🔧 Adjust DISABLE_* and DISABLE_INACTIVE_*

MarlinFirmware/Marlin#25422
MarlinFirmware · Feb 24, 2023 · 25b39f2 · 25b39f2
1 parent d57207b
commit 25b39f2
Show file tree

Hide file tree

Showing 643 changed files with 6,430 additions and 6,736 deletions.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -1681,22 +1681,22 @@
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!
-#define DISABLE_X false
-#define DISABLE_Y false
-#define DISABLE_Z false
-//#define DISABLE_I false
-//#define DISABLE_J false
-//#define DISABLE_K false
-//#define DISABLE_U false
-//#define DISABLE_V false
-//#define DISABLE_W false
+//#define DISABLE_X
+//#define DISABLE_Y
+//#define DISABLE_Z
+//#define DISABLE_I
+//#define DISABLE_J
+//#define DISABLE_K
+//#define DISABLE_U
+//#define DISABLE_V
+//#define DISABLE_W
 
 // Turn off the display blinking that warns about possible accuracy reduction
 //#define DISABLE_REDUCED_ACCURACY_WARNING
 
 // @section extruder
 
-#define DISABLE_E false             // Disable the extruder when not stepping
+//#define DISABLE_E                 // Disable the extruder when not stepping
 #define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
 
 // @section motion

diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -1118,20 +1118,19 @@
 
 /**
  * Idle Stepper Shutdown
- * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period.
+ * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
  * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
-#define DISABLE_INACTIVE_X true
-#define DISABLE_INACTIVE_Y true
-#define DISABLE_INACTIVE_Z true  // Set 'false' if the nozzle could fall onto your printed part!
-#define DISABLE_INACTIVE_I true
-#define DISABLE_INACTIVE_J true
-#define DISABLE_INACTIVE_K true
-#define DISABLE_INACTIVE_U true
-#define DISABLE_INACTIVE_V true
-#define DISABLE_INACTIVE_W true
-#define DISABLE_INACTIVE_E true
+#define DISABLE_INACTIVE_X
+#define DISABLE_INACTIVE_Y
+#define DISABLE_INACTIVE_Z  // Disable if the nozzle could fall onto your printed part!
+//#define DISABLE_INACTIVE_I
+//#define DISABLE_INACTIVE_J
+//#define DISABLE_INACTIVE_K
+//#define DISABLE_INACTIVE_U
+//#define DISABLE_INACTIVE_V
+//#define DISABLE_INACTIVE_W
 
 // Default Minimum Feedrates for printing and travel moves
 #define DEFAULT_MINIMUMFEEDRATE             0.0     // (mm/s) Minimum feedrate. Set with M205 S.

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -1683,22 +1683,22 @@
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!
-#define DISABLE_X false
-#define DISABLE_Y false
-#define DISABLE_Z false
-//#define DISABLE_I false
-//#define DISABLE_J false
-//#define DISABLE_K false
-//#define DISABLE_U false
-//#define DISABLE_V false
-//#define DISABLE_W false
+//#define DISABLE_X
+//#define DISABLE_Y
+//#define DISABLE_Z
+//#define DISABLE_I
+//#define DISABLE_J
+//#define DISABLE_K
+//#define DISABLE_U
+//#define DISABLE_V
+//#define DISABLE_W
 
 // Turn off the display blinking that warns about possible accuracy reduction
 //#define DISABLE_REDUCED_ACCURACY_WARNING
 
 // @section extruder
 
-#define DISABLE_E false             // Disable the extruder when not stepping
+//#define DISABLE_E                 // Disable the extruder when not stepping
 #define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
 
 // @section motion

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -1118,20 +1118,19 @@
 
 /**
  * Idle Stepper Shutdown
- * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period.
+ * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
  * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
-#define DISABLE_INACTIVE_X true
-#define DISABLE_INACTIVE_Y true
-#define DISABLE_INACTIVE_Z true  // Set 'false' if the nozzle could fall onto your printed part!
-#define DISABLE_INACTIVE_I true
-#define DISABLE_INACTIVE_J true
-#define DISABLE_INACTIVE_K true
-#define DISABLE_INACTIVE_U true
-#define DISABLE_INACTIVE_V true
-#define DISABLE_INACTIVE_W true
-#define DISABLE_INACTIVE_E true
+#define DISABLE_INACTIVE_X
+#define DISABLE_INACTIVE_Y
+#define DISABLE_INACTIVE_Z  // Disable if the nozzle could fall onto your printed part!
+//#define DISABLE_INACTIVE_I
+//#define DISABLE_INACTIVE_J
+//#define DISABLE_INACTIVE_K
+//#define DISABLE_INACTIVE_U
+//#define DISABLE_INACTIVE_V
+//#define DISABLE_INACTIVE_W
 
 // Default Minimum Feedrates for printing and travel moves
 #define DEFAULT_MINIMUMFEEDRATE             0.0     // (mm/s) Minimum feedrate. Set with M205 S.

