🧑‍💻 Add get_move_distance for rotation/kinematics (MarlinFirmware#25370)

LMBernardo · Mar 19, 2023 · 2388087 · 2388087
1 parent 2ed2687
commit 2388087
Show file tree

Hide file tree

Showing 4 changed files with 139 additions and 73 deletions.
diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp
@@ -1059,6 +1059,88 @@ FORCE_INLINE void segment_idle(millis_t &next_idle_ms) {
   thermalManager.task();  // Returns immediately on most calls
 }
 
+/**
+ * Get distance from displacements along axes and, if required, update move type.
+ */
+float get_move_distance(const xyze_pos_t &diff OPTARG(HAS_ROTATIONAL_AXES, bool &is_cartesian_move)) {
+  if (!(NUM_AXIS_GANG(diff.x, || diff.y, /* skip z */, || diff.i, || diff.j, || diff.k, || diff.u, || diff.v, || diff.w)))
+    return TERN0(HAS_Z_AXIS, ABS(diff.z));
+
+  #if ENABLED(ARTICULATED_ROBOT_ARM)
+
+    // For articulated robots, interpreting feedrate like LinuxCNC would require inverse kinematics. As a workaround, pretend that motors sit on n mutually orthogonal
+    // axes and assume that we could think of distance as magnitude of an n-vector in an n-dimensional Euclidian space.
+    const float distance_sqr = NUM_AXIS_GANG(
+        sq(diff.x), + sq(diff.y), + sq(diff.z),
+      + sq(diff.i), + sq(diff.j), + sq(diff.k),
+      + sq(diff.u), + sq(diff.v), + sq(diff.w)
+    );
+
+  #elif ENABLED(FOAMCUTTER_XYUV)
+
+    const float distance_sqr = (
+      #if HAS_J_AXIS
+        _MAX(sq(diff.x) + sq(diff.y), sq(diff.i) + sq(diff.j)) // Special 5 axis kinematics. Return the larger of plane X/Y or I/J
+      #else
+        sq(diff.x) + sq(diff.y) // Foamcutter with only two axes (XY)
+      #endif
+    );
+
+  #else
+
+    /**
+     * Calculate distance for feedrate interpretation in accordance with NIST RS274NGC interpreter - version 3) and its default CANON_XYZ feed reference mode.
+     * Assume:
+     *   - X, Y, Z are the primary linear axes;
+     *   - U, V, W are secondary linear axes;
+     *   - A, B, C are rotational axes.
+     *
+     * Then:
+     *   - dX, dY, dZ are the displacements of the primary linear axes;
+     *   - dU, dV, dW are the displacements of linear axes;
+     *   - dA, dB, dC are the displacements of rotational axes.
+     *
+     * The time it takes to execute a move command with feedrate F is t = D/F,
+     * plus any time for acceleration and deceleration.
+     * Here, D is the total distance, calculated as follows:
+     *
+     *   D^2 = dX^2 + dY^2 + dZ^2
+     *   if D^2 == 0 (none of XYZ move but any secondary linear axes move, whether other axes are moved or not):
+     *     D^2 = dU^2 + dV^2 + dW^2
+     *   if D^2 == 0 (only rotational axes are moved):
+     *     D^2 = dA^2 + dB^2 + dC^2
+     */
+    float distance_sqr = XYZ_GANG(sq(diff.x), + sq(diff.y), + sq(diff.z));
+
+    #if SECONDARY_LINEAR_AXES
+      if (UNEAR_ZERO(distance_sqr)) {
+        // Move does not involve any primary linear axes (xyz) but might involve secondary linear axes
+        distance_sqr = (
+          SECONDARY_AXIS_GANG(
+            IF_DISABLED(AXIS4_ROTATES, + sq(diff.i)),
+            IF_DISABLED(AXIS5_ROTATES, + sq(diff.j)),
+            IF_DISABLED(AXIS6_ROTATES, + sq(diff.k)),
+            IF_DISABLED(AXIS7_ROTATES, + sq(diff.u)),
+            IF_DISABLED(AXIS8_ROTATES, + sq(diff.v)),
+            IF_DISABLED(AXIS9_ROTATES, + sq(diff.w))
+          )
+        );
+      }
+    #endif
+
+    #if HAS_ROTATIONAL_AXES
+      if (UNEAR_ZERO(distance_sqr)) {
+        // Move involves only rotational axes. Calculate angular distance in accordance with LinuxCNC
+        is_cartesian_move = false;
+        distance_sqr = ROTATIONAL_AXIS_GANG(sq(diff.i), + sq(diff.j), + sq(diff.k), + sq(diff.u), + sq(diff.v), + sq(diff.w));
+      }
+    #endif
+
+  #endif
+
+  return SQRT(distance_sqr);
+}
+
 #if IS_KINEMATIC
 
