Freescale · otavio · Nov 8, 2020 · Sep 7, 2020 · Sep 7, 2020 · Oct 20, 2020
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
@@ -5462,6 +5462,14 @@
 			as generic guest with no PV drivers. Currently support
 			XEN HVM, KVM, HYPER_V and VMWARE guest.
 
+	xen.event_eoi_delay=	[XEN]
+			How long to delay EOI handling in case of event
+			storms (jiffies). Default is 10.
+
+	xen.event_loop_timeout=	[XEN]
+			After which time (jiffies) the event handling loop
+			should start to delay EOI handling. Default is 2.
+
 	xirc2ps_cs=	[NET,PCMCIA]
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]

diff --git a/Documentation/media/uapi/v4l/colorspaces-defs.rst b/Documentation/media/uapi/v4l/colorspaces-defs.rst
@@ -36,8 +36,7 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
 :c:type:`v4l2_hsv_encoding` specifies which encoding is used.
 
 .. note:: The default R'G'B' quantization is full range for all
-   colorspaces except for BT.2020 which uses limited range R'G'B'
-   quantization.
+   colorspaces. HSV formats are always full range.
 
 .. tabularcolumns:: |p{6.7cm}|p{10.8cm}|
 
@@ -169,8 +168,8 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
       - Details
     * - ``V4L2_QUANTIZATION_DEFAULT``
       - Use the default quantization encoding as defined by the
-	colorspace. This is always full range for R'G'B' (except for the
-	BT.2020 colorspace) and HSV. It is usually limited range for Y'CbCr.
+	colorspace. This is always full range for R'G'B' and HSV.
+	It is usually limited range for Y'CbCr.
     * - ``V4L2_QUANTIZATION_FULL_RANGE``
       - Use the full range quantization encoding. I.e. the range [0…1] is
 	mapped to [0…255] (with possible clipping to [1…254] to avoid the
@@ -180,4 +179,4 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
     * - ``V4L2_QUANTIZATION_LIM_RANGE``
       - Use the limited range quantization encoding. I.e. the range [0…1]
 	is mapped to [16…235]. Cb and Cr are mapped from [-0.5…0.5] to
-	[16…240].
+	[16…240]. Limited Range cannot be used with HSV.
diff --git a/Documentation/media/uapi/v4l/colorspaces-details.rst b/Documentation/media/uapi/v4l/colorspaces-details.rst
@@ -377,9 +377,8 @@ Colorspace BT.2020 (V4L2_COLORSPACE_BT2020)
 The :ref:`itu2020` standard defines the colorspace used by Ultra-high
 definition television (UHDTV). The default transfer function is
 ``V4L2_XFER_FUNC_709``. The default Y'CbCr encoding is
-``V4L2_YCBCR_ENC_BT2020``. The default R'G'B' quantization is limited
-range (!), and so is the default Y'CbCr quantization. The chromaticities
-of the primary colors and the white reference are:
+``V4L2_YCBCR_ENC_BT2020``. The default Y'CbCr quantization is limited range.
+The chromaticities of the primary colors and the white reference are:
 
 
 

diff --git a/Makefile b/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 4
-SUBLEVEL = 74
+SUBLEVEL = 75
 EXTRAVERSION =
 NAME = Kleptomaniac Octopus
 

diff --git a/arch/Kconfig b/arch/Kconfig
@@ -405,6 +405,13 @@ config MMU_GATHER_NO_RANGE
 config HAVE_MMU_GATHER_NO_GATHER
 	bool
 
+config ARCH_WANT_IRQS_OFF_ACTIVATE_MM
+	bool
+	help
+	  Temporary select until all architectures can be converted to have
+	  irqs disabled over activate_mm. Architectures that do IPI based TLB
+	  shootdowns should enable this.
+
 config ARCH_HAVE_NMI_SAFE_CMPXCHG
 	bool
 

diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi
@@ -85,7 +85,7 @@
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;

diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
@@ -129,7 +129,7 @@
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;

diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -135,7 +135,7 @@
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;

diff --git a/arch/arc/boot/dts/vdk_axc003.dtsi b/arch/arc/boot/dts/vdk_axc003.dtsi
@@ -46,7 +46,7 @@
 
 	};
 
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0xe0012000 0x200 >;

diff --git a/arch/arc/boot/dts/vdk_axc003_idu.dtsi b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
@@ -54,7 +54,7 @@
 
 	};
 
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0xe0012000 0x200 >;

diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c
@@ -562,7 +562,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 {
 	struct arc_reg_pct_build pct_bcr;
 	struct arc_reg_cc_build cc_bcr;
-	int i, has_interrupts, irq;
+	int i, has_interrupts, irq = -1;
 	int counter_size;	/* in bits */
 
 	union cc_name {
@@ -637,19 +637,28 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 		.attr_groups	= arc_pmu->attr_groups,
 	};
 
-	if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
+	if (has_interrupts) {
+		irq = platform_get_irq(pdev, 0);
+		if (irq >= 0) {
+			int ret;
 
-		arc_pmu->irq = irq;
+			arc_pmu->irq = irq;
 
-		/* intc map function ensures irq_set_percpu_devid() called */
-		request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters",
-				   this_cpu_ptr(&arc_pmu_cpu));
+			/* intc map function ensures irq_set_percpu_devid() called */
+			ret = request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters",
+						 this_cpu_ptr(&arc_pmu_cpu));
+
+			if (!ret)
+				on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
+			else
+				irq = -1;
+		}
 
-		on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
-	} else {
-		arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
 	}
 
+	if (irq == -1)
+		arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
+
 	/*
 	 * perf parser doesn't really like '-' symbol in events name, so let's
 	 * use '_' in arc pct name as it goes to kernel PMU event prefix.

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
@@ -507,8 +507,10 @@ config ARCH_S3C24XX
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_IO_H
+	select S3C2410_WATCHDOG
 	select SAMSUNG_ATAGS
 	select USE_OF
+	select WATCHDOG
 	help
 	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
 	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST

diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -192,6 +192,7 @@
 					fixed-link {
 						speed = <1000>;
 						full-duplex;
+						pause;
 					};
 				};
 			};

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
@@ -328,7 +328,7 @@
 			status = "disabled";
 		};
 
-		target-module@56000000 {
+		sgx_module: target-module@56000000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0x5600fe00 0x4>,
 			      <0x5600fe10 0x4>;

diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
@@ -74,3 +74,13 @@
 };
 
 /include/ "omap443x-clocks.dtsi"
+
+/*
+ * Use dpll_per for sgx at 153.6MHz like droid4 stock v3.0.8 Android kernel
+ */
+&sgx_module {
+	assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>,
+			  <&dpll_per_m7x2_ck>;
+	assigned-clock-rates = <0>, <153600000>;
+	assigned-clock-parents = <&dpll_per_m7x2_ck>;
+};