🎨 Arduino IDE pins comments, generate version

Djonker83 · Oct 20, 2024 · fc769ef · fc769ef
1 parent 9192ae5
commit fc769ef
Show file tree

Hide file tree

Showing 16 changed files with 95 additions and 264 deletions.
diff --git a/Marlin/Version.h b/Marlin/Version.h
@@ -43,6 +43,13 @@
  */
 //#define STRING_DISTRIBUTION_DATE "2024-10-20"
 
+/**
+ * The protocol for communication to the host. Protocol indicates communication
+ * standards such as the use of ASCII, "echo:" and "error:" line prefixes, etc.
+ * (Other behaviors are given by the firmware version and capabilities report.)
+ */
+//#define PROTOCOL_VERSION "1.0"
+
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.
  */
@@ -68,8 +75,8 @@
 //#define WEBSITE_URL "marlinfw.org"
 
 /**
- * Set the vendor info the serial USB interface, if changable
- * Currently only supported by DUE platform
+ * Set the vendor info the serial USB interface, if changeable.
+ * Currently only supported by DUE platform.
  */
 //#define USB_DEVICE_VENDOR_ID           0x0000
 //#define USB_DEVICE_PRODUCT_ID          0x0000

diff --git a/Marlin/src/inc/Version.h b/Marlin/src/inc/Version.h
@@ -101,8 +101,8 @@
 #endif
 
 /**
- * Set the vendor info the serial USB interface, if changable
- * Currently only supported by DUE platform
+ * Set the vendor info the serial USB interface, if changeable.
+ * Currently only supported by DUE platform.
  */
 #ifndef USB_DEVICE_VENDOR_ID
   #define USB_DEVICE_VENDOR_ID            0x03EB /* ATMEL VID */

diff --git a/Marlin/src/pins/sanguino/pins_ANET_10.h b/Marlin/src/pins/sanguino/pins_ANET_10.h
@@ -51,20 +51,14 @@
  */
 
 /**
- * Another usable Arduino IDE extension (Boards Manager) can be found at
+ * Requires this Arduino IDE extension for Boards Manager:
  * https://github.com/Lauszus/Sanguino
  *
- * This extension has been tested on Arduino 1.6.12 & 1.8.0
- *
- * Here's the JSON path:
+ * Follow the installation instructions at https://learn.sparkfun.com/pages/CustomBoardsArduino
+ * Just use this JSON URL instead of Sparkfun's:
  * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
  *
- * When installing select 1.0.2
- *
- * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
- * Just use the above JSON URL instead of Sparkfun's JSON.
- *
- * Once installed select the Sanguino board and then select the CPU.
+ * Once installed select the SANGUINO board and then select the CPU.
  */
 
 /**

diff --git a/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h b/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h
@@ -27,26 +27,14 @@
  */
 
 /**
- * Rev B    26 DEC 2016
- *
- * added pointer to a current Arduino IDE extension
- */
-
-/**
- * A useable Arduino IDE extension (Boards Manager) can be found at
+ * Requires this Arduino IDE extension for Boards Manager:
  * https://github.com/Lauszus/Sanguino
  *
- * This extension has been tested on Arduino 1.6.12 & 1.8.0
- *
- * Here's the JSON path:
+ * Follow the installation instructions at https://learn.sparkfun.com/pages/CustomBoardsArduino
+ * Just use this JSON URL instead of Sparkfun's:
  * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
  *
- * When installing select 1.0.2
- *
- * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
- * Just use the above JSON URL instead of Sparkfun's JSON.
- *
- * Once installed select the Sanguino board and then select the CPU.
+ * Once installed select the SANGUINO board and then select the CPU.
  */
 
 #define REQUIRE_MEGA644P

diff --git a/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h b/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h
@@ -26,25 +26,13 @@
  */
 
 /**
- * Rev B    26 DEC 2016
- *
- * added pointer to a current Arduino IDE extension
- */
-
-/**
- * A useable Arduino IDE extension (Boards Manager) can be found at
+ * Requires this Arduino IDE extension for Boards Manager:
  * https://github.com/Lauszus/Sanguino
  *
- * This extension has been tested on Arduino 1.6.12 & 1.8.0
- *
- * Here's the JSON path:
+ * Follow the installation instructions at https://learn.sparkfun.com/pages/CustomBoardsArduino
+ * Just use this JSON URL instead of Sparkfun's:
  * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
  *
- * When installing select 1.0.2
- *
- * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
- * Just use the above JSON URL instead of Sparkfun's JSON.
- *
  * Once installed select the SANGUINO board and then select the CPU.
  */
 

diff --git a/Marlin/src/pins/sanguino/pins_GEN6.h b/Marlin/src/pins/sanguino/pins_GEN6.h
@@ -26,29 +26,15 @@
  * Schematic: https://reprap.org/mediawiki/images/0/0f/GEN6_Mendel_Circuit.pdf
  */
 
