Skip to content

KR0SIV/SerLCD_Reset

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

6 Commits
 
 
 
 
 
 

Repository files navigation

SerLCD_Reset

Simple tool to send a CR reset to the SerLCD https://www.sparkfun.com/products/258

The reset will cause the serLCD to reset back to the default 9600 baud rate. I created this tool to reset one that had issues with the backlight not functioning. The device seemed completely dead prior to the reset. Give it a shot.

Example output:

Welcome to the SerLCD Reset Tool!

According to the documentation if you send a CR within the few miliseconds during boot you can reset it.

Please ensure only power and ground are connected, once you start the proceedure connect your UART TX connection to the RX connector on your serLCD package.

['COM1']

Enter com port number ONLY: 1 Press Enter to Start Sending Sending press ctrl-c to stop

About

Simple tool to send a CR reset to the SerLCD

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages