Service Bus Session Support #441
Comments
|
+1 for SessionID Support. This is critical for handling message groups or large message which require splitting. |
|
the service bus is not in this repo anymore, so if this is still an issue, it should go there: |
conniey
referenced
this issue
in conniey/azure-sdk-for-java
Apr 27, 2019
conniey
added a commit
that referenced
this issue
Apr 30, 2019
* Update Apache Proton-J dependency (0.29.0 --> 0.31.0) (#407) * PartitionReceiver - add a method that provides an EventPosition which corresponds to an EventData returned last by the receiver (#408) * Support IsPartitionEmpty property for PartitionRuntimeInformation (#399) * Move setPrefetchCount API to the ReceiverOptions class from the PartitionReceiver and update the settings of Default & Max Prefetch count (#410) This pull request includes two major changes related to Prefetch API. 1) Move setPrefetchCount API to the ReceiverOptions class so that prefetch value specified by a user can be used instead of using default value when communicating to the service during link open and initializing a receiver. This change also addresses the receiver stuck issue caused by setPrefetchAPI in a race condition. 2) Change the default value and set the upper bound of the prefetch count. Note that prefetch count should be greater than or equal to maxEventCount which can be set when either a) calling receive() API or b) implementing the getMaxEventCount API of the SessionReceiverHandler interface. * Fixes several issues in the reactor related components (#411) This pull request contains the following changes. 1) Finish pending tasks when recreating the reactor and make sure pending calls scheduled on the old reactor get complete. 2) Fix the session open timeout issue which can result in NPE in proton-J engine. 3) Make session open timeout configurable and use the value of OperationTimeout. 4) Update the message of exceptions and include an entity name in the exception message. 5) API change - use ScheduledExecutorService. 6) Improve tracing. * Implement comparable on EventData (#395) * Update receive/send link creation logic and improve tracing (#414) * Prep for releasing client 2.0.0 and EPH 2.2.0 (#415) * Ensure that links are closed when transport error occurrs (#417) * ensure links are recreated on transport/connection failure * update API document for EventProcessorOptions class * add traces for link create/close case * Prep for releasing client 2.1.0 and EPH 2.3.0 (#418) * Update prefetch sendflow logic and increment version for new release (#420) * Fix args for proxy auth call to Authenticator (#421) * Prepare EPH 2.3.4 release (#423) * Prepare EPH 2.4.0 release (#423) (#424) * Handle proton:io errors with meaningful error msg (#427) * Handle proton:io errors with meaningful error msg * Use Proton-supplied message if present * Minor changes to lease scanner (#428) * Add logging if the scanner threw an exception. * Change logging level to warn when scanner shuts down for any reason. * Scanner can call EventProcessorOptions.notifyOfException, which calls user code. Change notifyOfException to defensively catch any exceptions coming out of user code. * Make EventData.SystemProperties completely public (#435) Porting testability changes from .NET Core to Java: provide full access to EventData's SystemProperties so that a complete EventData can be fabricated in tests. * Digest Support: init first connection with null headers (#431) Related to Azure/qpid-proton-j-extensions#10 * Fix lease scanner issues when Storage unreachable (#434) This fix is for issue #432. There are two parts: AzureStorageCheckpointLeaseManager performs certain Storage actions within a forEach. If those actions fail, the StorageException gets wrapped in a NoSuchElementException. Catch those and strip off the NoSuchElementException, then handle the StorageException in the existing way. The unexpected NoSuchElementExceptions were not being caught anywhere and the scanner thread was dying without rescheduling itself. Added code in PartitionMananger.scan to catch any exceptions that leak out of PartitionScanner and reschedule the scanner unless the host instance is shutting down. * message receiver - fix null pointer error and ensure that receive link is recreated upon a failure (#439) * message receiver/sender - fix null pointer error and ensure that receive/send link is recreated on a failure. * Update version numbers for release (#440) * Update prefetch count for a receiver (#441) * Fix an issue of creating multiple sessions for $management & $cbs channel for a single connection and improve logging (#443) * Fix an issue of creating multiple sessions for $management & $cbs for a connection and improve logging * Running through java files and double checking changes * Fix casing on test names * Ignore testcases that hang. * Fix NullPointerException when there is no inner exception * Move parent node to the top of the file. * Update version numbers in spotbugs-reporting * Increasing wait time until event hub scheduler is completed.
