Scheduled events on standalone VM - terminate notification #20356
Conversation
shpa-microsoft
requested review from
allenjzhang,
bquantump,
m-nash,
markcowl,
nisha-bhatia and
YalinLi0312
as code owners
ghost
added
the
|
This pull request is protected by Check Enforcer. What is Check Enforcer?Check Enforcer helps ensure all pull requests are covered by at least one check-run (typically an Azure Pipeline). When all check-runs associated with this pull request pass then Check Enforcer itself will pass. Why am I getting this message?You are getting this message because Check Enforcer did not detect any check-runs being associated with this pull request within five minutes. This may indicate that your pull request is not covered by any pipelines and so Check Enforcer is correctly blocking the pull request being merged. What should I do now?If the check-enforcer check-run is not passing and all other check-runs associated with this PR are passing (excluding license-cla) then you could try telling Check Enforcer to evaluate your pull request again. You can do this by adding a comment to this pull request as follows: What if I am onboarding a new service?Often, new services do not have validation pipelines associated with them. In order to bootstrap pipelines for a new service, please perform following steps: For data-plane/track 2 SDKs Issue the following command as a pull request comment:
For track 1 management-plane SDKsPlease open a separate PR and to your service SDK path in this file. Once that PR has been merged, you can re-run the pipeline to trigger the verification. |
|
/check-enforcer evaluate |
|
/check-enforcer reset |
|
@shpa-microsoft Could you provide a link to the swagger review pr in azure-rest-api-specs repo? |
shpa-microsoft
changed the base branch from
cplat_2021-03-01
to
feature/cplat2021-03-01
|
@YalinLi0312 I updated the description and pasting it here too Azure/azure-rest-api-specs#13351 |
|
@shpa-microsoft You can follow the checklist in this PR's description, please update:
Additionally, make sure there's no manual change in the generated code and has proper test coverage for your updates. |
| @@ -0,0 +1,90 @@ | |||
| { | |||
There was a problem hiding this comment.
this file shouldn't be needed. So are other misc. json files below.
There was a problem hiding this comment.
Agreed, I don't know why these are here.
There was a problem hiding this comment.
I didn't add them manually. Swagger generation through autorest created those. What should I do? Rever the unnecessary ones?
| /// <param name="identity">The identity of the virtual machine, if | ||
| /// configured.</param> | ||
| /// <param name="zones">The virtual machine zones.</param> | ||
| public VirtualMachineUpdate(IDictionary<string, string> tags = default(IDictionary<string, string>), Plan plan = default(Plan), HardwareProfile hardwareProfile = default(HardwareProfile), StorageProfile storageProfile = default(StorageProfile), AdditionalCapabilities additionalCapabilities = default(AdditionalCapabilities), OSProfile osProfile = default(OSProfile), NetworkProfile networkProfile = default(NetworkProfile), SecurityProfile securityProfile = default(SecurityProfile), DiagnosticsProfile diagnosticsProfile = default(DiagnosticsProfile), SubResource availabilitySet = default(SubResource), SubResource virtualMachineScaleSet = default(SubResource), SubResource proximityPlacementGroup = default(SubResource), string priority = default(string), string evictionPolicy = default(string), BillingProfile billingProfile = default(BillingProfile), SubResource host = default(SubResource), SubResource hostGroup = default(SubResource), string provisioningState = default(string), VirtualMachineInstanceView instanceView = default(VirtualMachineInstanceView), string licenseType = default(string), string vmId = default(string), string extensionsTimeBudget = default(string), int? platformFaultDomain = default(int?), VirtualMachineIdentity identity = default(VirtualMachineIdentity), IList<string> zones = default(IList<string>)) | ||
| public VirtualMachineUpdate(IDictionary<string, string> tags = default(IDictionary<string, string>), Plan plan = default(Plan), HardwareProfile hardwareProfile = default(HardwareProfile), StorageProfile storageProfile = default(StorageProfile), AdditionalCapabilities additionalCapabilities = default(AdditionalCapabilities), OSProfile osProfile = default(OSProfile), NetworkProfile networkProfile = default(NetworkProfile), SecurityProfile securityProfile = default(SecurityProfile), DiagnosticsProfile diagnosticsProfile = default(DiagnosticsProfile), SubResource availabilitySet = default(SubResource), SubResource virtualMachineScaleSet = default(SubResource), SubResource proximityPlacementGroup = default(SubResource), string priority = default(string), string evictionPolicy = default(string), BillingProfile billingProfile = default(BillingProfile), SubResource host = default(SubResource), SubResource hostGroup = default(SubResource), string provisioningState = default(string), VirtualMachineInstanceView instanceView = default(VirtualMachineInstanceView), string licenseType = default(string), string vmId = default(string), string extensionsTimeBudget = default(string), int? platformFaultDomain = default(int?), ScheduledEventsProfile scheduledEventsProfile = default(ScheduledEventsProfile), VirtualMachineIdentity identity = default(VirtualMachineIdentity), IList<string> zones = default(IList<string>)) |
There was a problem hiding this comment.
