Merge pull request #3 from DarkZeros/minor_tuning

Update SdkConfig and Readme

README.md

@@ -1,55 +1,3 @@
 # WatchyOS
-Lightweight Watchy OS system built with ESP-IDF and Arduino component
-
-# Hello World Example
-
-Starts a FreeRTOS task to print "Hello World".
-
-(See the README.md file in the upper level 'examples' directory for more information about examples.)
-
-## How to use example
-
-Follow detailed instructions provided specifically for this example. 
-
-Select the instructions depending on Espressif chip installed on your development board:
-
-- [ESP32 Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/stable/get-started/index.html)
-- [ESP32-S2 Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/get-started/index.html)
-
-
-## Example folder contents
-
-The project **hello_world** contains one source file in C language [hello_world_main.c](main/hello_world_main.c). The file is located in folder [main](main).
 
-ESP-IDF projects are built using CMake. The project build configuration is contained in `CMakeLists.txt` files that provide set of directives and instructions describing the project's source files and targets (executable, library, or both). 
-
-Below is short explanation of remaining files in the project folder.
-
-```
-├── CMakeLists.txt
-├── example_test.py            Python script used for automated example testing
-├── main
-│   ├── CMakeLists.txt
-│   ├── component.mk           Component make file
-│   └── hello_world_main.c
-├── Makefile                   Makefile used by legacy GNU Make
-└── README.md                  This is the file you are currently reading
-```
-
-For more information on structure and contents of ESP-IDF projects, please refer to Section [Build System](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/build-system.html) of the ESP-IDF Programming Guide.
-
-## Troubleshooting
-
-* Program upload failure
-
-    * Hardware connection is not correct: run `idf.py -p PORT monitor`, and reboot your board to see if there are any output logs.
-    * The baud rate for downloading is too high: lower your baud rate in the `menuconfig` menu, and try again.
-
-## Technical support and feedback
-
-Please use the following feedback channels:
-
-* For technical queries, go to the [esp32.com](https://esp32.com/) forum
-* For a feature request or bug report, create a [GitHub issue](https://github.com/espressif/esp-idf/issues)
-
-We will get back to you as soon as possible.
+Lightweight Watchy OS system built with ESP-IDF and Arduino component

sdkconfig

@@ -39,17 +39,17 @@ CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
 # Bootloader config
 #
 CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000
-CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
+# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE is not set
 # CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set
-# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set
+CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF=y
 # CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set
 # CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set
+CONFIG_BOOTLOADER_LOG_LEVEL_ERROR=y
 # CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set
-CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y
+# CONFIG_BOOTLOADER_LOG_LEVEL_INFO is not set
 # CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set
 # CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set
-CONFIG_BOOTLOADER_LOG_LEVEL=3
+CONFIG_BOOTLOADER_LOG_LEVEL=1
 # CONFIG_BOOTLOADER_SPI_CUSTOM_WP_PIN is not set
 CONFIG_BOOTLOADER_SPI_WP_PIN=7
 # CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V is not set
@@ -108,13 +108,13 @@ CONFIG_ESPTOOLPY_AFTER="hard_reset"
 # CONFIG_ESPTOOLPY_MONITOR_BAUD_CONSOLE is not set
 # CONFIG_ESPTOOLPY_MONITOR_BAUD_9600B is not set
 # CONFIG_ESPTOOLPY_MONITOR_BAUD_57600B is not set
-# CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B is not set
-CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B=y
+CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
+# CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B is not set
 # CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B is not set
 # CONFIG_ESPTOOLPY_MONITOR_BAUD_2MB is not set
 # CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER is not set
 CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=115200
-CONFIG_ESPTOOLPY_MONITOR_BAUD=230400
+CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
 # end of Serial flasher config
 
 #
@@ -126,7 +126,7 @@ CONFIG_ESPTOOLPY_MONITOR_BAUD=230400
 CONFIG_PARTITION_TABLE_CUSTOM=y
 CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
 CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"
-CONFIG_PARTITION_TABLE_OFFSET=0x10000
+CONFIG_PARTITION_TABLE_OFFSET=0x8000
 CONFIG_PARTITION_TABLE_MD5=y
 # end of Partition Table
 
