Board IDs for G2560 Rev B, G2560 v4, GTM32 VD (#21499)

Marlin/src/core/boards.h

@@ -146,17 +146,19 @@
 #define BOARD_ELEFU_3                 1311  // Elefu Ra Board (v3)
 #define BOARD_LEAPFROG                1312  // Leapfrog
 #define BOARD_MEGACONTROLLER          1313  // Mega controller
-#define BOARD_GT2560_REV_A            1314  // Geeetech GT2560 Rev. A
-#define BOARD_GT2560_REV_A_PLUS       1315  // Geeetech GT2560 Rev. A+ (with auto level probe)
-#define BOARD_GT2560_V3               1316  // Geeetech GT2560 Rev B for A10(M/D)
-#define BOARD_GT2560_V3_MC2           1317  // Geeetech GT2560 Rev B for Mecreator2
-#define BOARD_GT2560_V3_A20           1318  // Geeetech GT2560 Rev B for A20(M/D)
-#define BOARD_EINSTART_S              1319  // Einstart retrofit
-#define BOARD_WANHAO_ONEPLUS          1320  // Wanhao 0ne+ i3 Mini
-#define BOARD_LEAPFROG_XEED2015       1321  // Leapfrog Xeed 2015
-#define BOARD_PICA_REVB               1322  // PICA Shield (original version)
-#define BOARD_PICA                    1323  // PICA Shield (rev C or later)
-#define BOARD_INTAMSYS40              1324  // Intamsys 4.0 (Funmat HT)
+#define BOARD_GT2560_REV_A            1314  // Geeetech GT2560 Rev A
+#define BOARD_GT2560_REV_A_PLUS       1315  // Geeetech GT2560 Rev A+ (with auto level probe)
+#define BOARD_GT2560_REV_B            1316  // Geeetech GT2560 Rev B
+#define BOARD_GT2560_V3               1317  // Geeetech GT2560 Rev B for A10(M/D)
+#define BOARD_GT2560_V4               1318  // Geeetech GT2560 Rev B for A10(M/D)
+#define BOARD_GT2560_V3_MC2           1319  // Geeetech GT2560 Rev B for Mecreator2
+#define BOARD_GT2560_V3_A20           1320  // Geeetech GT2560 Rev B for A20(M/D)
+#define BOARD_EINSTART_S              1321  // Einstart retrofit
+#define BOARD_WANHAO_ONEPLUS          1322  // Wanhao 0ne+ i3 Mini
+#define BOARD_LEAPFROG_XEED2015       1323  // Leapfrog Xeed 2015
+#define BOARD_PICA_REVB               1324  // PICA Shield (original version)
+#define BOARD_PICA                    1325  // PICA Shield (rev C or later)
+#define BOARD_INTAMSYS40              1326  // Intamsys 4.0 (Funmat HT)
 
 //
 // ATmega1281, ATmega2561
@@ -341,6 +343,7 @@
 #define BOARD_FLSUN_HISPEED           4046  // FLSUN HiSpeedV1 (STM32F103VET6)
 #define BOARD_BEAST                   4047  // STM32F103RET6 Libmaple-based controller
 #define BOARD_MINGDA_MPX_ARM_MINI     4048  // STM32F103ZET6 Mingda MD-16
+#define BOARD_GTM32_PRO_VD            4049  // STM32F103VET6 controller
 
 //
 // ARM Cortex-M4F

Marlin/src/pins/mega/pins_GT2560_REV_B.h

@@ -0,0 +1,30 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Geeetech GT2560 Rev B Pins
+ */
+
+#define BOARD_INFO_NAME "GT2560 Rev B"
+
+#include "pins_GT2560_V3.h"

Marlin/src/pins/mega/pins_GT2560_V3.h

@@ -22,14 +22,16 @@
 #pragma once
 
 /**
- * Geeetech GT2560 RevB + GT2560 3.0/3.1 + GT2560 4.0/4.1 pin assignments
+ * Geeetech GT2560 3.0/3.1 pin assignments
+ *
+ * Also GT2560 RevB and GT2560 4.0/4.1
  */
 
 #define ALLOW_MEGA1280
 #include "env_validate.h"
 
 #ifndef BOARD_INFO_NAME
-  #define BOARD_INFO_NAME "GT2560 RevB/3.x/4.x"
+  #define BOARD_INFO_NAME "GT2560 3.x"
 #endif
 
 //

Marlin/src/pins/mega/pins_GT2560_V4.h

@@ -0,0 +1,30 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Geeetech GT2560 V4.X Pins
+ */
+
+#define BOARD_INFO_NAME "GT2560 4.x"
+
+#include "pins_GT2560_V3.h"

Marlin/src/pins/pins.h

@@ -244,6 +244,10 @@
   #include "mega/pins_GT2560_REV_A_PLUS.h"      // ATmega2560, ATmega1280                 env:mega2560 env:mega1280
 #elif MB(GT2560_V3)
   #include "mega/pins_GT2560_V3.h"              // ATmega2560                             env:mega2560
+#elif MB(GT2560_REV_B)
+  #include "mega/pins_GT2560_REV_B.h"           // ATmega2560                             env:mega2560
+#elif MB(GT2560_V4)
+  #include "mega/pins_GT2560_V4.h"              // ATmega2560                             env:mega2560
 #elif MB(GT2560_V3_MC2)
   #include "mega/pins_GT2560_V3_MC2.h"          // ATmega2560                             env:mega2560
 #elif MB(GT2560_V3_A20)
@@ -470,6 +474,8 @@
   #include "stm32f1/pins_STM3R_MINI.h"          // STM32F1                                env:STM32F103RE
 #elif MB(GTM32_PRO_VB)
   #include "stm32f1/pins_GTM32_PRO_VB.h"        // STM32F1                                env:STM32F103RE
+#elif MB(GTM32_PRO_VD)
+  #include "stm32f1/pins_GTM32_PRO_VD.h"        // STM32F1                                env:STM32F103RE
 #elif MB(GTM32_MINI)
   #include "stm32f1/pins_GTM32_MINI.h"          // STM32F1                                env:STM32F103RE
 #elif MB(GTM32_MINI_A30)

Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h

@@ -22,13 +22,17 @@
 #pragma once
 
 /**
- * Geeetech GTM32 Pro VB/VD board pin assignments
+ * Geeetech GTM32 Pro VB board pin assignments
  * http://www.geeetech.com/wiki/index.php/File:Hardware_GTM32_PRO_VB.pdf
+ *
+ * Also applies to GTM32 Pro VD
  */
 
 #include "env_validate.h"
 
-#define BOARD_INFO_NAME      "GTM32 Pro VB/VD"
+#ifndef BOARD_INFO_NAME
+  #define BOARD_INFO_NAME    "GTM32 Pro VB"
+#endif
 #define DEFAULT_MACHINE_NAME "STM32F103VET6"
 
 #define BOARD_NO_NATIVE_USB

Marlin/src/pins/stm32f1/pins_GTM32_PRO_VD.h

@@ -0,0 +1,30 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Geeetech GTM32 Pro VD board pin assignments
+ */
+
+#define BOARD_INFO_NAME "GTM32 Pro VD"
+
+#include "pins_GTM32_PRO_VB.h"