Skip to content

Easy LoRa Gateway v2.1 is an easy-to-use and PRODUCTION LoRa Gateway for home users and small businesses. This gateway will use an ESP32 with Semtech LoRa SX1278 module Ra-02/RFM95W

License

Notifications You must be signed in to change notification settings

IoTThinks/EasyLoRaGateway_v2.1

Repository files navigation

EasyLoRaGateway v2.1 (Ra02 and RFM95W)

Easy LoRa gateway connects multiple smart IoT Plugs and Nodes in large buildings, factories and farms up to 10 km from the nearest Internet access. Easy LoRa gateway uses LoRa as the transmission protocol via 433+ Mhz/915+ Mhz wave. It enables us to remotely control our smart IoT Plugs and Nodes inexpensively and efficiently.

Previous version:

1. Quick starts

2. Hardware specification

  • 1 x ESP32 chip with WiFi 802.11n and BLE
  • 2 x LoRa SX1278 433MHz (Ai-Thinker Ra02) or 915Mhz (RFM95W)
  • 1 x 100 Mbps Ethernet LAN
  • 1 x Ethernet Console (for debug and upload firmware)
  • 1 x Speaker
  • 1 x LED
  • 1 x Power LED
  • 1 x 5v Power jack
  • Over voltage protection, reverse-polarity protection, short-circuit protection via PTC fuse

3. Appearance

3.1 Components

From inside - Ai-Thinker Ra02 (433Mhz) Easy LoRa Gateway ra02 - Components

From inside - RFM95W (915Mhz) Easy LoRa Gateway v2 1 - RFM95W - Components

3.2 Casing and IOs

From top Easy LoRa Gateway - Top

From bottom Easy LoRa v2 1 - bottom

4. Pin mappings

4.1 Ai-Thinker Ra02 version

Pin mappings from main ESP32 to components

Easy LoRa Gateway v2.1 ra02 - Pin mapping

4.2 RFM95W version

Pin mappings from main ESP32 to components

Easy LoRa Gateway v2 1 RFM95W - Pin mapping

image

image

5. Pinout of MCU and LoRa

5.1 Pinout of ESP32

Datasheet: esp32-wroom-32_datasheet_en.pdf

image

5.2 Pinout of LoRa Ai-Thinker RA-02

Datasheet: LoRa-SX1278-Datasheet.pdf

ra-02

5.3 Pinout of LoRa RFM95W

Datasheet: RFM95W-V2.0.pdf

rfm95w

6. Software feature (In progress)

  • Single or dual channel LoRa gateway
  • Simple local management portal
  • Auto provision of Easy LoRa Plug and Node
  • Forward messages from LoRa to MQTT servers
  • Web Service APIs for integration
  • Auto update firmware via LAN or Internet
  • OPEN SOURCE and commercial version

About

Easy LoRa Gateway v2.1 is an easy-to-use and PRODUCTION LoRa Gateway for home users and small businesses. This gateway will use an ESP32 with Semtech LoRa SX1278 module Ra-02/RFM95W

Resources

License

Stars

Watchers

Forks

Packages

No packages published