- /**
- * Rev B    26 DEC 2016
- *
- * 1) added pointer to a current Arduino IDE extension
- * 2) added support for M3, M4 & M5 spindle control commands
- * 3) added case light pin definition
- */
-
 /**
- * A useable Arduino IDE extension (Boards Manager) can be found at
+ * Requires this Arduino IDE extension for Boards Manager:
  * https://github.com/Lauszus/Sanguino
  *
- * This extension has been tested on Arduino 1.6.12 & 1.8.0
- *
- * Here's the JSON path:
+ * Follow the installation instructions at https://learn.sparkfun.com/pages/CustomBoardsArduino
+ * Just use this JSON URL instead of Sparkfun's:
  * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
  *
- * When installing select 1.0.2
- *
- * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
- * Just use the above JSON URL instead of Sparkfun's JSON.
- *
- * Once installed select the Sanguino board and then select the CPU.
+ * Once installed select the SANGUINO board and then select the CPU.
  */
 
 #define ALLOW_MEGA644P

diff --git a/Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h b/Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h
@@ -26,25 +26,13 @@
  */
 
 /**
- * Rev B    26 DEC 2016
- *
- * added pointer to a current Arduino IDE extension
- */
-
-/**
- * A useable Arduino IDE extension (Boards Manager) can be found at
+ * Requires this Arduino IDE extension for Boards Manager:
  * https://github.com/Lauszus/Sanguino
  *
- * This extension has been tested on Arduino 1.6.12 & 1.8.0
- *
- * Here's the JSON path:
+ * Follow the installation instructions at https://learn.sparkfun.com/pages/CustomBoardsArduino
+ * Just use this JSON URL instead of Sparkfun's:
  * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
  *
- * When installing select 1.0.2
- *
- * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
- * Just use the above JSON URL instead of Sparkfun's JSON.
- *
  * Once installed select the SANGUINO board and then select the CPU.
  */
 

diff --git a/Marlin/src/pins/sanguino/pins_GEN7_12.h b/Marlin/src/pins/sanguino/pins_GEN7_12.h
@@ -29,29 +29,15 @@
  * Schematic (1.3.1): https://github.com/Traumflug/Generation_7_Electronics/blob/release-1.3.1/release%20documents/Gen7Board%20Schematic.pdf
  */
 
- /**
- * Rev B    26 DEC 2016
- *
- * 1) added pointer to a current Arduino IDE extension
- * 2) added support for M3, M4 & M5 spindle control commands
- * 3) added case light pin definition
- */
-
 /**
- * A useable Arduino IDE extension (Boards Manager) can be found at
+ * Requires this Arduino IDE extension for Boards Manager:
  * https://github.com/Lauszus/Sanguino
  *
- * This extension has been tested on Arduino 1.6.12 & 1.8.0
- *
- * Here's the JSON path:
+ * Follow the installation instructions at https://learn.sparkfun.com/pages/CustomBoardsArduino
+ * Just use this JSON URL instead of Sparkfun's:
  * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
  *
- * When installing select 1.0.2
- *
- * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
- * Just use the above JSON URL instead of Sparkfun's JSON.
- *
- * Once installed select the Sanguino board and then select the CPU.
+ * Once installed select the SANGUINO board and then select the CPU.
  */
 
 #define ALLOW_MEGA644

diff --git a/Marlin/src/pins/sanguino/pins_GEN7_13.h b/Marlin/src/pins/sanguino/pins_GEN7_13.h
@@ -26,26 +26,14 @@
  */
 
 /**
- * Rev B    26 DEC 2016
- *
- * added pointer to a current Arduino IDE extension
- */
-
-/**
- * A useable Arduino IDE extension (Boards Manager) can be found at
+ * Requires this Arduino IDE extension for Boards Manager:
  * https://github.com/Lauszus/Sanguino
  *
- * This extension has been tested on Arduino 1.6.12 & 1.8.0
- *
- * Here's the JSON path:
+ * Follow the installation instructions at https://learn.sparkfun.com/pages/CustomBoardsArduino
+ * Just use this JSON URL instead of Sparkfun's:
  * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
  *
- * When installing select 1.0.2
- *
- * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
- * Just use the above JSON URL instead of Sparkfun's JSON.
- *
- * Once installed select the Sanguino board and then select the CPU.
+ * Once installed select the SANGUINO board and then select the CPU.
  */
 
