Skip to content
/ pa-spl Public

A no_std embedded-hal Rust driver for the PCB Artists I2C SPL Meter module.

License

Apache-2.0, MIT licenses found

Licenses found

Apache-2.0
LICENSE-APACHE
MIT
LICENSE-MIT
Notifications You must be signed in to change notification settings

EngJay/pa-spl

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Embedded HAL Driver for PCB Artists I2C SPL Module

Build Status

A Rust no_std embedded-hal driver for the PCB Artists I2C Sound Level module.

Features

  • Read current SPL value averaged over a time window (TAVG register) with a range of 35 dB to 120 dB (+/-2 dB) from 30 Hz to 8 kHz.
  • Adjustable time window (TAVG register) for averaging of SPL value from 10 ms to 10,000 ms.
  • Read min/max SPL value sensed between power cycle or reset.

Usage

This example uses the SPL module with a STM32F3 Discovery development board and a USB-TTL converter.

See the example project for the complete example.

Click to show Cargo.toml.

[package]
name = "example-read-decibel-value"
description = "Example of reading SPL with the pa-spl driver, PCB Artists SPL module, and STM32F3 Discovery"
authors = ["Jason Scott <>"]
edition = "2021"
publish = false
readme = "README.md"
version = "0.1.0"

[dependencies]
cortex-m = "0.7.7"
cortex-m-rt = "0.7.3"
cortex-m-semihosting = "0.5.0"
panic-halt = "0.2.0"
stm32f3xx-hal = { version = "0.10.0", features = ["ld", "rt", "stm32f303xc"] }
pa-spl = "0.1.0"

[[bin]]
name = "example-read-decibel-value"
test = false
bench = false

[profile.release]
codegen-units = 1
debug = true
lto = true
// Reads the latest decibel value and prints it to UART4.

#![no_main]
#![no_std]

use cortex_m::asm;
use cortex_m_rt::entry;

// Use halt as the panicking behavior.
//
// A breakpoint can be set on `rust_begin_unwind` to catch panics.
//
use pa_spl::PaSpl;
use panic_halt as _;
use stm32f3xx_hal::{delay::Delay, i2c::I2c, pac, prelude::*, serial::config, serial::Serial};

use core::fmt::Write;

// Provide an implementation of a buffer writer in order to use the write!
// macro.
//
struct BufWriter<'a> {
    buf: &'a mut [u8],
    pos: usize,
}

impl<'a> BufWriter<'a> {
    pub fn new(buf: &'a mut [u8]) -> Self {
        BufWriter { buf, pos: 0 }
    }

    pub fn as_str(&self) -> &str {
        core::str::from_utf8(&self.buf[..self.pos]).unwrap()
    }

    pub fn reset(&mut self) {
        self.pos = 0;
        self.buf.fill(0);
    }
}

// Provide implementation of write_str in order to use the buffer writer with
// the write! formatting macro.
//
impl<'a> core::fmt::Write for BufWriter<'a> {
    fn write_str(&mut self, s: &str) -> core::fmt::Result {
        let bytes = s.as_bytes();
        let len = bytes.len();

        if self.pos + len > self.buf.len() {
            return Err(core::fmt::Error);
        }

        self.buf[self.pos..self.pos + len].copy_from_slice(bytes);
        self.pos += len;
        Ok(())
    }
}

#[entry]
fn main() -> ! {
    // Get peripherals.
    //
    // take() returns an Option, which requires handling the possibility of the
    // return of an Err or None instead of the desired value, which is of type
    // pac::Peripherals in this case.
    //
    // Since this is an embedded application, it's not as simple as writing to
    // stdout. This is a minimal example, so we'll drop into an inifinite loop
    // to allow a debugger to find the failure.
    //
    let device_periphs = pac::Peripherals::take().unwrap_or_else(|| {
        loop {
            // Failed to take cortex_m::Peripherals.
            asm::nop(); // If real app, replace with actual error handling.
        }
    });

    // Get RCC peripheral and configure clocks.
    //
    // The constrain() method is used here to provide a higher-level abstraction
    // of the peripheral rather than raw register access. The method consumes
    // the raw peripheral and returns an instance of the RCC peripheral with
    // higher-level safe abstractions provided by the HAL, which is of type Rcc,
    // while setting the system clock frequency.
    //
    let mut rcc = device_periphs.RCC.constrain();
    let mut flash = device_periphs.FLASH.constrain();
    let clocks = rcc.cfgr.sysclk(48.MHz()).freeze(&mut flash.acr);

    // Set up delay capability.
    //
    // Use the same unwrap method to get the core periphs, then
    // create a delay abstraction using SysTick (SYST).
    //
    let core_periphs = cortex_m::Peripherals::take().unwrap_or_else(|| {
        loop {
            // Failed to take cortex_m::Peripherals.
            asm::nop(); // If real app, replace with actual error handling.
        }
    });
    let mut delay = Delay::new(core_periphs.SYST, clocks);

    // Get GPIO Ports B and C.
    //
    // The split method here splits out the functionality of the GPIO Port B/C
    // while taking a mutable borrow of an "enabler" that enables the clock for
    // the port at the same time. The mutable borrow allows modification of the
    // borrowed value while ensuring exclusive access.
    //
    let mut gpiob = device_periphs.GPIOB.split(&mut rcc.ahb);
    let mut gpioc = device_periphs.GPIOC.split(&mut rcc.ahb);

