Skip to content

HBRS-SDP/ss24-gazebo-simulation-freddy

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

85 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ss24-gazebo-simulation-freddy

Simulation of the Freddy robot in Gazebo Harmonic

This repository provides a simulation of the mobile dual-manipulator robot Freddy in the Gazebo Harmonic simulator. The simulation offers independent control of the Robile base, left Kinova arm, and right Kinova arm components of the robot.

freddy-sim-demo.mp4

Features

  • Position, velocity, and effort control for each of the two driven wheels of each Kelo drive of the Robile base
  • Position and velocity trajectory control, and effort joint control, for each Kinova arm
  • Selectable controllers for the Robile base and Kinova arms using launch arguments

Launching the Simulation

Prerequisites

The simulation requires ros2_control and ros2_controllers. Install these packages using the following command:

sudo apt install ros-${ROS_DISTRO}-ros2-control ros-${ROS_DISTRO}-ros2-controllers

The package's dependencies can be installed with the following command:

cd ./src
vcs import < freddy_gazebo/dep.repos

If you are using ROS2 Humble, install Gazebo Harmonic using the following command. Note that Gazebo Harmonic and ROS2 Humble is a 'non-default Gazebo/ROS2 pairing'.

apt-get install ros-humble-ros-gzgarden

When building the workspace, ensure that the environment variable GZ_VERSION is set to harmonic. This can be done with the following command:

export GZ_VERSION=harmonic

The simulation can be launched using the following command:

ros2 launch freddy_gazebo freddy_gazebo.launch.py

By default, the base_controller for controlling the Robile base is a velocity controller and the arm_controller for controlling the Kinova arms is a trajectory_controller. You can customize the base_controller and arm_controller by providing launch arguments, for example:

ros2 launch freddy_gazebo freddy_gazebo.launch.py arm_controller:=joint_trajectory base_controller:=position

Valid values for arm_controller are joint_trajectory and effort. Valid values for base_controller are position, velocity, and effort. The joint_trajectory controller can accept position as well as velocity commands.

Commanding the Robot's Joints

For purposes of demonstration, commands can be given to each joint of each component of the robot through keyboard input. The executable for commanding the robot's joints can be launched using the following command:

ros2 run freddy_gazebo freddy_gazebo

The behaviour of this executable can be changed to match the controllers used when launching freddy_gazebo.launch.py. This can be done by providing arm_controller and base_controller arguments as follows:

ros2 run freddy_gazebo freddy_gazebo --ros-args -p arm_controller:=joint_trajectory_velocity -p base_controller:=velocity

Valid values for arm_controller are joint_trajectory_position, joint_trajectory_velocity, and effort. Valid values for base_controller are position, velocity, and effort. When using a joint_trajectory_velocity command scheme, joint positions are additionally rolled out (or integrated) using the commanded velocity.

The robot can be controlled using the keyboard as follows:

Increment state using     w   e   r   t   y   u   i   o
                          ↑   ↑   ↑   ↑   ↑   ↑   ↑   ↑
                Joint     1   2   3   4   5   6   7   8
                          ↓   ↓   ↓   ↓   ↓   ↓   ↓   ↓
Decrement state using     s   d   f   g   h   j   k   l

Increment state increment step using    +
                                        ↑
                                        ↓
Decrement state decrement step using    -

Choose robot component to command using
                                        q : arm_left
                                        a : arm_right
                                        z : base

Switching the Controllers

The default controllers are loaded automatically, and additional controllers can be loaded using ROS arguments as mentioned above. Alternatively, you can use rqt_controller_manager to switch controllers without restarting the simulation. To switch controllers, first unload the current controller through the UI, then load the desired one, please follow these steps to make sure the correct hardware interfaces are "claimed" and commands run smoothly.

To download rqt_controller_manager, use the following command:

apt install ros-humble-rqt-controller-manager

To run the controller_manager UI, use the following command:

ros2 run rqt_controller_manager rqt_controller_manager --force-discover

In the UI, if controller_manager is not already selected, choose it from the dropdown menu. Select the namespace(controller_manager)

To unload a controller, right-click on the desired controller and select "De-activate and Unload". Unload the controller for left arm/right arm/base

To load the desired controller, right-click on it and select 'Load, Configure and activate'. Load the controller for left arm/right arm/base

System Requirements

The package has the following environment requirements and dependencies:

  • ROS2 Humble
  • Gazebo Harmonic (tested on Gazebo Sim version 8.3.0 and 8.6.0)
  • Python (tested on Python >=3.10)
  • ros2_control framwork for real-time control of robots using ROS2
  • gz_ros2_control package for integrating the ros2_control controller architecture with the Gazebo simulator
  • freddy_description package for the Freddy description files
  • ros2_kortex package for the Kinowa Gen3 7DoF arm description

Note that the Robotiq gripper has not been integrated or tested for the simulation.

References

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages