Align some temp settings (#437)

MarlinFirmware · Mar 29, 2021 · 56a75f7 · 56a75f7
1 parent 0092f12
commit 56a75f7
Show file tree

Hide file tree

Showing 259 changed files with 2,068 additions and 2,068 deletions.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -437,17 +437,17 @@
 //#define TEMP_SENSOR_1_AS_REDUNDANT
 #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
 
-#define TEMP_RESIDENCY_TIME     10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
+#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
 
-#define TEMP_BED_RESIDENCY_TIME 10  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
+#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
 
 #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW      1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS  3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
 
 // Below this temperature the heater will be switched off
 // because it probably indicates a broken thermistor wire.

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -438,17 +438,17 @@
 //#define TEMP_SENSOR_1_AS_REDUNDANT
 #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
 
-#define TEMP_RESIDENCY_TIME      5  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_RESIDENCY_TIME          5  // (seconds) Time to wait for hotend to "settle" in M109
+#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
 
-#define TEMP_BED_RESIDENCY_TIME  5  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_BED_RESIDENCY_TIME      5  // (seconds) Time to wait for bed to "settle" in M190
+#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
 
 #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW      1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS  3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
 
 // Below this temperature the heater will be switched off
 // because it probably indicates a broken thermistor wire.

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
@@ -437,17 +437,17 @@
 //#define TEMP_SENSOR_1_AS_REDUNDANT
 #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
 
-#define TEMP_RESIDENCY_TIME     10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
+#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
 
-#define TEMP_BED_RESIDENCY_TIME 10  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
+#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
 
 #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW      1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS  3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
 
 // Below this temperature the heater will be switched off
 // because it probably indicates a broken thermistor wire.

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
@@ -437,17 +437,17 @@
 //#define TEMP_SENSOR_1_AS_REDUNDANT
 #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
 
-#define TEMP_RESIDENCY_TIME     10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
+#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
 
-#define TEMP_BED_RESIDENCY_TIME 10  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
+#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
 
 #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW      1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS  3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
 
 // Below this temperature the heater will be switched off
 // because it probably indicates a broken thermistor wire.

diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -437,17 +437,17 @@
 //#define TEMP_SENSOR_1_AS_REDUNDANT
 #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
 
-#define TEMP_RESIDENCY_TIME     10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
+#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
 
-#define TEMP_BED_RESIDENCY_TIME  0  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_BED_RESIDENCY_TIME      0  // (seconds) Time to wait for bed to "settle" in M190
+#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
 
 #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW      1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS  3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
 
 // Below this temperature the heater will be switched off
 // because it probably indicates a broken thermistor wire.

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h
@@ -475,17 +475,17 @@
 //#define TEMP_SENSOR_1_AS_REDUNDANT
 #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
 
-#define TEMP_RESIDENCY_TIME     10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
+#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
 
-#define TEMP_BED_RESIDENCY_TIME 10  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
+#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
 
 #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW      1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS  3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
 
 // Below this temperature the heater will be switched off
 // because it probably indicates a broken thermistor wire.

diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
@@ -475,17 +475,17 @@
 //#define TEMP_SENSOR_1_AS_REDUNDANT
 #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
 
-#define TEMP_RESIDENCY_TIME     10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
+#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
 
-#define TEMP_BED_RESIDENCY_TIME 10  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
+#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
 
 #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW      1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS  3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
 
 // Below this temperature the heater will be switched off
 // because it probably indicates a broken thermistor wire.

diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
@@ -437,17 +437,17 @@
 //#define TEMP_SENSOR_1_AS_REDUNDANT
 #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
 
-#define TEMP_RESIDENCY_TIME     10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
+#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
 
-#define TEMP_BED_RESIDENCY_TIME 10  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
+#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
 
 #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW      1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS  3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
 
 // Below this temperature the heater will be switched off
 // because it probably indicates a broken thermistor wire.

diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -437,17 +437,17 @@
 //#define TEMP_SENSOR_1_AS_REDUNDANT
 #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
 
-#define TEMP_RESIDENCY_TIME     10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
+#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
 
-#define TEMP_BED_RESIDENCY_TIME 10  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
+#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
 
 #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW      1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS  3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
 
 // Below this temperature the heater will be switched off
 // because it probably indicates a broken thermistor wire.

diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
@@ -437,17 +437,17 @@
 //#define TEMP_SENSOR_1_AS_REDUNDANT
 #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
 
-#define TEMP_RESIDENCY_TIME     10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
+#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
 
-#define TEMP_BED_RESIDENCY_TIME 10  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_BED_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
+#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
 
 #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
-#define TEMP_CHAMBER_WINDOW      1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_CHAMBER_HYSTERESIS  3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_CHAMBER_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_CHAMBER_HYSTERESIS      3  // (°C) Temperature proximity considered "close enough" to the target
 
 // Below this temperature the heater will be switched off
 // because it probably indicates a broken thermistor wire.