conniey
added a commit
that referenced
this issue
May 3, 2019
* Update Apache Proton-J dependency (0.29.0 --> 0.31.0) (#407) * PartitionReceiver - add a method that provides an EventPosition which corresponds to an EventData returned last by the receiver (#408) * Support IsPartitionEmpty property for PartitionRuntimeInformation (#399) * Move setPrefetchCount API to the ReceiverOptions class from the PartitionReceiver and update the settings of Default & Max Prefetch count (#410) This pull request includes two major changes related to Prefetch API. 1) Move setPrefetchCount API to the ReceiverOptions class so that prefetch value specified by a user can be used instead of using default value when communicating to the service during link open and initializing a receiver. This change also addresses the receiver stuck issue caused by setPrefetchAPI in a race condition. 2) Change the default value and set the upper bound of the prefetch count. Note that prefetch count should be greater than or equal to maxEventCount which can be set when either a) calling receive() API or b) implementing the getMaxEventCount API of the SessionReceiverHandler interface. * Fixes several issues in the reactor related components (#411) This pull request contains the following changes. 1) Finish pending tasks when recreating the reactor and make sure pending calls scheduled on the old reactor get complete. 2) Fix the session open timeout issue which can result in NPE in proton-J engine. 3) Make session open timeout configurable and use the value of OperationTimeout. 4) Update the message of exceptions and include an entity name in the exception message. 5) API change - use ScheduledExecutorService. 6) Improve tracing. * Implement comparable on EventData (#395) * Update receive/send link creation logic and improve tracing (#414) * Prep for releasing client 2.0.0 and EPH 2.2.0 (#415) * Ensure that links are closed when transport error occurrs (#417) * ensure links are recreated on transport/connection failure * update API document for EventProcessorOptions class * add traces for link create/close case * Prep for releasing client 2.1.0 and EPH 2.3.0 (#418) * Update prefetch sendflow logic and increment version for new release (#420) * Fix args for proxy auth call to Authenticator (#421) * Prepare EPH 2.3.4 release (#423) * Prepare EPH 2.4.0 release (#423) (#424) * Handle proton:io errors with meaningful error msg (#427) * Handle proton:io errors with meaningful error msg * Use Proton-supplied message if present * Minor changes to lease scanner (#428) * Add logging if the scanner threw an exception. * Change logging level to warn when scanner shuts down for any reason. * Scanner can call EventProcessorOptions.notifyOfException, which calls user code. Change notifyOfException to defensively catch any exceptions coming out of user code. * Make EventData.SystemProperties completely public (#435) Porting testability changes from .NET Core to Java: provide full access to EventData's SystemProperties so that a complete EventData can be fabricated in tests. * Digest Support: init first connection with null headers (#431) Related to Azure/qpid-proton-j-extensions#10 * Fix lease scanner issues when Storage unreachable (#434) This fix is for issue #432. There are two parts: AzureStorageCheckpointLeaseManager performs certain Storage actions within a forEach. If those actions fail, the StorageException gets wrapped in a NoSuchElementException. Catch those and strip off the NoSuchElementException, then handle the StorageException in the existing way. The unexpected NoSuchElementExceptions were not being caught anywhere and the scanner thread was dying without rescheduling itself. Added code in PartitionMananger.scan to catch any exceptions that leak out of PartitionScanner and reschedule the scanner unless the host instance is shutting down. * message receiver - fix null pointer error and ensure that receive link is recreated upon a failure (#439) * message receiver/sender - fix null pointer error and ensure that receive/send link is recreated on a failure. * Update version numbers for release (#440) * Update prefetch count for a receiver (#441) * Fix an issue of creating multiple sessions for $management & $cbs channel for a single connection and improve logging (#443) * Fix an issue of creating multiple sessions for $management & $cbs for a connection and improve logging * Update version numbers for new release (#444) * Update spotbugs.xml report versions
Sign up for free
to subscribe to this conversation on GitHub.
Already have an account?
Sign in.
Right now I think it's not possible to receive a message on a queue that uses Session filtering only by one SessionId as we can do in C# with the following code:
MessageSession receiver = null;
receiver = queueClient.AcceptMessageSession(msg.ReplyToSessionId);
BrokeredMessage receivedMessage = receiver.Receive(TimeSpan.FromSeconds(timeout));
Are there any plans to include this feature in the java SDK ?
The text was updated successfully, but these errors were encountered: