probing
+  code, independently of Aboot.
+
+Signed-off-by: Radu Rendec <[email protected]>
+Signed-off-by: Samuel Angebault <[email protected]>
+---
+ drivers/mmc/host/sdhci.c |    7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
+index b1e1d327c..817934f04 100644
+--- a/drivers/mmc/host/sdhci.c
++++ b/drivers/mmc/host/sdhci.c
+@@ -45,6 +45,8 @@
+
+ #define MAX_TUNING_LOOP 40
+
++static unsigned int append_quirks;
++static unsigned int append_quirks2;
+ static unsigned int debug_quirks = 0;
+ static unsigned int debug_quirks2;
+
+@@ -3990,6 +3992,9 @@ void __sdhci_read_caps(struct sdhci_host *host, const u16 *ver,
+
+ 	host->read_caps = true;
+
++	host->quirks |= append_quirks;
++	host->quirks2 |= append_quirks2;
++
+ 	if (debug_quirks)
+ 		host->quirks = debug_quirks;
+
+@@ -4850,6 +4855,8 @@ static void __exit sdhci_drv_exit(void)
+ module_init(sdhci_drv_init);
+ module_exit(sdhci_drv_exit);
+
++module_param(append_quirks, uint, 0444);
++module_param(append_quirks2, uint, 0444);
+ module_param(debug_quirks, uint, 0444);
+ module_param(debug_quirks2, uint, 0444);
+

patch/series

@@ -4,6 +4,8 @@ driver-arista-net-tg3-dma-mask-4g-sb800.patch
 driver-arista-net-tg3-disallow-broadcom-default-mac.patch
 driver-arista-net-tg3-access-regs-indirectly.patch
 driver-arista-pci-reassign-pref-mem.patch
+driver-arista-mmcblk-not-working-on-AMD-platforms.patch
+driver-arista-restrict-eMMC-drive-to-50Mhz-from-userland.patch
 driver-support-sff-8436-eeprom.patch
 driver-support-sff-8436-eeprom-update.patch
 driver-sff-8436-use-nvmem-framework.patch