    // Configure pins PB6 as SCL and PB7 as SDA for I2C1.
    //
    let mut scl =
        gpiob
            .pb6
            .into_af_open_drain(&mut gpiob.moder, &mut gpiob.otyper, &mut gpiob.afrl);
    let mut sda =
        gpiob
            .pb7
            .into_af_open_drain(&mut gpiob.moder, &mut gpiob.otyper, &mut gpiob.afrl);
    scl.internal_pull_up(&mut gpiob.pupdr, true);
    sda.internal_pull_up(&mut gpiob.pupdr, true);

    // Create an instance of I2C1 with the pins.
    //
    let i2c = I2c::new(
        device_periphs.I2C1,
        (scl, sda),
        100.kHz().try_into().unwrap(),
        clocks,
        &mut rcc.apb1,
    );

    // Configure GPIO pins PC10 as TX and PC11 as RX for UART4.
    //
    let tx_pin = gpioc
        .pc10
        .into_af_push_pull(&mut gpioc.moder, &mut gpioc.otyper, &mut gpioc.afrh);
    let rx_pin = gpioc
        .pc11
        .into_af_push_pull(&mut gpioc.moder, &mut gpioc.otyper, &mut gpioc.afrh);

    // Create an instance of UART4 with the pins.
    //
    let mut uart4 = Serial::new(
        device_periphs.UART4,
        (tx_pin, rx_pin),
        config::Config::default().baudrate(115_200.Bd()),
        clocks,
        &mut rcc.apb1,
    );

    // Use the I2C1 instance to create an instance of PaSpl.
    //
    let mut pa_spl = PaSpl::new(i2c);

    // Create a buffer able to be converted to a string.
    // 
    let mut buffer: [u8; 8] = [0; 8];
    let mut buf_writer = BufWriter::new(&mut buffer);

    // Algo delay in milliseconds.
    //
    const ALGO_DELAY_MS: u16 = 500;

    loop {
        // Reset the buffer at the start of each iteration
        //
        buf_writer.reset();

        // Get SPL value from the sensor.
        //
        let spl = pa_spl.get_latest_decibel().unwrap();

        // Format string with SPL value, then covert to string.
        //
        write!(buf_writer, "SPL: {}\r", spl).unwrap();
        let spl_str = buf_writer.as_str();

        // Write the string out to the UART.
        //
        uart4.write_str(spl_str).unwrap_or_else(|_| {
            loop {
                // Failed to write to UART4.
                asm::nop(); // If real app, replace with actual error handling.
            }
        });

        // Limit algorithm to (1000 * (1 / UART_WRITE_DELAY_MS)) Hz.
        //
        delay.delay_ms(ALGO_DELAY_MS);
    }
}

Tests

Two test suites are included - an off-target unit test suite included in the source of the driver that uses embedded-hal-mock and a hardware-in-the-loop (HIL) test suite that is included as a nested cargo project following the pattern described by Ferrous Systems for testing a driver crate.

To run the off-target tests:

cargo test

The HIL testing project is in the target-tests directory and is configured to use probe-rs to automatically build the tests, flash the target, run the tests, and report results.

To run the HIL tests, connect the hardware according to the STM32F3 Discovery example provided in the repo (minus the TTL-USB converter) with a spectrum analysis version of the PCB Artists sensor, firmware version 0x32 or 0x33 (the number read from the VERSION register), then:

cd target-tests
cargo test

The CI configuration runs the tests for every commit and PR against Rust 1.65, stable, beta, and nightly. The HIL tests are run privately due to the security issues with attaching a local GitHub Actions runner to a public respository but anyone is welcome to run them locally on their own hardware.

Minimum Supported Rust Version (MSRV)

This crate is guaranteed to compile on stable Rust 1.65 and up. It might compile with older versions but that may change in any new patch release.

See here for details on how the MSRV may be upgraded.

Minimum Supported Embedded HAL Version

TL;DR: This initial release only supports embedded-hal 0.2 and support for the 1.0 version will be added in a subsequent release.

This crate depends on the embedded-hal crate as it is a driver for use with embedded-hal. Embedded versioning typically moves significantly slower than mainstream, so numerous crates in the repository still depend on the 0.2 version of embedded-hal rather than the recent 1.0 release. Due to this, the minimum supported embedded-hal version of this crate is 0.2 and the 1.0 version is not yet supported in this initial release. Support for the 1.0 version of embedded-hal will be added in a subsequent release.

Glossary

  • API: Application Programming Interface.
  • HAL: Hardware Abstraction Layer.
  • PCB: Printed Circuit Board.
  • I2C: Inter-Intergrated Circuit protocol.
  • SPL: Sound Pressure Level.

License

Licensed under either of Apache License, Version 2.0 or MIT license at your option.
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in pa-spl by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.

About

A no_std embedded-hal Rust driver for the PCB Artists I2C SPL Meter module.

Topics

Resources

License

Apache-2.0, MIT licenses found

Licenses found

Apache-2.0
LICENSE-APACHE
MIT
LICENSE-MIT

Stars

Watchers

Forks

Languages