   #if IS_SCARA
@@ -1109,7 +1191,10 @@ FORCE_INLINE void segment_idle(millis_t &next_idle_ms) {
     if (!position_is_reachable(destination)) return true;
 
     // Get the linear distance in XYZ
-    float cartesian_mm = xyz_float_t(diff).magnitude();
+    #if HAS_ROTATIONAL_AXES
+      bool cartes_move = true;
+    #endif
+    float cartesian_mm = get_move_distance(diff OPTARG(HAS_ROTATIONAL_AXES, cartes_move));
 
     // If the move is very short, check the E move distance
     TERN_(HAS_EXTRUDERS, if (UNEAR_ZERO(cartesian_mm)) cartesian_mm = ABS(diff.e));
@@ -1118,7 +1203,13 @@ FORCE_INLINE void segment_idle(millis_t &next_idle_ms) {
     if (UNEAR_ZERO(cartesian_mm)) return true;
 
     // Minimum number of seconds to move the given distance
-    const float seconds = cartesian_mm / scaled_fr_mm_s;
+    const float seconds = cartesian_mm / (
+      #if BOTH(HAS_ROTATIONAL_AXES, INCH_MODE_SUPPORT)
+        cartes_move ? scaled_fr_mm_s : LINEAR_UNIT(scaled_fr_mm_s)
+      #else
+        scaled_fr_mm_s
+      #endif
+    );
 
     // The number of segments-per-second times the duration
     // gives the number of segments
@@ -1140,6 +1231,7 @@ FORCE_INLINE void segment_idle(millis_t &next_idle_ms) {
 
     // Add hints to help optimize the move
     PlannerHints hints(cartesian_mm * inv_segments);
+    TERN_(HAS_ROTATIONAL_AXES, hints.cartesian_move = cartes_move);
     TERN_(FEEDRATE_SCALING, hints.inv_duration = scaled_fr_mm_s / hints.millimeters);
 
     /*
@@ -1190,9 +1282,13 @@ FORCE_INLINE void segment_idle(millis_t &next_idle_ms) {
       }
 
       // Get the linear distance in XYZ
+      #if HAS_ROTATIONAL_AXES
+        bool cartes_move = true;
+      #endif
+      float cartesian_mm = get_move_distance(diff OPTARG(HAS_ROTATIONAL_AXES, cartes_move));
+
       // If the move is very short, check the E move distance
       // No E move either? Game over.
-      float cartesian_mm = diff.magnitude();
       TERN_(HAS_EXTRUDERS, if (UNEAR_ZERO(cartesian_mm)) cartesian_mm = ABS(diff.e));
       if (UNEAR_ZERO(cartesian_mm)) return;
 
@@ -1207,6 +1303,7 @@ FORCE_INLINE void segment_idle(millis_t &next_idle_ms) {
 
       // Add hints to help optimize the move
       PlannerHints hints(cartesian_mm * inv_segments);
+      TERN_(HAS_ROTATIONAL_AXES, hints.cartesian_move = cartes_move);
       TERN_(FEEDRATE_SCALING, hints.inv_duration = scaled_fr_mm_s / hints.millimeters);
 
       //SERIAL_ECHOPGM("mm=", cartesian_mm);

diff --git a/Marlin/src/module/motion.h b/Marlin/src/module/motion.h
@@ -302,6 +302,8 @@ void report_current_position_projected();
   #endif
 #endif
 
+float get_move_distance(const xyze_pos_t &diff OPTARG(HAS_ROTATIONAL_AXES, bool &is_cartesian_move));
+
 void get_cartesian_from_steppers();
 void set_current_from_steppers_for_axis(const AxisEnum axis);
 

diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp
@@ -2130,8 +2130,8 @@ bool Planner::_populate_block(
 
   TERN_(LCD_SHOW_E_TOTAL, e_move_accumulator += steps_dist_mm.e);
 
-  #if BOTH(HAS_ROTATIONAL_AXES, INCH_MODE_SUPPORT)
-    bool cartesian_move = true;
+  #if HAS_ROTATIONAL_AXES
+    bool cartesian_move = hints.cartesian_move;
   #endif
 
   if (true NUM_AXIS_GANG(
@@ -2152,71 +2152,34 @@ bool Planner::_populate_block(
     if (hints.millimeters)
       block->millimeters = hints.millimeters;
     else {
-      /**
-       * Distance for interpretation of feedrate in accordance with LinuxCNC (the successor of NIST
-       * RS274NGC interpreter - version 3) and its default CANON_XYZ feed reference mode.
-       * Assume that X, Y, Z are the primary linear axes and U, V, W are secondary linear axes and A, B, C are
-       * rotational axes. Then dX, dY, dZ are the displacements of the primary linear axes and dU, dV, dW are the displacements of linear axes and
-       * dA, dB, dC are the displacements of rotational axes.
-       * The time it takes to execute move command with feedrate F is t = D/F, where D is the total distance, calculated as follows:
-       *   D^2 = dX^2 + dY^2 + dZ^2
-       *   if D^2 == 0 (none of XYZ move but any secondary linear axes move, whether other axes are moved or not):
-       *     D^2 = dU^2 + dV^2 + dW^2
-       *   if D^2 == 0 (only rotational axes are moved):
-       *     D^2 = dA^2 + dB^2 + dC^2
-       */
-      float distance_sqr = (
-        #if ENABLED(ARTICULATED_ROBOT_ARM)
-          // For articulated robots, interpreting feedrate like LinuxCNC would require inverse kinematics. As a workaround, pretend that motors sit on n mutually orthogonal
-          // axes and assume that we could think of distance as magnitude of an n-vector in an n-dimensional Euclidian space.
-          NUM_AXIS_GANG(
-              sq(steps_dist_mm.x), + sq(steps_dist_mm.y), + sq(steps_dist_mm.z),
-            + sq(steps_dist_mm.i), + sq(steps_dist_mm.j), + sq(steps_dist_mm.k),
-            + sq(steps_dist_mm.u), + sq(steps_dist_mm.v), + sq(steps_dist_mm.w)
-          )
-        #elif ENABLED(FOAMCUTTER_XYUV)
-          #if HAS_J_AXIS
-            // Special 5 axis kinematics. Return the largest distance move from either X/Y or I/J plane
-            _MAX(sq(steps_dist_mm.x) + sq(steps_dist_mm.y), sq(steps_dist_mm.i) + sq(steps_dist_mm.j))
-          #else // Foamcutter with only two axes (XY)
-            sq(steps_dist_mm.x) + sq(steps_dist_mm.y)
-          #endif
-        #elif ANY(CORE_IS_XY, MARKFORGED_XY, MARKFORGED_YX)
-          XYZ_GANG(sq(steps_dist_mm.head.x), + sq(steps_dist_mm.head.y), + sq(steps_dist_mm.z))
+      const xyze_pos_t displacement = LOGICAL_AXIS_ARRAY(
+        steps_dist_mm.e,
+        #if ANY(CORE_IS_XY, MARKFORGED_XY, MARKFORGED_YX)
+          steps_dist_mm.head.x,
+          steps_dist_mm.head.y,
+          steps_dist_mm.z,
         #elif CORE_IS_XZ
-          XYZ_GANG(sq(steps_dist_mm.head.x), + sq(steps_dist_mm.y),      + sq(steps_dist_mm.head.z))
+          steps_dist_mm.head.x,
+          steps_dist_mm.y,
+          steps_dist_mm.head.z,
         #elif CORE_IS_YZ
-          XYZ_GANG(sq(steps_dist_mm.x),      + sq(steps_dist_mm.head.y), + sq(steps_dist_mm.head.z))
+          steps_dist_mm.x,
+          steps_dist_mm.head.y,
+          steps_dist_mm.head.z,
         #else
-          XYZ_GANG(sq(steps_dist_mm.x),       + sq(steps_dist_mm.y),      + sq(steps_dist_mm.z))
+          steps_dist_mm.x,
+          steps_dist_mm.y,
+          steps_dist_mm.z,
         #endif
+        steps_dist_mm.i,
+        steps_dist_mm.j,
+        steps_dist_mm.k,
+        steps_dist_mm.u,
+        steps_dist_mm.v,
+        steps_dist_mm.w
       );
 
