OCPBUGS-19303: Changed OKD/FCOS workaround to also support Agent-base…

…d Installer

OKD/FCOS uses FCOS as its bootimage, i.e. when booting cluster nodes
the first time during installation. FCOS does not provide tools such
as OpenShift Client (oc) or crio.service which Agent-based Installer
uses at the rendezvous host, e.g. to launch the bootstrap control
plane.

RHCOS and SCOS include these tools, but FCOS has to pivot the root fs
[1] to okd-machine-os [2] first in order to make those tools available.

Pivoting uses 'rpm-ostree rebase' but the rendezvous host is booted
the first time the node boots from a FCOS Live ISO where the root fs
and /sysroot are mounted read-only. Thus 'rpm-ostree rebase' fails and
necessary tools will not be available, causing the setup to stall.

Until rpm-ostree has implemented support for rebasing Live ISOs [3],
this patch adapts the workaround for SNO installations [4] to also
support Agent-based Installer.

In particular, the Go conditional {{- if .BootstrapInPlace }} which
is used to mark a SNO install has been replaced with a shell if-else
which checks at runtime whether the system is launched from are on a
Live ISO.
Most code in the OpenShift ecosystem is written with RHCOS in mind
and often assumes that tools like oc or crio.service are available.
These assumptions can be satisfied by applying this workaround to all
Live ISO boots. It will not remove functionality or overwrite
configuration files in /etc and thus side effects should be minimal.

The Go conditional {{- if .BootstrapInPlace }} in the release-image-\
pivot.service has been dropped completely. This service is only used
in OKD only, so OCP will not be impacted at all. The 'Before=' option
will not cause systemd to fail if a service does not exist. So, in
case bootkube.service or kubelet.service do not exist, the option will
have no effect.
When bootkube.service or kubelet.service do exist, it must always be
ensured that release-image-pivot.service is started first because it
might reboot the system or change /usr in the Live ISO use case.
So it is safe to drop the Go conditional and ask systemd to always
launch release-image-pivot.service before bootkube.service and
kubelet.service.

[0] https://github.com/openshift/installer/blob/master/data/data/bootstrap/files/usr/local/bin/bootkube.sh.template
[1] https://github.com/openshift/installer/blob/master/data/data/bootstrap/files/usr/local/bin/bootstrap-pivot.sh.template
[2] https://github.com/openshift/okd-machine-os
[3] coreos/rpm-ostree#4547
[4] openshift#7445

(cherry picked from commit b2bbc85)

data/data/bootstrap/files/usr/local/bin/bootstrap-pivot.sh.template

@@ -42,25 +42,72 @@ if [ ! -f /opt/openshift/.pivot-done ]; then
   record_service_stage_start "rebase-to-okd-os-image"
 {{if .IsFCOS -}}
   mnt="$(podman image mount "${MACHINE_OS_IMAGE}")"
-{{- if or (.BootstrapInPlace) (eq .Invoker "agent-installer") }}
-  # SNO setup boots into Live ISO which cannot be rebased
-  # https://github.com/coreos/rpm-ostree/issues/4547
-  mkdir /var/mnt/{upper,worker}
-  mount -t overlay overlay -o "lowerdir=/usr:$mnt/usr" /usr
-  mount -t overlay overlay -o "lowerdir=/etc:$mnt/etc,upperdir=/var/mnt/upper,workdir=/var/mnt/worker" /etc
-  systemctl daemon-reload
 
-  # Workaround for SELinux denials when launching crio.service from overlayfs
-  setenforce Permissive
+  # The bootstrap host during SNO installation and the rendezvous host of Agent-based Installer both boot into a Live
+  # ISO which cannot be rebased. Until rpm-ostree supports this live rebase [0], the following workaround will mount the
+  # proper OKD/FCOS Machine OS image over the existing mount at /usr and copy new config files to /etc.
+  # [0] https://github.com/coreos/rpm-ostree/issues/4547
+  if grep -q coreos.liveiso= /proc/cmdline; then
+    mount -t tmpfs -o size=50% none /var/mnt/
+    rsync -aHAXx "$mnt/" /var/mnt/
+    mount -t overlay overlay -o lowerdir=/usr:/var/mnt/usr /usr
+    rsync -rlt --ignore-existing /var/mnt/etc/ /etc/
 