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
@@ -1681,22 +1681,22 @@
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!
-#define DISABLE_X false
-#define DISABLE_Y false
-#define DISABLE_Z false
-//#define DISABLE_I false
-//#define DISABLE_J false
-//#define DISABLE_K false
-//#define DISABLE_U false
-//#define DISABLE_V false
-//#define DISABLE_W false
+//#define DISABLE_X
+//#define DISABLE_Y
+//#define DISABLE_Z
+//#define DISABLE_I
+//#define DISABLE_J
+//#define DISABLE_K
+//#define DISABLE_U
+//#define DISABLE_V
+//#define DISABLE_W
 
 // Turn off the display blinking that warns about possible accuracy reduction
 //#define DISABLE_REDUCED_ACCURACY_WARNING
 
 // @section extruder
 
-#define DISABLE_E false             // Disable the extruder when not stepping
+//#define DISABLE_E                 // Disable the extruder when not stepping
 #define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
 
 // @section motion

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
@@ -1118,20 +1118,19 @@
 
 /**
  * Idle Stepper Shutdown
- * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period.
+ * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
  * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
-#define DISABLE_INACTIVE_X true
-#define DISABLE_INACTIVE_Y true
-#define DISABLE_INACTIVE_Z true  // Set 'false' if the nozzle could fall onto your printed part!
-#define DISABLE_INACTIVE_I true
-#define DISABLE_INACTIVE_J true
-#define DISABLE_INACTIVE_K true
-#define DISABLE_INACTIVE_U true
-#define DISABLE_INACTIVE_V true
-#define DISABLE_INACTIVE_W true
-#define DISABLE_INACTIVE_E true
+#define DISABLE_INACTIVE_X
+#define DISABLE_INACTIVE_Y
+#define DISABLE_INACTIVE_Z  // Disable if the nozzle could fall onto your printed part!
+//#define DISABLE_INACTIVE_I
+//#define DISABLE_INACTIVE_J
+//#define DISABLE_INACTIVE_K
+//#define DISABLE_INACTIVE_U
+//#define DISABLE_INACTIVE_V
+//#define DISABLE_INACTIVE_W
 
 // Default Minimum Feedrates for printing and travel moves
 #define DEFAULT_MINIMUMFEEDRATE             0.0     // (mm/s) Minimum feedrate. Set with M205 S.

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
@@ -1681,22 +1681,22 @@
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!
-#define DISABLE_X false
-#define DISABLE_Y false
-#define DISABLE_Z false
-//#define DISABLE_I false
-//#define DISABLE_J false
-//#define DISABLE_K false
-//#define DISABLE_U false
-//#define DISABLE_V false
-//#define DISABLE_W false
+//#define DISABLE_X
+//#define DISABLE_Y
+//#define DISABLE_Z
+//#define DISABLE_I
+//#define DISABLE_J
+//#define DISABLE_K
+//#define DISABLE_U
+//#define DISABLE_V
+//#define DISABLE_W
 
 // Turn off the display blinking that warns about possible accuracy reduction
 //#define DISABLE_REDUCED_ACCURACY_WARNING
 
 // @section extruder
 
-#define DISABLE_E false             // Disable the extruder when not stepping
+//#define DISABLE_E                 // Disable the extruder when not stepping
 #define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
 
 // @section motion

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
@@ -1118,20 +1118,19 @@
 
 /**
  * Idle Stepper Shutdown
- * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period.
+ * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
  * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
-#define DISABLE_INACTIVE_X true
-#define DISABLE_INACTIVE_Y true
-#define DISABLE_INACTIVE_Z true  // Set 'false' if the nozzle could fall onto your printed part!
-#define DISABLE_INACTIVE_I true
-#define DISABLE_INACTIVE_J true
-#define DISABLE_INACTIVE_K true
-#define DISABLE_INACTIVE_U true
-#define DISABLE_INACTIVE_V true
-#define DISABLE_INACTIVE_W true
-#define DISABLE_INACTIVE_E true
+#define DISABLE_INACTIVE_X
+#define DISABLE_INACTIVE_Y
+#define DISABLE_INACTIVE_Z  // Disable if the nozzle could fall onto your printed part!
+//#define DISABLE_INACTIVE_I
+//#define DISABLE_INACTIVE_J
+//#define DISABLE_INACTIVE_K
+//#define DISABLE_INACTIVE_U
+//#define DISABLE_INACTIVE_V
+//#define DISABLE_INACTIVE_W
 
 // Default Minimum Feedrates for printing and travel moves
 #define DEFAULT_MINIMUMFEEDRATE             0.0     // (mm/s) Minimum feedrate. Set with M205 S.