Please adjust order in swagger to avoid signature change.
| /// <param name="resources">The virtual machine child extension | ||
| /// resources.</param> | ||
| /// <param name="identity">The identity of the virtual machine, if | ||
| /// configured.</param> | ||
| /// <param name="zones">The virtual machine zones.</param> | ||
| /// <param name="extendedLocation">The extended location of the Virtual | ||
| /// Machine.</param> | ||
| public VirtualMachine(string location, string id = default(string), string name = default(string), string type = default(string), IDictionary<string, string> tags = default(IDictionary<string, string>), Plan plan = default(Plan), HardwareProfile hardwareProfile = default(HardwareProfile), StorageProfile storageProfile = default(StorageProfile), AdditionalCapabilities additionalCapabilities = default(AdditionalCapabilities), OSProfile osProfile = default(OSProfile), NetworkProfile networkProfile = default(NetworkProfile), SecurityProfile securityProfile = default(SecurityProfile), DiagnosticsProfile diagnosticsProfile = default(DiagnosticsProfile), SubResource availabilitySet = default(SubResource), SubResource virtualMachineScaleSet = default(SubResource), SubResource proximityPlacementGroup = default(SubResource), string priority = default(string), string evictionPolicy = default(string), BillingProfile billingProfile = default(BillingProfile), SubResource host = default(SubResource), SubResource hostGroup = default(SubResource), string provisioningState = default(string), VirtualMachineInstanceView instanceView = default(VirtualMachineInstanceView), string licenseType = default(string), string vmId = default(string), string extensionsTimeBudget = default(string), int? platformFaultDomain = default(int?), IList<VirtualMachineExtension> resources = default(IList<VirtualMachineExtension>), VirtualMachineIdentity identity = default(VirtualMachineIdentity), IList<string> zones = default(IList<string>), ExtendedLocation extendedLocation = default(ExtendedLocation)) | ||
| public VirtualMachine(string location, string id = default(string), string name = default(string), string type = default(string), IDictionary<string, string> tags = default(IDictionary<string, string>), Plan plan = default(Plan), HardwareProfile hardwareProfile = default(HardwareProfile), StorageProfile storageProfile = default(StorageProfile), AdditionalCapabilities additionalCapabilities = default(AdditionalCapabilities), OSProfile osProfile = default(OSProfile), NetworkProfile networkProfile = default(NetworkProfile), SecurityProfile securityProfile = default(SecurityProfile), DiagnosticsProfile diagnosticsProfile = default(DiagnosticsProfile), SubResource availabilitySet = default(SubResource), SubResource virtualMachineScaleSet = default(SubResource), SubResource proximityPlacementGroup = default(SubResource), string priority = default(string), string evictionPolicy = default(string), BillingProfile billingProfile = default(BillingProfile), SubResource host = default(SubResource), SubResource hostGroup = default(SubResource), string provisioningState = default(string), VirtualMachineInstanceView instanceView = default(VirtualMachineInstanceView), string licenseType = default(string), string vmId = default(string), string extensionsTimeBudget = default(string), int? platformFaultDomain = default(int?), ScheduledEventsProfile scheduledEventsProfile = default(ScheduledEventsProfile), IList<VirtualMachineExtension> resources = default(IList<VirtualMachineExtension>), VirtualMachineIdentity identity = default(VirtualMachineIdentity), IList<string> zones = default(IList<string>), ExtendedLocation extendedLocation = default(ExtendedLocation)) |
There was a problem hiding this comment.
Adjust swagger field order to avoid signature change.
There was a problem hiding this comment.
@allenjzhang , we have already done our best to do this, but it is not possible.
@shpa-microsoft , you will need to create a Customization file for this issue.
1 file in the Customization folder for each file in this PR that has a new parameter (not the last parameter) in the method signature.
Each Customization file needs these:
- 1 method with each parameter up to but not including the new parameter.
