chore: config timeout and connection pool (#150)

* chore: config timeout and connection pool

* chore: revert unnecessary comment changes

config/config.go

@@ -340,6 +340,30 @@ type RPCConfig struct {
 	// 1024 - 40 - 10 - 50 = 924 = ~900
 	MaxOpenConnections int `mapstructure:"max_open_connections"`
 
+	// mirrors http.Server#ReadTimeout
+	// ReadTimeout is the maximum duration for reading the entire
+	// request, including the body.
+	//
+	// Because ReadTimeout does not let Handlers make per-request
+	// decisions on each request body's acceptable deadline or
+	// upload rate, most users will prefer to use
+	// ReadHeaderTimeout. It is valid to use them both.
+	ReadTimeout time.Duration `mapstructure:"read_timeout"`
+
+	// mirrors http.Server#WriteTimeout
+	// WriteTimeout is the maximum duration before timing out
+	// writes of the response. It is reset whenever a new
+	// request's header is read. Like ReadTimeout, it does not
+	// let Handlers make decisions on a per-request basis.
+	WriteTimeout time.Duration `mapstructure:"write_timeout"`
+
+	// mirrors http.Server#IdleTimeout
+	// IdleTimeout is the maximum amount of time to wait for the
+	// next request when keep-alives are enabled. If IdleTimeout
+	// is zero, the value of ReadTimeout is used. If both are
+	// zero, there is no timeout.
+	IdleTimeout time.Duration `mapstructure:"idle_timeout"`
+
 	// Maximum number of unique clientIDs that can /subscribe
 	// If you're using /broadcast_tx_commit, set to the estimated maximum number
 	// of broadcast_tx_commit calls per block.
@@ -351,7 +375,7 @@ type RPCConfig struct {
 	MaxSubscriptionsPerClient int `mapstructure:"max_subscriptions_per_client"`
 
 	// How long to wait for a tx to be committed during /broadcast_tx_commit
-	// WARNING: Using a value larger than 10s will result in increasing the
+	// WARNING: Using a value larger than 'WriteTimeout' will result in increasing the
 	// global HTTP write timeout, which applies to all connections and endpoints.
 	// See https://github.com/tendermint/tendermint/issues/3435
 	TimeoutBroadcastTxCommit time.Duration `mapstructure:"timeout_broadcast_tx_commit"`
@@ -393,6 +417,9 @@ func DefaultRPCConfig() *RPCConfig {
 
 		Unsafe:             false,
 		MaxOpenConnections: 900,
+		ReadTimeout:        10 * time.Second,
+		WriteTimeout:       10 * time.Second,
+		IdleTimeout:        60 * time.Second,
 
 		MaxSubscriptionClients:    100,
 		MaxSubscriptionsPerClient: 5,
@@ -424,6 +451,15 @@ func (cfg *RPCConfig) ValidateBasic() error {
 	if cfg.MaxOpenConnections < 0 {
 		return errors.New("max_open_connections can't be negative")
 	}
+	if cfg.ReadTimeout < 0 {
+		return errors.New("read_timeout can't be negative")
+	}
+	if cfg.WriteTimeout < 0 {
+		return errors.New("write_timeout can't be negative")
+	}
+	if cfg.IdleTimeout < 0 {
+		return errors.New("idle_timeout can't be negative")
+	}
 	if cfg.MaxSubscriptionClients < 0 {
 		return errors.New("max_subscription_clients can't be negative")
 	}

config/toml.go

@@ -185,6 +185,29 @@ unsafe = {{ .RPC.Unsafe }}
 # 1024 - 40 - 10 - 50 = 924 = ~900
 max_open_connections = {{ .RPC.MaxOpenConnections }}
 
+# mirrors http.Server#ReadTimeout
+# ReadTimeout is the maximum duration for reading the entire
+# request, including the body.
+# Because ReadTimeout does not let Handlers make per-request
+# decisions on each request body's acceptable deadline or
+# upload rate, most users will prefer to use
+# ReadHeaderTimeout. It is valid to use them both.
+read_timeout = "{{ .RPC.ReadTimeout }}"
+
+# mirrors http.Server#WriteTimeout
+# WriteTimeout is the maximum duration before timing out
+# writes of the response. It is reset whenever a new
+# request's header is read. Like ReadTimeout, it does not
+# let Handlers make decisions on a per-request basis.
+write_timeout = "{{ .RPC.WriteTimeout }}"
+
+# mirrors http.Server#IdleTimeout
+# IdleTimeout is the maximum amount of time to wait for the
+# next request when keep-alives are enabled. If IdleTimeout
+# is zero, the value of ReadTimeout is used. If both are
+# zero, there is no timeout.
+idle_timeout = "{{ .RPC.IdleTimeout }}"
+
 # Maximum number of unique clientIDs that can /subscribe
 # If you're using /broadcast_tx_commit, set to the estimated maximum number
 # of broadcast_tx_commit calls per block.
@@ -196,7 +219,7 @@ max_subscription_clients = {{ .RPC.MaxSubscriptionClients }}
 max_subscriptions_per_client = {{ .RPC.MaxSubscriptionsPerClient }}
 