-  systemctl start crio.service
-  # No reboot necessary because SNO setup will reboot system
-{{ else }}
-  pushd "${mnt}/bootstrap"
-    # shellcheck disable=SC1091
-    . ./pre-pivot.sh
-  popd
-{{ end -}}
+    # Agent-based Installer will launch a ephemeral control plane at the rendezvous host which will create and publish
+    # Ignition configs for the other master nodes. These Ignition configs must match what the in-cluster control plane
+    # would generate else machine config operator will fail [0]. Because the rendezvous host is booted with a FCOS Live
+    # ISO without any OKD/FCOS related changes, we have to copy the manifests from OKD Machine OS manually to the
+    # bootstrap manifests folder of the rendezvous host.
+    # [0] https://access.redhat.com/solutions/4970731
+    mkdir -p /var/opt/openshift/manifests
+    cp -av /var/mnt/manifests/*.* /var/opt/openshift/manifests/
+
+    # Load new systemd unit files and configuration such as crio.service after mounting the content of OKD/FCOS Machine
+    # OS over /usr and copying new files to /etc
+    systemctl daemon-reload
+
+    # Apply presets from OKD Machine OS
+    systemctl preset-all
+
+    # On OKD/FCOS prior to commit e859a66 [0] systemd-resolved is used by default and NetworkManager's DNS handling is
+    # disabled. In this case, CoreDNS fails to listen to 127.0.0.53:53 when Agent-based Installer boots its the
+    # rendezvous host with a Fedora CoreOS bootimage because by default FCOS' systemd-resolved already listens to this
+    # port. OKD/FCOS disables resolved's stub listener [1] but the resolved must be restarted for this setting to take
+    # effect.
+    # On OKD/FCOS since commit e859a66 [0] systemd-resolved is disabled by default and NetworkManager's DNS handling is
+    # used. However, the bootimage is vanilla FCOS and thus uses systemd-resolved by default. The latter has to be
+    # disabled after rebasing to OKD Machine OS and NetworkManager as well as the service to fix /etc/resolv.conf have
+    # to be started.
+    # [0] https://github.com/openshift/okd-machine-os/commit/e859a6643330596a8a282aeb4bf853763a2d219e
+    # [1] https://github.com/openshift/okd-machine-os/blob/28dec35d60ea07069366b22ebdcb296d429b15e9/overlay.d/99okd/etc/systemd/resolved.conf.d/okd-no-dns-stub.conf
+    if [ -e /etc/systemd/resolved.conf.d/okd-no-dns-stub.conf ]; then
+        systemctl restart systemd-resolved.service
+    else
+        systemctl disable --now systemd-resolved.service
+    fi
+
+    if systemctl list-unit-files -q fix-resolvconf.service >/dev/null; then
+        systemctl stop NetworkManager.service
+        systemctl start fix-resolvconf.service
+        systemctl start NetworkManager.service
+        nmcli general reload dns-full
+    fi
+
+    # Workaround for SELinux denials when launching crio.service from overlayfs
+    setenforce Permissive
+
+    # crio.service is not part of FCOS but of OKD Machine OS. It will loaded after systemctl daemon-reload above but has
+    # to be started manually
+    systemctl start crio.service
+
+    # No reboot necessary because setup will reboot the system automatically
+  else
+    pushd "${mnt}/bootstrap"
+      # shellcheck disable=SC1091
+      . ./pre-pivot.sh
+    popd
+  fi
+  record_service_stage_success
 {{else if .IsSCOS -}}
   chmod 0644 /etc/containers/registries.conf
   rpm-ostree rebase --experimental "ostree-unverified-registry:${MACHINE_OS_IMAGE}"

data/data/bootstrap/systemd/common/units/kubelet.service.template

@@ -1,7 +1,13 @@
 [Unit]
 Description=Kubernetes Kubelet
 Wants=rpc-statd.service crio.service release-image.service
+{{if .IsOKD -}}
+Wants=release-image-pivot.service
+{{end -}}
 After=crio.service release-image.service
+{{if .IsOKD -}}
+After=release-image-pivot.service
+{{end -}}
 
 [Service]
 Type=notify

data/data/bootstrap/systemd/common/units/release-image-pivot.service.template

@@ -3,11 +3,7 @@
 Description=Pivot bootstrap to the OpenShift Release Image
 Wants=release-image.service
 After=release-image.service
-{{- if or (.BootstrapInPlace) (eq .Invoker "agent-installer") }}
 Before=bootkube.service kubelet.service
-{{ else }}
-Before=bootkube.service
-{{ end -}}
 
 [Service]
 Type=oneshot