- 1 method for each parameter that is after the new parameter.
This means 1 new method for each parameter up to the parameter 'resources' NOT including the new ScheduledEvents parameter.
Then 1 new method for each parameter up to 'identity' NOT including ScheduledEvents.
Do this until you reach the last parameter.
|
@Sandido , Adam can you take look this PR as it goes into your feature release branch. Few problems from 2nd hand conversation from Yalin, 1. swagger not from master. 2. new field should adjust order to avoid breaking change 3. misc files in PR. Can you work with @shpa as per your feature branch policies. |
| /// <param name="resources">The virtual machine child extension | ||
| /// resources.</param> | ||
| /// <param name="identity">The identity of the virtual machine, if | ||
| /// configured.</param> | ||
| /// <param name="zones">The virtual machine zones.</param> | ||
| /// <param name="extendedLocation">The extended location of the Virtual | ||
| /// Machine.</param> | ||
| public VirtualMachine(string location, string id = default(string), string name = default(string), string type = default(string), IDictionary<string, string> tags = default(IDictionary<string, string>), Plan plan = default(Plan), HardwareProfile hardwareProfile = default(HardwareProfile), StorageProfile storageProfile = default(StorageProfile), AdditionalCapabilities additionalCapabilities = default(AdditionalCapabilities), OSProfile osProfile = default(OSProfile), NetworkProfile networkProfile = default(NetworkProfile), SecurityProfile securityProfile = default(SecurityProfile), DiagnosticsProfile diagnosticsProfile = default(DiagnosticsProfile), SubResource availabilitySet = default(SubResource), SubResource virtualMachineScaleSet = default(SubResource), SubResource proximityPlacementGroup = default(SubResource), string priority = default(string), string evictionPolicy = default(string), BillingProfile billingProfile = default(BillingProfile), SubResource host = default(SubResource), SubResource hostGroup = default(SubResource), string provisioningState = default(string), VirtualMachineInstanceView instanceView = default(VirtualMachineInstanceView), string licenseType = default(string), string vmId = default(string), string extensionsTimeBudget = default(string), int? platformFaultDomain = default(int?), IList<VirtualMachineExtension> resources = default(IList<VirtualMachineExtension>), VirtualMachineIdentity identity = default(VirtualMachineIdentity), IList<string> zones = default(IList<string>), ExtendedLocation extendedLocation = default(ExtendedLocation)) | ||
| public VirtualMachine(string location, string id = default(string), string name = default(string), string type = default(string), IDictionary<string, string> tags = default(IDictionary<string, string>), Plan plan = default(Plan), HardwareProfile hardwareProfile = default(HardwareProfile), StorageProfile storageProfile = default(StorageProfile), AdditionalCapabilities additionalCapabilities = default(AdditionalCapabilities), OSProfile osProfile = default(OSProfile), NetworkProfile networkProfile = default(NetworkProfile), SecurityProfile securityProfile = default(SecurityProfile), DiagnosticsProfile diagnosticsProfile = default(DiagnosticsProfile), SubResource availabilitySet = default(SubResource), SubResource virtualMachineScaleSet = default(SubResource), SubResource proximityPlacementGroup = default(SubResource), string priority = default(string), string evictionPolicy = default(string), BillingProfile billingProfile = default(BillingProfile), SubResource host = default(SubResource), SubResource hostGroup = default(SubResource), string provisioningState = default(string), VirtualMachineInstanceView instanceView = default(VirtualMachineInstanceView), string licenseType = default(string), string vmId = default(string), string extensionsTimeBudget = default(string), int? platformFaultDomain = default(int?), ScheduledEventsProfile scheduledEventsProfile = default(ScheduledEventsProfile), IList<VirtualMachineExtension> resources = default(IList<VirtualMachineExtension>), VirtualMachineIdentity identity = default(VirtualMachineIdentity), IList<string> zones = default(IList<string>), ExtendedLocation extendedLocation = default(ExtendedLocation)) |
There was a problem hiding this comment.
@allenjzhang , we have already done our best to do this, but it is not possible.
@shpa-microsoft , you will need to create a Customization file for this issue.
1 file in the Customization folder for each file in this PR that has a new parameter (not the last parameter) in the method signature.
Each Customization file needs these:
- 1 method with each parameter up to but not including the new parameter.
- 1 method for each parameter that is after the new parameter.
This means 1 new method for each parameter up to the parameter 'resources' NOT including the new ScheduledEvents parameter.