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h
@@ -1750,22 +1750,22 @@
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!
-#define DISABLE_X false
-#define DISABLE_Y false
-#define DISABLE_Z false
-//#define DISABLE_I false
-//#define DISABLE_J false
-//#define DISABLE_K false
-//#define DISABLE_U false
-//#define DISABLE_V false
-//#define DISABLE_W false
+//#define DISABLE_X
+//#define DISABLE_Y
+//#define DISABLE_Z
+//#define DISABLE_I
+//#define DISABLE_J
+//#define DISABLE_K
+//#define DISABLE_U
+//#define DISABLE_V
+//#define DISABLE_W
 
 // Turn off the display blinking that warns about possible accuracy reduction
 //#define DISABLE_REDUCED_ACCURACY_WARNING
 
 // @section extruder
 
-#define DISABLE_E false             // Disable the extruder when not stepping
+//#define DISABLE_E                 // Disable the extruder when not stepping
 #define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
 
 // @section motion

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -1127,20 +1127,19 @@
 
 /**
  * Idle Stepper Shutdown
- * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period.
+ * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
  * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
-#define DISABLE_INACTIVE_X true
-#define DISABLE_INACTIVE_Y true
-#define DISABLE_INACTIVE_Z true  // Set 'false' if the nozzle could fall onto your printed part!
-#define DISABLE_INACTIVE_I true
-#define DISABLE_INACTIVE_J true
-#define DISABLE_INACTIVE_K true
-#define DISABLE_INACTIVE_U true
-#define DISABLE_INACTIVE_V true
-#define DISABLE_INACTIVE_W true
-#define DISABLE_INACTIVE_E true
+#define DISABLE_INACTIVE_X
+#define DISABLE_INACTIVE_Y
+#define DISABLE_INACTIVE_Z  // Disable if the nozzle could fall onto your printed part!
+//#define DISABLE_INACTIVE_I
+//#define DISABLE_INACTIVE_J
+//#define DISABLE_INACTIVE_K
+//#define DISABLE_INACTIVE_U
+//#define DISABLE_INACTIVE_V
+//#define DISABLE_INACTIVE_W
 
 // Default Minimum Feedrates for printing and travel moves
 #define DEFAULT_MINIMUMFEEDRATE             0.0     // (mm/s) Minimum feedrate. Set with M205 S.

diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
@@ -1751,22 +1751,22 @@
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!
-#define DISABLE_X false
-#define DISABLE_Y false
-#define DISABLE_Z false
-//#define DISABLE_I false
-//#define DISABLE_J false
-//#define DISABLE_K false
-//#define DISABLE_U false
-//#define DISABLE_V false
-//#define DISABLE_W false
+//#define DISABLE_X
+//#define DISABLE_Y
+//#define DISABLE_Z
+//#define DISABLE_I
+//#define DISABLE_J
+//#define DISABLE_K
+//#define DISABLE_U
+//#define DISABLE_V
+//#define DISABLE_W
 
 // Turn off the display blinking that warns about possible accuracy reduction
 //#define DISABLE_REDUCED_ACCURACY_WARNING
 
 // @section extruder
 
-#define DISABLE_E false             // Disable the extruder when not stepping
+//#define DISABLE_E                 // Disable the extruder when not stepping
 #define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
 
 // @section motion

diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -1118,20 +1118,19 @@
 
 /**
  * Idle Stepper Shutdown
- * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period.
+ * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
  * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
-#define DISABLE_INACTIVE_X true
-#define DISABLE_INACTIVE_Y true
-#define DISABLE_INACTIVE_Z true  // Set 'false' if the nozzle could fall onto your printed part!
-#define DISABLE_INACTIVE_I true
-#define DISABLE_INACTIVE_J true
-#define DISABLE_INACTIVE_K true
-#define DISABLE_INACTIVE_U true
-#define DISABLE_INACTIVE_V true
-#define DISABLE_INACTIVE_W true
-#define DISABLE_INACTIVE_E true
+#define DISABLE_INACTIVE_X
+#define DISABLE_INACTIVE_Y
+#define DISABLE_INACTIVE_Z  // Disable if the nozzle could fall onto your printed part!
+//#define DISABLE_INACTIVE_I
+//#define DISABLE_INACTIVE_J
+//#define DISABLE_INACTIVE_K
+//#define DISABLE_INACTIVE_U
+//#define DISABLE_INACTIVE_V
+//#define DISABLE_INACTIVE_W
 
 // Default Minimum Feedrates for printing and travel moves
 #define DEFAULT_MINIMUMFEEDRATE             0.0     // (mm/s) Minimum feedrate. Set with M205 S.