Merge pull request #3928 from thinkyhead/rc_allen_key_cleanup

Remove excess allen key probe examples from configs
MarlinFirmware · Jun 1, 2016 · 2bd4f33 · 2bd4f33
2 parents 1a01a44 + 43a71ef
commit 2bd4f33
Show file tree

Hide file tree

Showing 5 changed files with 23 additions and 242 deletions.
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -691,60 +691,17 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
     // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29,
     // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe.
 
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10
-
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ
-
-    // Kossel Mini
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 35.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 72.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE (HOMING_FEEDRATE_XYZ)/10
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y 0.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10
-
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_X -46.0 // Move the probe into position
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 59.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 28.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_X -46.0 // Move the nozzle down further to push the probe into retracted position.
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 59.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 8.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_X -46.0 // Raise things back up slightly so we don't bump into anything
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 59.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 38.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ
-
-    // Kossel Pro
+    // Just like Kossel Pro
     #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt
     #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00
     #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
     #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ
+
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE HOMING_FEEDRATE_XYZ
+
     #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X 45.00 // Move right to trigger deploy pin
     #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y -125.00
     #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z 100.0
@@ -754,15 +711,18 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
     #define Z_PROBE_ALLEN_KEY_STOW_1_Y -122.00
     #define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0
     #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ
+
     #define Z_PROBE_ALLEN_KEY_STOW_2_X 36.00 // move down to retract probe
     #define Z_PROBE_ALLEN_KEY_STOW_2_Y -122.00
     #define Z_PROBE_ALLEN_KEY_STOW_2_Z 25.0
     #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/2
+
     #define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0  // return to 0,0,100
     #define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0
     #define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0
     #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ
-  #endif
+
+  #endif // Z_PROBE_ALLEN_KEY
 
   // If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
   // it is highly recommended you also enable Z_SAFE_HOMING below!

diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -695,6 +695,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
     #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS
     #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
     #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ
+
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
@@ -704,65 +705,18 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
     #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0
     #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0
     #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ
+
     #define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down
     #define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0
     #define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0
     #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10
+
     #define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear
     #define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0
     #define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0
     #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ
 
-    // Kossel Mini
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 35.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 72.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE (HOMING_FEEDRATE_XYZ)/10
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y 0.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10
-
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_X -46.0 // Move the probe into position
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 59.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 28.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_X -46.0 // Move the nozzle down further to push the probe into retracted position.
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 59.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 8.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_X -46.0 // Raise things back up slightly so we don't bump into anything
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 59.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 38.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ
-
-    // Kossel Pro
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE HOMING_FEEDRATE_XYZ
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_X 45.00 // Move right to trigger deploy pin
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y -125.00
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE (HOMING_FEEDRATE_XYZ)/2
-
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_X 36.00 // Line up with bed retaining clip
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_Y -122.00
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_X 36.00 // move down to retract probe
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_Y -122.00
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 25.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/2
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0  // return to 0,0,100
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ
-  #endif
+  #endif // Z_PROBE_ALLEN_KEY
 
   // If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
   // it is highly recommended you also enable Z_SAFE_HOMING below!

diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -691,33 +691,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
     // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29,
     // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe.
 
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10
-
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ
-
     // Kossel Mini
     #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0
     #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS
     #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
     #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_TRAVEL_SPEED
+
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
@@ -740,33 +719,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
     #define Z_PROBE_ALLEN_KEY_STOW_3_Z  (Z_PROBE_ALLEN_KEY_STOW_1_Z+Z_PROBE_ALLEN_KEY_STOW_DEPTH)
     #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_TRAVEL_SPEED/2)
 
-    // Kossel Pro
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE HOMING_FEEDRATE_XYZ
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_X 45.00 // Move right to trigger deploy pin
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y -125.00
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE (HOMING_FEEDRATE_XYZ)/2
-
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_X 36.00 // Line up with bed retaining clip
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_Y -122.00
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_X 36.00 // move down to retract probe
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_Y -122.00
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 25.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/2
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0  // return to 0,0,100
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ
-  #endif
+  #endif // Z_PROBE_ALLEN_KEY
 
   // If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
   // it is highly recommended you also enable Z_SAFE_HOMING below!

diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -682,60 +682,17 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
     // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29,
     // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe.
 
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10
-
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ
-
-    // Kossel Mini
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 35.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 72.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE (HOMING_FEEDRATE_XYZ)/10
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y 0.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
-    //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10
-
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_X -46.0 // Move the probe into position
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 59.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 28.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_X -46.0 // Move the nozzle down further to push the probe into retracted position.
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 59.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 8.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/10
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_X -46.0 // Raise things back up slightly so we don't bump into anything
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 59.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 38.0
-    //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ
-
     // Kossel Pro
     #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt
     #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00
     #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
     #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_XYZ
+
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z Z_PROBE_ALLEN_KEY_DEPLOY_1_Z
     #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE HOMING_FEEDRATE_XYZ
+
     #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X 45.00 // Move right to trigger deploy pin
     #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y -125.00
     #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z Z_PROBE_ALLEN_KEY_DEPLOY_2_Z
@@ -745,15 +702,18 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
     #define Z_PROBE_ALLEN_KEY_STOW_1_Y -125.00
     #define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0
     #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_XYZ
+
     #define Z_PROBE_ALLEN_KEY_STOW_2_X Z_PROBE_ALLEN_KEY_STOW_1_X // move down to retract probe
     #define Z_PROBE_ALLEN_KEY_STOW_2_Y Z_PROBE_ALLEN_KEY_STOW_1_Y
     #define Z_PROBE_ALLEN_KEY_STOW_2_Z 0.0
     #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_XYZ)/2
+
     #define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0  // return to 0,0,100
     #define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0
     #define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0
     #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_XYZ
-  #endif
+
+  #endif // Z_PROBE_ALLEN_KEY
 
   // If you've enabled AUTO_BED_LEVELING_FEATURE and are using the Z Probe for Z Homing,
   // it is highly recommended you also enable Z_SAFE_HOMING below!