Then 1 new method for each parameter up to 'identity' NOT including ScheduledEvents.
Do this until you reach the last parameter.
| /// <param name="identity">The identity of the virtual machine, if | ||
| /// configured.</param> | ||
| /// <param name="zones">The virtual machine zones.</param> | ||
| public VirtualMachineUpdate(IDictionary<string, string> tags = default(IDictionary<string, string>), Plan plan = default(Plan), HardwareProfile hardwareProfile = default(HardwareProfile), StorageProfile storageProfile = default(StorageProfile), AdditionalCapabilities additionalCapabilities = default(AdditionalCapabilities), OSProfile osProfile = default(OSProfile), NetworkProfile networkProfile = default(NetworkProfile), SecurityProfile securityProfile = default(SecurityProfile), DiagnosticsProfile diagnosticsProfile = default(DiagnosticsProfile), SubResource availabilitySet = default(SubResource), SubResource virtualMachineScaleSet = default(SubResource), SubResource proximityPlacementGroup = default(SubResource), string priority = default(string), string evictionPolicy = default(string), BillingProfile billingProfile = default(BillingProfile), SubResource host = default(SubResource), SubResource hostGroup = default(SubResource), string provisioningState = default(string), VirtualMachineInstanceView instanceView = default(VirtualMachineInstanceView), string licenseType = default(string), string vmId = default(string), string extensionsTimeBudget = default(string), int? platformFaultDomain = default(int?), VirtualMachineIdentity identity = default(VirtualMachineIdentity), IList<string> zones = default(IList<string>)) | ||
| public VirtualMachineUpdate(IDictionary<string, string> tags = default(IDictionary<string, string>), Plan plan = default(Plan), HardwareProfile hardwareProfile = default(HardwareProfile), StorageProfile storageProfile = default(StorageProfile), AdditionalCapabilities additionalCapabilities = default(AdditionalCapabilities), OSProfile osProfile = default(OSProfile), NetworkProfile networkProfile = default(NetworkProfile), SecurityProfile securityProfile = default(SecurityProfile), DiagnosticsProfile diagnosticsProfile = default(DiagnosticsProfile), SubResource availabilitySet = default(SubResource), SubResource virtualMachineScaleSet = default(SubResource), SubResource proximityPlacementGroup = default(SubResource), string priority = default(string), string evictionPolicy = default(string), BillingProfile billingProfile = default(BillingProfile), SubResource host = default(SubResource), SubResource hostGroup = default(SubResource), string provisioningState = default(string), VirtualMachineInstanceView instanceView = default(VirtualMachineInstanceView), string licenseType = default(string), string vmId = default(string), string extensionsTimeBudget = default(string), int? platformFaultDomain = default(int?), ScheduledEventsProfile scheduledEventsProfile = default(ScheduledEventsProfile), VirtualMachineIdentity identity = default(VirtualMachineIdentity), IList<string> zones = default(IList<string>)) |
@YalinLi0312 , we will handle these changes when we want to merge the Feature Branch. Not in this PR. |
@allenjzhang , I addressed your points. But the SDK is not generated from Master as the swagger has not yet been merged. |
shpa-microsoft
force-pushed
the
feature/shpa/terminateNotifNew
branch
from
b0c61d9
to
a47527f
Compare
All SDK Contribution checklist:
This checklist is used to make sure that common guidelines for a pull request are followed.
Draftmode if it is:General Guidelines and Best Practices
Testing Guidelines
SDK Generation Guidelines
*.csprojandAssemblyInfo.csfiles have been updated with the new version of the SDK. Please double check nuget.org current release version.Additional management plane SDK specific contribution checklist:
Note: Only applies to
Microsoft.Azure.Management.[RP]orAzure.ResourceManager.[RP]Management plane SDK Troubleshooting
If this is very first SDK for a services and you are adding new service folders directly under /SDK, please add
new servicelabel and/or contact assigned reviewer.If the check fails at the
Verify Code Generationstep, please ensure:generate.ps1/cmdto generate this PR instead of callingautorestdirectly.Please pay attention to the @microsoft.csharp version output after running
generate.ps1. If it is lower than current released version (2.3.82), please run it again as it should pull down the latest version.Note: We have recently updated the PSH module called by
generate.ps1to emit additional data. This would help reduce/eliminate the Code Verification check error. Please run following command:Old outstanding PR cleanup
Please note:
If PRs (including draft) has been out for more than 60 days and there are no responses from our query or followups, they will be closed to maintain a concise list for our reviewers.