@@ -141,14 +141,14 @@ CONFIG_ARDUINO_RUN_CORE1=y
 CONFIG_ARDUINO_RUNNING_CORE=1
 CONFIG_ARDUINO_LOOP_STACK_SIZE=8192
 # CONFIG_ARDUINO_EVENT_RUN_CORE0 is not set
-CONFIG_ARDUINO_EVENT_RUN_CORE1=y
-# CONFIG_ARDUINO_EVENT_RUN_NO_AFFINITY is not set
-CONFIG_ARDUINO_EVENT_RUNNING_CORE=1
+# CONFIG_ARDUINO_EVENT_RUN_CORE1 is not set
+CONFIG_ARDUINO_EVENT_RUN_NO_AFFINITY=y
+CONFIG_ARDUINO_EVENT_RUNNING_CORE=-1
 # CONFIG_ARDUINO_UDP_RUN_CORE0 is not set
-CONFIG_ARDUINO_UDP_RUN_CORE1=y
-# CONFIG_ARDUINO_UDP_RUN_NO_AFFINITY is not set
+# CONFIG_ARDUINO_UDP_RUN_CORE1 is not set
+CONFIG_ARDUINO_UDP_RUN_NO_AFFINITY=y
 CONFIG_ARDUINO_UDP_TASK_PRIORITY=3
-CONFIG_ARDUINO_UDP_RUNNING_CORE=1
+CONFIG_ARDUINO_UDP_RUNNING_CORE=-1
 CONFIG_ARDUINO_ISR_IRAM=y
 # CONFIG_DISABLE_HAL_LOCKS is not set
 
@@ -180,8 +180,8 @@ CONFIG_ARDUHAL_PARTITION_SCHEME="min_spiffs"
 # Compiler options
 #
 # CONFIG_COMPILER_OPTIMIZATION_DEFAULT is not set
-CONFIG_COMPILER_OPTIMIZATION_SIZE=y
-# CONFIG_COMPILER_OPTIMIZATION_PERF is not set
+# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set
+CONFIG_COMPILER_OPTIMIZATION_PERF=y
 # CONFIG_COMPILER_OPTIMIZATION_NONE is not set
 # CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE is not set
 CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT=y
@@ -847,16 +847,18 @@ CONFIG_HEAP_TRACING_OFF=y
 # Log output
 #
 # CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
-# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set
+CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
 # CONFIG_LOG_DEFAULT_LEVEL_WARN is not set
-CONFIG_LOG_DEFAULT_LEVEL_INFO=y
+# CONFIG_LOG_DEFAULT_LEVEL_INFO is not set
 # CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
 # CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
-CONFIG_LOG_DEFAULT_LEVEL=3
+CONFIG_LOG_DEFAULT_LEVEL=1
 CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y
+# CONFIG_LOG_MAXIMUM_LEVEL_WARN is not set
+# CONFIG_LOG_MAXIMUM_LEVEL_INFO is not set
 # CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set
 # CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set
-CONFIG_LOG_MAXIMUM_LEVEL=3
+CONFIG_LOG_MAXIMUM_LEVEL=1
 CONFIG_LOG_COLORS=y
 CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
 # CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set
@@ -1352,12 +1354,12 @@ CONFIG_WPA_MBEDTLS_CRYPTO=y
 # Deprecated options for backward compatibility
 CONFIG_TOOLPREFIX="xtensa-esp32-elf-"
 # CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
-# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
+CONFIG_LOG_BOOTLOADER_LEVEL_ERROR=y
 # CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
-CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
+# CONFIG_LOG_BOOTLOADER_LEVEL_INFO is not set
 # CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
 # CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
-CONFIG_LOG_BOOTLOADER_LEVEL=3
+CONFIG_LOG_BOOTLOADER_LEVEL=1
 # CONFIG_APP_ROLLBACK_ENABLE is not set
 # CONFIG_FLASH_ENCRYPTION_ENABLED is not set
 CONFIG_FLASHMODE_QIO=y
@@ -1366,15 +1368,15 @@ CONFIG_FLASHMODE_QIO=y
 # CONFIG_FLASHMODE_DOUT is not set
 # CONFIG_MONITOR_BAUD_9600B is not set
 # CONFIG_MONITOR_BAUD_57600B is not set
-# CONFIG_MONITOR_BAUD_115200B is not set
-CONFIG_MONITOR_BAUD_230400B=y
+CONFIG_MONITOR_BAUD_115200B=y
+# CONFIG_MONITOR_BAUD_230400B is not set
 # CONFIG_MONITOR_BAUD_921600B is not set
 # CONFIG_MONITOR_BAUD_2MB is not set
 # CONFIG_MONITOR_BAUD_OTHER is not set
 CONFIG_MONITOR_BAUD_OTHER_VAL=115200
-CONFIG_MONITOR_BAUD=230400
+CONFIG_MONITOR_BAUD=115200
 # CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG is not set
-CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE=y
+# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set
 # CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED is not set
 CONFIG_OPTIMIZATION_ASSERTIONS_SILENT=y
 # CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set