 # How long to wait for a tx to be committed during /broadcast_tx_commit.
-# WARNING: Using a value larger than 10s will result in increasing the
+# WARNING: Using a value larger than 'WriteTimeout' will result in increasing the
 # global HTTP write timeout, which applies to all connections and endpoints.
 # See https://github.com/tendermint/tendermint/issues/3435
 timeout_broadcast_tx_commit = "{{ .RPC.TimeoutBroadcastTxCommit }}"

node/node.go

@@ -886,6 +886,9 @@ func (n *Node) startRPC() ([]net.Listener, error) {
 	config.MaxBodyBytes = n.config.RPC.MaxBodyBytes
 	config.MaxHeaderBytes = n.config.RPC.MaxHeaderBytes
 	config.MaxOpenConnections = n.config.RPC.MaxOpenConnections
+	config.ReadTimeout = n.config.RPC.ReadTimeout
+	config.WriteTimeout = n.config.RPC.WriteTimeout
+	config.IdleTimeout = n.config.RPC.IdleTimeout
 	// If necessary adjust global WriteTimeout to ensure it's greater than
 	// TimeoutBroadcastTxCommit.
 	// See https://github.com/tendermint/tendermint/issues/3435

rpc/jsonrpc/client/http_json_client.go

@@ -10,6 +10,7 @@ import (
 	"net/url"
 	"strings"
 	"sync"
+	"time"
 
 	"github.com/pkg/errors"
 	amino "github.com/tendermint/go-amino"
@@ -23,6 +24,10 @@ const (
 	protoWSS   = "wss"
 	protoWS    = "ws"
 	protoTCP   = "tcp"
+
+	defaultMaxIdleConns          = 10000
+	defaultIdleConnTimeout       = 60 // sec
+	defaultExpectContinueTimeout = 1  // sec
 )
 
 //-------------------------------------------------------------
@@ -369,8 +374,12 @@ func DefaultHTTPClient(remoteAddr string) (*http.Client, error) {
 	client := &http.Client{
 		Transport: &http.Transport{
 			// Set to true to prevent GZIP-bomb DoS attacks
-			DisableCompression: true,
-			Dial:               dialFn,
+			DisableCompression:    true,
+			Dial:                  dialFn,
+			MaxIdleConns:          defaultMaxIdleConns,
+			MaxIdleConnsPerHost:   defaultMaxIdleConns,
+			IdleConnTimeout:       defaultIdleConnTimeout * time.Second,
+			ExpectContinueTimeout: defaultExpectContinueTimeout * time.Second,
 		},
 	}
 

rpc/jsonrpc/server/http_server.go

@@ -27,6 +27,8 @@ type Config struct {
 	ReadTimeout time.Duration
 	// mirrors http.Server#WriteTimeout
 	WriteTimeout time.Duration
+	// mirrors http.Server#IdleTimeout
+	IdleTimeout time.Duration
 	// MaxBodyBytes controls the maximum number of bytes the
 	// server will read parsing the request body.
 	MaxBodyBytes int64
@@ -40,6 +42,7 @@ func DefaultConfig() *Config {
 		MaxOpenConnections: 0, // unlimited
 		ReadTimeout:        10 * time.Second,
 		WriteTimeout:       10 * time.Second,
+		IdleTimeout:        60 * time.Second,
 		MaxBodyBytes:       int64(1000000), // 1MB
 		MaxHeaderBytes:     1 << 20,        // same as the net/http default
 	}
@@ -56,6 +59,7 @@ func Serve(listener net.Listener, handler http.Handler, logger log.Logger, confi
 		Handler:        RecoverAndLogHandler(maxBytesHandler{h: handler, n: config.MaxBodyBytes}, logger),
 		ReadTimeout:    config.ReadTimeout,
 		WriteTimeout:   config.WriteTimeout,
+		IdleTimeout:    config.IdleTimeout,
 		MaxHeaderBytes: config.MaxHeaderBytes,
 	}
 	err := s.Serve(listener)
@@ -81,6 +85,7 @@ func ServeTLS(
 		Handler:        RecoverAndLogHandler(maxBytesHandler{h: handler, n: config.MaxBodyBytes}, logger),
 		ReadTimeout:    config.ReadTimeout,
 		WriteTimeout:   config.WriteTimeout,
+		IdleTimeout:    config.IdleTimeout,
 		MaxHeaderBytes: config.MaxHeaderBytes,
 	}
 	err := s.ServeTLS(listener, certFile, keyFile)