always use lightmap lightColor restoration, even with lightgrid direc…

…tion, ref #299, #306

The feature discussed in #299 and #306 to restore original light color
to feed the normal-based light computation was only applied on surface
using deluxe maps, leading to anomalous dark lighting with maps without
deluxemaps, or when deluxe mapping is disabled. It's not related to
deluxe maps but to light maps any way

src/engine/renderer/glsl_source/lightMapping_fp.glsl

@@ -118,32 +118,6 @@ void main()
 		// Compute light color from space lightmap.
 		vec3 lightColor = texture2D(u_LightMap, var_TexLight).rgb;
 
-		#if defined(USE_DELUXE_MAPPING)
-			/* Lightmaps generated by q3map2 don't store the raw light value, but
-			they store light premultiplied with the dot product of the light
-			direction and surface normal. The line is just an attempt to reverse
-			that and get the original light values.
-
-			The lightmap stores the light in this way because for the diffuse
-			lighting formula the outgoing light is equal to the incoming light
-			multiplied by the above dot product multiplied by the surface albedo.
-			So this premultiplication means that the diffuse lighting value can
-			be calculated with a single multiply operation.
-
-			But specular lighting and/or normal mapping formulas are more complex,
-			and so you need the true light value to get correct lighting.
-			Obviously the data is not good enough to recover the original color
-			in all cases. The lower bound was an arbitrary chose factor to
-			prevent too small divisors resulting in too bright lights.
-
-			Increasing the value should reduce these artifacts. -- gimhael
-			https://github.com/DaemonEngine/Daemon/issues/299#issuecomment-606186347
-			*/
-
-			// divide by cosine term to restore original light color
-			lightColor /= clamp(dot(normalize(var_Normal), lightDir), 0.3, 1.0);
-		#endif
-
 		color.rgb = vec3(0.0);
 	#else
 		// Compute light color from lightgrid.
@@ -153,6 +127,32 @@ void main()
 		color.rgb = ambientColor * r_AmbientScale * diffuse.rgb;
 	#endif
 
+	#if defined(USE_LIGHT_MAPPING)
+		/* Lightmaps generated by q3map2 don't store the raw light value, but
+		they store light premultiplied with the dot product of the light
+		direction and surface normal. The line is just an attempt to reverse
+		that and get the original light values.
+
+		The lightmap stores the light in this way because for the diffuse
+		lighting formula the outgoing light is equal to the incoming light
+		multiplied by the above dot product multiplied by the surface albedo.
+		So this premultiplication means that the diffuse lighting value can
+		be calculated with a single multiply operation.
+
+		But specular lighting and/or normal mapping formulas are more complex,
+		and so you need the true light value to get correct lighting.
+		Obviously the data is not good enough to recover the original color
+		in all cases. The lower bound was an arbitrary chose factor to
+		prevent too small divisors resulting in too bright lights.
+
+		Increasing the value should reduce these artifacts. -- gimhael
+		https://github.com/DaemonEngine/Daemon/issues/299#issuecomment-606186347
+		*/
+
+		// divide by cosine term to restore original light color
+		lightColor /= clamp(dot(normalize(var_Normal), lightDir), 0.3, 1.0);
+	#endif
+
 	// Blend static light.
 	computeLight(lightDir, normal, viewDir, lightColor, diffuse, material, color);