-      #if SECONDARY_LINEAR_AXES && NONE(FOAMCUTTER_XYUV, ARTICULATED_ROBOT_ARM)
-        if (UNEAR_ZERO(distance_sqr)) {
-          // Move does not involve any primary linear axes (xyz) but might involve secondary linear axes
-          distance_sqr = (0.0f
-            SECONDARY_AXIS_GANG(
-              IF_DISABLED(AXIS4_ROTATES, + sq(steps_dist_mm.i)),
-              IF_DISABLED(AXIS5_ROTATES, + sq(steps_dist_mm.j)),
-              IF_DISABLED(AXIS6_ROTATES, + sq(steps_dist_mm.k)),
-              IF_DISABLED(AXIS7_ROTATES, + sq(steps_dist_mm.u)),
-              IF_DISABLED(AXIS8_ROTATES, + sq(steps_dist_mm.v)),
-              IF_DISABLED(AXIS9_ROTATES, + sq(steps_dist_mm.w))
-            )
-          );
-        }
-      #endif
-
-      #if HAS_ROTATIONAL_AXES && NONE(FOAMCUTTER_XYUV, ARTICULATED_ROBOT_ARM)
-        if (UNEAR_ZERO(distance_sqr)) {
-          // Move involves only rotational axes. Calculate angular distance in accordance with LinuxCNC
-          TERN_(INCH_MODE_SUPPORT, cartesian_move = false);
-          distance_sqr = ROTATIONAL_AXIS_GANG(sq(steps_dist_mm.i), + sq(steps_dist_mm.j), + sq(steps_dist_mm.k), + sq(steps_dist_mm.u), + sq(steps_dist_mm.v), + sq(steps_dist_mm.w));
-        }
-      #endif
-
-      block->millimeters = SQRT(distance_sqr);
+      block->millimeters = get_move_distance(displacement OPTARG(HAS_ROTATIONAL_AXES, cartesian_move));
     }
 
     /**
@@ -2354,12 +2317,13 @@ bool Planner::_populate_block(
   // Calculate inverse time for this move. No divide by zero due to previous checks.
   // Example: At 120mm/s a 60mm move involving XYZ axes takes 0.5s. So this will give 2.0.
   // Example 2: At 120°/s a 60° move involving only rotational axes takes 0.5s. So this will give 2.0.
-  float inverse_secs;
-  #if BOTH(HAS_ROTATIONAL_AXES, INCH_MODE_SUPPORT)
-    inverse_secs = inverse_millimeters * (cartesian_move ? fr_mm_s : LINEAR_UNIT(fr_mm_s));
-  #else
-    inverse_secs = fr_mm_s * inverse_millimeters;
-  #endif
+  float inverse_secs = inverse_millimeters * (
+    #if BOTH(HAS_ROTATIONAL_AXES, INCH_MODE_SUPPORT)
+      cartesian_move ? fr_mm_s : LINEAR_UNIT(fr_mm_s)
+    #else
+      fr_mm_s
+    #endif
+  );
 
   // Get the number of non busy movements in queue (non busy means that they can be altered)
   const uint8_t moves_queued = nonbusy_movesplanned();
@@ -3157,9 +3121,7 @@ bool Planner::buffer_line(const xyze_pos_t &cart, const_feedRate_t fr_mm_s
 
     PlannerHints ph = hints;
     if (!hints.millimeters)
-      ph.millimeters = (cart_dist_mm.x || cart_dist_mm.y)
-        ? xyz_pos_t(cart_dist_mm).magnitude()
-        : TERN0(HAS_Z_AXIS, ABS(cart_dist_mm.z));
+      ph.millimeters = get_move_distance(xyze_pos_t(cart_dist_mm) OPTARG(HAS_ROTATIONAL_AXES, ph.cartesian_move));
 
     #if DISABLED(FEEDRATE_SCALING)
 

diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h
@@ -377,6 +377,11 @@ struct PlannerHints {
                                       // would calculate if it knew the as-yet-unbuffered path
   #endif
 
+  #if HAS_ROTATIONAL_AXES
+    bool cartesian_move = true;       // True if linear motion of the tool centerpoint relative to the workpiece occurs.
+                                      // False if no movement of the tool center point relative to the work piece occurs
+                                      // (i.e. the tool rotates around the tool centerpoint)
+  #endif
   PlannerHints(const_float_t mm=0.0f) : millimeters(mm) {}
 };