Printer Profiles Slic3r Prusa Edition Settings
Your printer profile within Octolapse can be customized to work with Slic3r Prusa Edition, making it easier and more intuitive to copy your slicer settings into Octolapse. All of the controls have been tailored to match Slic3r PE as closely as possible. Just select 'Slic3r Prusa Edition' from the 'Slicer Type' drop down within your current printer profile. This will also customize the 'Feature Detection' print quality settings within your snapshot profile to match Slic3r PE's terminology.
click to see Slic3r PE settings within the Octolapse printer profile
Can be found in 'Printer Settings->Extruder->Retraction' in Slic3r PE.
click to see the extruder retraction settings within Slic3r PE
Controls the retraction length for Octolapse moves. Also used for 'Extruder State Requirements' quality setting within the snapshot profiles.
The height that Octolapse will lift before moving when 'Lift Before Move' is enabled within the snapshot profile. Also used to detect lifting for use with the 'Trigger on Z-Hop' only snapshot profile setting. If set to 0, lifting and lift detection will be disabled.
Determines the retraction speed for Octolapse moves. Also used to detect retraction within the snapshot 'Feature Detection' quality settings.
Determines the deretraction speed for Octolapse moves. Also used to detect deretraction within the snapshot 'Feature Detection' quality settings.
Can be found in 'Print Settings->Speed section in Slic3r PE.
click to see the speed settings within Slic3r PE
A collection of speeds used for print moves, found within the Print Settings->Speed->Speed for print moves section
The speed at which perimeters are printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which small perimeters are printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which external perimeters are is printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which infill is printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which solid infill is printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which top solid infill is printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which support structures are printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed at which bridges are printed. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
The speed used for printing gaps. This setting is used within the 'Feature Detection' print quality setting within the snapshot profile.
A collection of speeds used for non-print moves, found within the Print Settings->Speed->Speed for non-print moves section
This setting controls both Octolapse movement (travel) speed as well as feature detection within the snapshot profile. Higher values here will reduce the amount of time Octolapse adds to a print.
Used to override print and non-print movement speeds.
The speed at which the first layer will print.