 #define BOARD_INFO_NAME "Gen7 v1.3"

diff --git a/Marlin/src/pins/sanguino/pins_GEN7_14.h b/Marlin/src/pins/sanguino/pins_GEN7_14.h
@@ -28,28 +28,14 @@
  */
 
 /**
- * Rev B    26 DEC 2016
- *
- * 1) added pointer to a current Arduino IDE extension
- * 2) added support for M3, M4 & M5 spindle control commands
- * 3) added case light pin definition
- */
-
-/**
- * A useable Arduino IDE extension (Boards Manager) can be found at
+ * Requires this Arduino IDE extension for Boards Manager:
  * https://github.com/Lauszus/Sanguino
  *
- * This extension has been tested on Arduino 1.6.12 & 1.8.0
- *
- * Here's the JSON path:
+ * Follow the installation instructions at https://learn.sparkfun.com/pages/CustomBoardsArduino
+ * Just use this JSON URL instead of Sparkfun's:
  * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
  *
- * When installing select 1.0.2
- *
- * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
- * Just use the above JSON URL instead of Sparkfun's JSON.
- *
- * Once installed select the Sanguino board and then select the CPU.
+ * Once installed select the SANGUINO board and then select the CPU.
  */
 
 #define ALLOW_MEGA644

diff --git a/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h b/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h
@@ -29,28 +29,14 @@
  */
 
 /**
- * Rev B    26 DEC 2016
- *
- * 1) added pointer to a current Arduino IDE extension
- * 2) added support for M3, M4 & M5 spindle control commands
- * 3) added case light pin definition
- */
-
-/**
- * A useable Arduino IDE extension (Boards Manager) can be found at
+ * Requires this Arduino IDE extension for Boards Manager:
  * https://github.com/Lauszus/Sanguino
  *
- * This extension has been tested on Arduino 1.6.12 & 1.8.0
- *
- * Here's the JSON path:
+ * Follow the installation instructions at https://learn.sparkfun.com/pages/CustomBoardsArduino
+ * Just use this JSON URL instead of Sparkfun's:
  * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
  *
- * When installing select 1.0.2
- *
- * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
- * Just use the above JSON URL instead of Sparkfun's JSON.
- *
- * Once installed select the Sanguino board and then select the CPU.
+ * Once installed select the SANGUINO board and then select the CPU.
  */
 
 #define ALLOW_MEGA644

diff --git a/Marlin/src/pins/sanguino/pins_OMCA.h b/Marlin/src/pins/sanguino/pins_OMCA.h
@@ -53,26 +53,14 @@
  */
 
 /**
- * Rev B    26 DEC 2016
- *
- * added pointer to a current Arduino IDE extension
- */
-
-/**
- * A useable Arduino IDE extension (Boards Manager) can be found at
+ * Requires this Arduino IDE extension for Boards Manager:
  * https://github.com/Lauszus/Sanguino
  *
- * This extension has been tested on Arduino 1.6.12 & 1.8.0
- *
- * Here's the JSON path:
+ * Follow the installation instructions at https://learn.sparkfun.com/pages/CustomBoardsArduino
+ * Just use this JSON URL instead of Sparkfun's:
  * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
  *
- * When installing select 1.0.2
- *
- * Installation instructions can be found at https://learn.sparkfun.com:443/pages/CustomBoardsArduino
- * Just use the above JSON URL instead of Sparkfun's JSON.
- *
- * Once installed select the Sanguino board and then select the CPU.
+ * Once installed select the SANGUINO board and then select the CPU.
  */
 
 #if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega644__)

diff --git a/Marlin/src/pins/sanguino/pins_OMCA_A.h b/Marlin/src/pins/sanguino/pins_OMCA_A.h
@@ -51,26 +51,14 @@
  */
 
 /**
- * Rev B    26 DEC 2016
- *
- * added pointer to a current Arduino IDE extension
- */
-
-/**
- * A useable Arduino IDE extension (Boards Manager) can be found at
+ * Requires this Arduino IDE extension for Boards Manager:
  * https://github.com/Lauszus/Sanguino
  *
- * This extension has been tested on Arduino 1.6.12 & 1.8.0
- *
- * Here's the JSON path:
+ * Follow the installation instructions at https://learn.sparkfun.com/pages/CustomBoardsArduino
+ * Just use this JSON URL instead of Sparkfun's:
  * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
  *
- * When installing select 1.0.2
- *
- * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
- * Just use the above JSON URL instead of Sparkfun's JSON.
- *
- * Once installed select the Sanguino board and then select the CPU.
+ * Once installed select the SANGUINO board and then select the CPU.
  */
 
 #if NOT_TARGET(__AVR_ATmega644__)